Search Results

A 1.8L turbocharged diesel engine valvetrain friction was investigated, and the effectiveness of using a solid film lubricant (SFL) coating in reducing friction was determined throughout the operable speed range. This valvetrain design features direct acting mechanical bucket valve lifters. Camshaft journal bearing surfaces and all camshaft rubbing surfaces except lobe tips were coated. The direct acting bucket shims were etched with a cross hatch pattern to a depth sufficient to sustain a SFL film coating on the shim rubbing surfaces subjected to high surface loads. The SFL coated valvetrain torque was evaluated and compared with uncoated baseline torque. Coating the cam bearing journal surfaces alone with II-25D SFL reduced valvetrain friction losses 8 to 17% for 250 to 2000 rpm cam speed range (i.e. 500 - 4000 rpm engine speed). When bucket tappet and shims were also coated with the SFL, further significant reductions in coated valvetrain friction were observed.

The development, evaluation, and selection of Plasma spray powder material for the coating of aluminum-alloy engine cylinder block bores was conducted to yield a bore system which provides numerous benefits relative to the present cast iron sleeve system. These include: a reduction in ring/bore wear, friction, and in engine oil consumption as well as a benefit in reduced corrosion. A reduction in engine weight, overall costs, and improvements in machining and honing operations are shown. Alternate thermal spray processes are also described in this investigation. Test evaluation leads to the selection of two plasma powder material spray systems. One system emphasizes low cost relative to the present system. The second system provides significant reduction in friction and ring/bore wear through the introduction of solid lubricant in the material composition.

An extremely tough alumina based ceramic coating produced by a modified anodizing process developed at Moscow Aviation Institute has been evaluated for light weight, wear resistant component applications in automotive powertrain. The process details and test results from comparative evaluation of friction and wear properties for cylinder bore application, referenced to cast iron baseline, are presented and discussed.

Application process, and performance in engine dynamometer and high mileage vehicle fleet durability tests of Plasmaspray coated bore aluminum block engines are discussed. Fuel economy, oil consumption, power and wear data for Ford 4.6L-V8 aluminum block engines utilizing very low cost iron/iron oxide base coatings, and stainless steel/BN solid film lubricant Plasmasprayed coatings are presented. Test results from Ford's 100 hour Piston & Gasket Engine Dynamometer Durability Tests, and Fleet Vehicle Durability Tests show ring/bore wear reductions of more than 40% relative to production cast iron bore systems with Oil Economy averaging more than 13,600 km/l (8000 mi/qt).

An investigation describing engine friction reduction benefits attainable via the introduction of Solid Film Lubricants to piston skirts is presented. Ford II-25 thermoset and II-25 waterborne molybdenum disulfide based solid film lubricants were shown through single cylinder motored engine experiments, to produce piston system friction reductions of 12 to 17% at 1500 rpm. Further tests undertaken in fired engine dynamometer studies, on a 1.91 1-4 CVH engine, demonstrated total engine friction reductions of 6% at W.O.T. conditions. The reduced engine friction resulted in lowering BSFC at 850 rpm by 3 to 4%. Tests conducted by Powertrain Operations confirmed durability. II-25 thermoset was selected for production implementation on all new Ford engines starting from model year 1995.