Refine Your Search

Topic

Author

Search Results

Technical Paper

Forward Collision Warning: Preliminary Requirements for Crash Alert Timing

2001-03-05
2001-01-0462
Forward collision warning (FCW) systems are intended to provide drivers with crash alerts to help them avoid or mitigate rear-end crashes. To facilitate successful deployment of FCW systems, the Ford-GM Crash Avoidance Metrics Partnership (CAMP) developed preliminary minimum functional requirements for FCW systems implemented on light vehicles (passenger cars, light trucks, and vans). This paper summarizes one aspect of the CAMP results: minimum requirements and recommendations for when to present rear-end crash alerts to the driver. These requirements are valid over a set of kinematic conditions that are described, and assume successful tracking and identification of a legitimate crash threat. The results are based on extensive closed-course human factors testing that studied drivers' last-second braking preferences and capabilities. The paper reviews the human factors testing, modeling of results, and the computation of FCW crash alert timing requirements and recommendations.
Technical Paper

Role of the Body Mount on the Passenger Compartment Response of a Frame/Body Structured Vehicle in Frontal Crash

1998-02-23
980861
A comprehensive strategy to investigate the role of the body mounts on the passenger compartment response in a frontal crash event is presented. The activities of the study include quasi-static vehicle crush testing, development of a component-level dynamic body mount test methodology, lumped-mass computer modeling, as well as technical analysis. In addition, a means of investigating the effects the body mounts have on the passenger compartment response during a frontal barrier impact is addressed.
Technical Paper

Comparison of BIOSID and EUROSID-1 Dummies in Full-Vehicle Crash Tests

1994-03-01
940563
As a continuation of the AAMA side impact test procedure evaluation, the Association conducted six full-vehicle crash tests according to the NHTSA FMVSS 214 test procedure, but using a EUROSID-1 dummy for the NHTSA SID. The purpose of these tests was to evaluate the EUROSID-1 dummy and compare its responses to the BIOSID dummies previously tested by AAMA under identical conditions. Repeat tests of mid-size Pontiac vehicles with padded and unpadded door interiors were run. The tests showed that the EUROSID-1 dummy chest deflection and Viscous Criterion responses are not repeatable, especially in the rear seat. In addition, it was found that the EUROSID-1 and BIOSID chest deflection responses were different and, sometimes, are directionally opposite.
Technical Paper

Side Impact Modeling using Quasi-Static Crush Data

1991-02-01
910601
This paper describes the development of a three-dimensional lumped-mass structure and dummy model to study barrier-to-car side impacts. The test procedures utilized to develop model input data are also described. The model results are compared to crash test results from a series of six barrier-to-car crash tests. Sensitivity analysis using the validated model show the necessity to account for dynamic structural rate effects when using quasi-statically measured vehicle crush data.
Technical Paper

Status and Update of MVMA Component Testing

1987-05-01
871116
At the Tenth ESV Conference, MVMA reported on the development of a component side impact test device developed for MVMA by MGA Research Corporation. Since that time, the test device has been modified by MGA to improve its biofidelity. Testing has shown that the modified device better meets the force-time corridors derived by MVMA from cadaver drop test data. The improved test device was used to test twelve 1985 Ford LTD doors at speeds of 25.7 and 37 km/h. The interior door surfaces were trimmed with either thin fiber board or foam padding identical to doors in vehicles tested by MVMA using NHTSA's full-vehicle test procedure. The tests showed that the MVMA device is simple to set up and run, is highly repeatable and easily discriminates between the unpadded and padded doors. A major issue for future research and development is how to select a priori a component test device impact speed which can account for differences in car size and side structure stiffness.
Technical Paper

Considerations for Head-Injury Categorization via NASS Analysis

2017-03-28
2017-01-1430
The present study had three objectives: (1) define a reasonable number of categories to bin head injuries, (2) develop an overarching risk function to estimate head-injury probability based on injury probabilities pertaining to those subordinate categories, and (3) assess the fidelity of both the overarching function and approximations to it. To achieve these objectives, we used real-world data from the National Automotive Sampling System (NASS), pertaining to adult drivers in full-engagement frontal crashes. To provide practical value, we factored the proposed US New Car Assessment Program (US NCAP) and the corresponding Request for Comments from the government. Finally, the NASS data stratifications included three levels of injury (AIS1+, AIS2+, AIS3+), two levels of restraint (properly-belted, unbelted), and two eras based on driver-airbag fitment (Older Vehicles, Newer Vehicles).
Technical Paper

