Search Results

Diesel NOx emissions control utilizing combined Lean NOx Trap (LNT) and so-called passive or in-situ Selective Catalytic Reduction (SCR) catalyst technologies (i.e. with reductant species generated by the LNT) has been the subject of several previous papers from our laboratory [ 1 - 2 ]. The present study focuses on hydrocarbon (HC) emissions control via the same LNT+SCR catalyst technology under FTP driving conditions. HC emissions control can be as challenging as NOx control under both current and future federal and California/Green State emission standards. However, as with NOx control, the combined LNT+SCR approach offers advantages for HC emission control over LNT-only aftertreatment. The incremental conversion obtained with the SCR catalyst is shown, both on the basis of vehicle and laboratory tests, to result primarily from HC adsorbed on the SCR catalyst during rich LNT purges that reacts during subsequent lean engine operation.

In the 1999 Supplemental Notice for Proposed Rulemaking (SNPRM) for Advanced Airbags, the National Highway Traffic Safety Administration (NHTSA) sought comments on the maximum speed at which the high-speed, unbelted occupant test suite will be conducted, i.e., 48 kph vs. 40 kph. To help address this question, an analysis of constraints was performed via extensive mathematical modeling of a theoretical restraint system. First, math models (correlated with several existing physical tests) were used to predict the occupant responses associated with 336 different theoretical dual-stage driver airbag designs subjected to six specific Regulated and non-Regulated tests.

Urea-selective catalytic reduction (SCR) after-treatment systems are used for reducing oxides of nitrogen (NOx) emissions in medium and heavy duty diesel vehicles. This paper addresses control-oriented modeling, starting from first-principles, of SCR after-treatment systems. Appropriate simplifications are made to yield governing equations of the Urea-SCR. The resulting nonlinear partial differential equations (PDEs) are discretized and linearized to yield a family of linear finite-dimensional state-space models of the SCR at different operating points. It is further shown that this family of models can be reduced to three operating regions. Within each region, parametric dependencies of the system on physical mechanisms are derived. Further model reduction is shown to be possible in each of the three regions resulting in a second-order linear model with sufficient accuracy.

A method is described for predicting the reliability and useful life of an automotive powertrain system using a warranty database or from warranty records. The database requires failure corrections for misdiagnosis from duplicate data, trouble-not-identified records and multiple failure modes. Compensations not included in the database for high-mileage drop-out and warranty repairs less than the deductible amount, are also necessary. As an example, the cumulative hazard function of the Bathtub Hazard Rate distribution is fitted to the converted removal data of a typical automotive powertrain, to determine the product life characteristics. An algorithm written in Basic language is used to obtain the analytical results.

NHTSA is expected to publish a final rule on Interior Head Impact (as an amendment to FMVSS 201) by early 1995. One of the Interior Head Impact Study objectives is to develop a methodology for estimating the minimum head impact space requirements to meet this regulation. The physical parameters affecting the HIC (Head Injury Criterion) are impact velocity, maximum headform stopping distance, peak deceleration, and pulse duration. The equations for estimating the HIC vs. Head Impact Space Requirements are formulated by relating these physical parameters to the Idealized Waveforms of Square Wave, Sine Wave, and Haversine Wave. This methodology has been extended to include the Generic Waveform. Tabulations of Maximum Headform Stopping Distance Requirement vs. Peak Deceleration, Pulse Duration, and HIC for the three Idealized Waveforms at 6.7 m/s (15 mph) impact speed have been generated to provide an estimate of the head impact package space requirement.