Refine Your Search

Search Results

Viewing 1 to 9 of 9
Technical Paper

CAE Simulation of Engine Oil Pump Tonal Noise: Design Modifications and Countermeasures

2017-03-28
2017-01-1076
In this presentation, two cases of CAE simulations of oil pump-induced tonal noises are presented. The first case involves oil pump-induced whine in an I4engine during coast down. The second case addresses oil pan moan during hot idle and the effect of oil pump pick-up tube positioning inside the oil pan of an I5 engine. The investigations include several design modifications to the pump and the pick-up tube to prevent the tonal noise. Test data are also included to demonstrate the accuracy of the CAE simulation.
Technical Paper

Turbocharger First Order Synchronous Noise and Vibrations: Predictions and Measurements

2017-03-28
2017-01-1051
EcoBoost engines constitute one of the strategies used by Ford Motor Company to deliver engines with improved fuel economy and performance. However, turbochargers exhibit many inherent NVH challenges that need to be addressed in order to deliver refined engines that meet customer’s expectation. One of these challenges is the turbocharger 1st order synchronous noise due to the interaction between the manufacturing tolerances of the rotating components and the dynamic behavior of the rotor. This paper discusses an MBD/FEA/BEM based method to predict the nonlinear dynamic behavior of the rotor semi floating bearing, its impact on the bearing loads and the resulting powerplant noise due to the interaction with the turbocharger imbalance level.
Technical Paper

Development of a Thermoplastic Cam Cover for a 4.0L V6 SOHC Engine

2006-04-03
2006-01-0709
The increasing demands to reduce cost is forcing North American Automotive designers towards finding ways to use the thermoplastic material for the under hood components. The use of this material has often been avoided in this type of applications due to concerns around its long-term strength and temperature performance. In particular, the materials of choice for the engine cam cover are Aluminum, Magnesium and Vinyl Ester (Thermoset) although thermoplastic is widely used in Europe and Asia. This paper examines the potential of a thermoplastic cam cover designed to replace the thermoset cam cover in a 4.0L SOHC V6 engine. Experimental data, presented in this paper, demonstrate that a well-designed thermoplastic cam cover can achieve key functional requirements, such as NVH and sealing, while providing substantial cost saving.
Technical Paper

FEA-Based Simulation of Exhaust Hanger Forces

2018-04-03
2018-01-1288
Exhaust systems can be a source of vibrations that transmit inside the vehicle through the exhaust hangers. These vibrations are caused by engine excitations under acceleration. During the upfront development stage, it is important to predict accurately the forces of the exhaust hangers in order to drive a robust exhaust system design and prevent objectionable noise and vibrations inside the vehicle. This paper describes an FEA-based simulation method to predict the exhaust hanger forces. It demonstrates the effect of temperature on the exhaust dynamic behavior and its importance for an accurate prediction of the exhaust hanger forces.
Technical Paper

Optimal Vanes Spacing for Improved NVH Performance of Variable Displacement Oil Pumps

2017-03-28
2017-01-1062
In modern automotive engines, Variable Displacement Oil Pump (VDOP) is becoming the pump of choice to enable reduction in friction and delivery of stringent fuel economy. However, this pump creates pressure ripples, at the outlet port during oil pump shaft rotation, causing oscillating forces within the system and leading to the generation of tonal noises and vibrations. In order to minimize the level of noise, different porting geometries and vane spacing are used. This paper describes an optimization method intended to identify the best possible spacing of the vanes in the conventional 7-vanes, 9-vanes and 11-vanes oil pumps. The method integrates a Matlab routine with the modeFRONTIER software to create the required design space in order to perform a multi-objective optimization using a genetic algorithm. Results of this optimization method are discussed and a design guideline for the VDOP vane spacing is disclosed.
Technical Paper

MACHINE LEARNING ALGORITHM FOR THE PREDICTION OF IDLE COMBUSTION UNIFORMITY

2019-06-05
2019-01-1551
Idle combustion stability is a key contributor to Engine Idle Shake and can impact the overall perception of vehicle quality. The sub-firing harmonics of the combustion torque are used as a metric to assess idle shake and are, typically, measured at different levels of engine break mean effective pressure (BMEP). Due to the nature of the combustion phenomena at idle, it is clear that predicting the distributions of cycle-to-cycle and cylinder-to-cylinder combustion pressure, required to assess the combustion uniformity, cannot be achieved with the state of the art simulation technology. Inspired by the advancement in the field of machine learning and artificial intelligence and by the availability of a large amount of measured combustion pressure data, this paper explores the performance of various machine learning algorithms in predicting the idle combustion uniformity.
Technical Paper

Optimal Pressure Relief Groove Geometry for Improved NVH Performance of Variable Displacement Oil Pumps

2019-06-05
2019-01-1548
Variable Displacement Oil Pump (VDOP) is becoming the design of choice for engine friction reduction and fuel economy improvement. Unfortunately, this pump creates excessive pressure ripples, at the outlet port during oil pump shaft rotation, causing oscillating forces within the lubrication system and leading to the generation of objectionable tonal noises and vibrations. In order to minimize the level of noise, different vanes spacing and porting geometries are used. This paper presents an optimization method to identify the best geometry of the oil pressure relief groove. The method integrates adaptive meshing, 3D CFD simulation, Matlab routine and Genetic Algorithm based optimization. The genetic algorithm is used to create the required design space in order to perform a multi-objective optimization using a large number of parameterized groove geometries. Results of this optimization method are discussed and a design guideline for the oil pressure relief groove is disclosed.
Technical Paper

Topology Driven Design of Under-Hood Automotive Components for Optimal Weight and NVH Attributes

2019-04-02
2019-01-0834
Weight is a major factor during the development of Automotive Powertrains due to stringent fuel economy requirements. Light weighting constitutes a challenge to the engineering community when trying to deliver quieter powertrains. For this reason, the NVH (Noise Vibration Harshness) CAE engineers are adopting advanced vibro-acoustic simulation methods combined with topology optimization methods to drive the design of the under hood components for Noise Vibration and Harshness. Vibro-acoustic computational methods can be complex and require significant computation effort. Computation of Equivalent Radiated Power (referred to as ERP) is a simplified method to assess maximum dynamic radiation of components for specific excitations in frequency response analysis which in turn affects radiated sound. Topology Optimization is a mathematical technique used to find the best material distribution for structural systems in order to deliver a specific objective under clearly defined constraints.
Technical Paper

An Analytical Methodology for Engine Gear Rattle and Whine Assessment and Noise Simulation

2019-04-02
2019-01-0799
In this paper, a CAE methodology based on a multiphysics approach for engine gear noise evaluation is reviewed. The method comprises the results and outputs from several different analytical domains to perform the noise risk assessment. The assessment includes the source-path analysis of the gear-induced rattling and whining noise. The vibration data from the exterior surface of the engine is extended through acoustic analysis to perform the engine noise simulation and to identify acoustic hot spots contributing to the noise. The study includes simulations under different engine loading conditions with results presented in both time and frequency domains. Various sensitivity analyses involving different gear geometries and micro-geometries are investigated as well. Finally, the simulation results from three different engines are compared vis-a-vis.
X