Folded Pelvis-Thorax Side Airbag Modeling with CFD Approach and Implementation in Full Vehicle Crash Analysis

2017-03-28
2017-01-1460
The Pelvis-Thorax Side Air Bag (PTSAB) is a typical restraint countermeasure offered for protection of occupants in the vehicle during side impact tests. Currently, the dynamic performance of PTSAB for occupant injury assessment in side impact is limited to full-vehicle evaluation and sled testing, with limited capability in computer aided engineering (CAE). The widely used CAE method for PTSAB is a flat bag with uniform pressure. The flat PTSAB model with uniform pressure has limitations because of its inability to capture airbag deployment during gap closure which results in reduced accuracy while predicting occupant responses. Hence there is a need to develop CAE capability to enhance the accuracy of prediction of occupant responses to meet performance targets in regulatory and public domain side impact tests. This paper describes a new CAE methodology for assessment of PTSAB in side impact.
Technical Paper

Numerical Investigation of the Impact of Nozzle Endwall Clearance Distribution on Variable Nozzle Turbine Performance

2017-03-28
2017-01-1034
As the variable nozzle turbine(VNT) becomes an important element in engine fuel economy and engine performance, improvement of turbine efficiency over wide operation range is the main focus of research efforts for both academia and industry in the past decades. It is well known that in a VNT, the nozzle endwall clearance has a big impact on the turbine efficiency, especially at small nozzle open positions. However, the clearance at hub and shroud wall sides may contribute differently to the turbine efficiency penalty. When the total height of nozzle clearance is fixed, varying distribution of nozzle endwall clearance at the hub and shroud sides may possibly generate different patterns of clearance leakage flow at nozzle exit that has different interaction with and impact on the main flow when it enters the inducer.
Technical Paper

The Causal Relationship between Wheel Rim Gouging Forces on Roadway Surfaces and Rollover Crashes

2018-04-03
2018-01-0556
There has been a general consensus in the scientific literature that a rim gouging, not scraping, into a roadway surface generates very high forces which can cause a vehicle to overturn in some situations. However, a paper published in 2004 attempts to minimize the forces created during wheel rim gouging and the effect on vehicle rollover. This paper relied largely on heavily filtered lateral acceleration data and discounted additional test runs by the authors and NHTSA that did not support the supposed conclusions. This paper will discuss the effect of rim gouging using accepted scientific methods, including full vehicle testing where vehicle accelerations were measured during actual rim gouging events and static testing of side forces exerted by wheels mounted on a moving test fixture. The data analyzed in this paper clearly shows that forces created by rim gouges on pavement can be thousands of Newtons and can contribute to vehicle rollover.
Technical Paper

Simulation of Side Impact Using the CAL3D Occupant Simulation Model

1979-02-01
791007
By applying some advanced features of the CAL3D occupant simulation model, a single model incorporating the vehicle structure and a simplified occupant was developed for studying the sensitivity of occupant response to parameter changes in perpendicular, vehicle-to-vehicle side impacts, not involving vehicle rotation. The results of the model show qualitative agreement with published experimental results, which indicate that occupant responses are related to the initial clearance of the occupant from the door, the stiffnesses of the front end of the impacting vehicle, and the side structure of the impacted vehicle.
Technical Paper

Initial Assessment of the Next-Generation USA Frontal NCAP: Fidelity of Various Risk Curves for Estimating Field Injury Rates of Belted Drivers

