Search Results

Optimization of engine startup from crank to catalyst light-off is essential for achieving low emissions. For Spark Ignition Direct Injected (SIDI) engines, this requires optimization of the piston crown features, spray characteristics and control strategy. In this case study, high speed endoscope imaging was used to provide a qualitative confirmation of CFD spray predictions and to provide insight into engine starting in a “real” engine environment. The effect of piston feature was initially evaluated in a single cylinder engine running the dual-injection catalyst heating mode. The piston features were also assessed at part load and wide open throttle. The videos of the spray development were compared to CFD predictions. In the example case reported here, endoscope imaging showed that the baseline piston bowl was not effective in deflecting the spray toward the spark plug. Moving the piston bowl toward the injector gave a visible improvement in the spray deflection.

Implementation of engine turnoff at idle is desirable to gain improvements in vehicle fuel economy. There are a number of alternatives for implementation of the restarting function, including the existing cranking motor, a 12V or 36V belt-starter, a crankshaft integrated-starter-generator (ISG), and other, more complex hybrid powertrain architectures. Of these options, the 12V belt-alternator-starter (BAS) offers strong potential for fast, quiet starting at a lower system cost and complexity than higher-power 36V alternatives. Two challenges are 1) the need to accelerate a large engine to idle speed quickly, and 2) dynamic torque control during the start for smoothness. In the absence of a higher power electrical machine to accomplish these tasks, combustion-assisted starting has been studied as a potential method of aiding a 12V accessory drive belt-alternator-starter in the starting process on larger engines.