2009-04-20
2009-01-0386
Various frontal impact risk curves were assessed for the next-generation USA New Car Assessment Program (NCAP). Specifically, the “NCAP risk curves” — those chosen by the government for the 2011 model year NCAP — as well as other published risk curves were used to estimate theoretically the injury rates of belted drivers in real-world frontal crashes. Two perspectives were considered: (1) a “point” estimate of NCAP-type events from NCAP fleet tests, and (2) an “aggregate” estimate of 0 ≤ ΔV ≤ 56 km/h crashes from a modeled theoretical vehicle whose NCAP performance approximated the average of the studied fleet. Four body regions were considered: head, neck, chest, and knee-thigh-hip complex (KTH). The curve-based injury rates for each body region were compared with those of real-world frontal crashes involving properly-belted adult drivers in airbag-equipped light passenger vehicles. The assessment yielded mixed results.
Technical Paper

A Study of Crash Energy and Severity in Frontal Vehicle-To-Vehicle Crash Tests

2011-04-12
2011-01-0541
This work presents a study of crash energy and severity in frontal offset Vehicle-To-Vehicle (VTV) crash tests. The crash energy is analyzed based on analytical formulations and empirical data. Also, the crash severity of different VTV tests is analyzed and compared with the corresponding full frontal rigid barrier test data. In this investigation, the Barrier Equivalent Velocity (BEV) concept is used to calculate the initial impact velocity of frontal offset VTV test modes such that the offset VTV tests are equivalent to full frontal impact tests in terms of crash severity. Linear spring-mass model and collinear impact assumptions are used to develop the mathematical formulation. A scale factor is introduced to account for these assumptions and the calculated initial velocity is adjusted by this scale factor. It is demonstrated that the energies due to lateral and rotational velocity components are very small in the analyzed frontal VTV tests.
Technical Paper

Multi-Objective Optimal Design and Robustness Assessment Framework for Vehicle Side Impact Restraint System Design

2011-04-12
2011-01-0107
With the increasing demands of developing vehicles for global markets, different regulations and public domain tests need to be considered simultaneously for side impact. Various side impact countermeasures, such as side airbags, door trim, energy absorbing foams etc., are employed to meet multiple side impact performance requirements. However, it is quite a challenging task to design a balanced side impact restraint system that can meet all side impact requirements for multiple crash modes. This paper presents an integrated multi-objective optimal design and robustness assessment framework for vehicle side impact restraint system design.
Technical Paper

Biomechanical Analysis of Knee Impact in Frontal Collisions through Finite Element Simulations with a Full Human Body Model

2008-06-17
2008-01-1887
This study applies a detailed finite element model of the human body to simulate occupant knee impacts experienced in vehicular frontal crashes. The human body model includes detailed anatomical features of the head, neck, chest, thoracic and lumbar spine, abdomen, and lower and upper extremities. The material properties used in the model for each anatomic part of the human body were obtained from test data reported in the literature. The total human body model used in the current study has been previously validated in frontal and side impacts. Several cadaver knee impact tests representing occupants in a frontal impact condition were simulated using the previously validated human body model. Model impact responses in terms of force-time and acceleration-time histories were compared with test results. In addition, stress distributions of the patella, femur, and pelvis were reported for the simulated test conditions.
Technical Paper

Integration of Active and Passive Safety Technologies - A Method to Study and Estimate Field Capability

2015-11-09
2015-22-0010
The objective of this study is to develop a method that uses a combination of field data analysis, naturalistic driving data analysis, and computational simulations to explore the potential injury reduction capabilities of integrating passive and active safety systems in frontal impact conditions. For the purposes of this study, the active safety system is actually a driver assist (DA) feature that has the potential to reduce delta-V prior to a crash, in frontal or other crash scenarios. A field data analysis was first conducted to estimate the delta-V distribution change based on an assumption of 20% crash avoidance resulting from a pre-crash braking DA feature. Analysis of changes in driver head location during 470 hard braking events in a naturalistic driving study found that drivers’ head positions were mostly in the center position before the braking onset, while the percentage of time drivers leaning forward or backward increased significantly after the braking onset.
Technical Paper

Derivation of a Provisional, Age-dependent, AIS2+ Thoracic Risk Curve for the THOR50 Test Dummy via Integration of NASS Cases, PMHS Tests, and Simulation Data

2015-11-09
2015-22-0006
A provisional, age-dependent thoracic risk equation (or, “risk curve”) was derived to estimate moderate-to-fatal injury potential (AIS2+), pertaining to men with responses gaged by the advanced mid-sized male test dummy (THOR50). The derivation involved two distinct data sources: cases from real-world crashes (e.g., the National Automotive Sampling System, NASS) and cases involving post-mortem human subjects (PMHS). The derivation was therefore more comprehensive, as NASS datasets generally skew towards younger occupants, and PMHS datasets generally skew towards older occupants. However, known deficiencies had to be addressed (e.g., the NASS cases had unknown stimuli, and the PMHS tests required transformation of known stimuli into THOR50 stimuli).
Technical Paper

New Risk Curves for NHTSA’s Brain Injury Criterion (BrIC): Derivations and Assessments

2016-11-07
2016-22-0012
The National Highway Traffic Safety Administration (NHTSA) recently published a Request for Comments regarding a potential upgrade to the US New Car Assessment Program (US NCAP) - a star-rating program pertaining to vehicle crashworthiness. Therein, NHTSA (a) cited two metrics for assessing head risk: Head Injury Criterion (HIC15) and Brain Injury Criterion (BrIC), and (b) proposed to conduct risk assessment via its risk curves for those metrics, but did not prescribe a specific method for applying them. Recent studies, however, have indicated that the NHTSA risk curves for BrIC significantly overstate field-based head injury rates. Therefore, in the present three-part study, a new set of BrIC-based risk curves was derived, an overarching head risk equation involving risk curves for both BrIC and HIC15 was assessed, and some additional candidate-predictor-variable assessments were conducted. Part 1 pertained to the derivation.
Technical Paper

Modeling Energy Absorption and Deformation of Multicorner Columns in Lateral Bending

2006-04-03
2006-01-0123
The frame rail has an impact on the crash performance of body-on-frame (BOF) and uni-body vehicles. Recent developments in materials and forming technology have prompted research into improving the energy absorption and deformation mode of the frame rail design. It is worthwhile from a timing and cost standpoint to predict the behavior of the front rail in a crash situation through finite element techniques. This study focuses on improving the correlation of the frame component Finite Element model to physical test data through sensitivity analysis. The first part of the study concentrated on predicting and improving the performance of the front rail in a frontal crash [1]. However, frame rails in an offset crash or side crash undergo a large amount of bending. This paper discusses appropriate modeling and testing procedures for front rails in a bending situation.
Technical Paper

Biomechanics of 4-Point Seat Belt Systems in Farside Impacts

2006-11-06
2006-22-0012
The biomechanical behavior of a harness style 4-point seat belt system in farside impacts was investigated through dummy and post mortem human subject tests. Specifically, this study was conducted to evaluate the effect of the inboard shoulder belt portion of a 4-point seat belt on the risk of vertebral and soft-tissue neck injuries during simulated farside impacts. Two series of sled tests simulating farside impacts were completed with crash dummies of different sizes, masses and designs to determine the forces and moments on the neck associated with loading of the shoulder belt. The tests were also performed to help determine the appropriate dummy to use in further testing. The BioSID and SID-IIs reasonably simulated the expected kinematics response and appeared to be reasonable dummies to use for further testing. Analysis also showed that dummy injury measures were lower than injury assessment reference values used in development of side impact airbags.
Technical Paper

Derivation and Theoretical Assessment of a Set of Biomechanics-based, AIS2+ Risk Equations for the Knee-Thigh-Hip Complex

2006-11-06
2006-22-0005
A set of risk equations was derived to estimate the probability of sustaining a moderate-to-serious injury to the knee-thigh-hip complex (KTH) in a frontal crash. The study consisted of four parts. First, data pertaining to knee-loaded, whole-body, post-mortem human subjects (PMHS) were collected from the literature, and the attendant response data (e.g., axial compressive load applied to the knee) were normalized to those of a mid-sized male. Second, numerous statistical analyses and mathematical constructs were used to derive the set of risk equations for adults of various ages and genders. Third, field data from the National Automotive Sampling System (NASS) were analyzed for subsequent comparison purposes.
X