Search Results

Moir� method is useful to measure the shape and the whole-field distributions of displacement and strain of structures. There are many kinds of moir� methods such as geometric moir� method, sampling moir� method, Fourier transform moir� method, moir� interferometry, shadow moir� method and moir� topography. Grating method analyzing directly deformation of a grating without any moir� fringe pattern is considered as an extended technique of moire method. Phase analysis of the moire fringe patterns and the grating patterns provides accurate measurements of shapes or displacement and strain distributions. Some applications of these moir� methods and grating methods to dynamic shape and strain distribution measurements of a rotating tire, sub-millimeter displacement measurements from long distance for landslide prediction, real-time shape measurements with micro-meter order accuracy, etc. are shown. Presenter Yoshiharu Morimoto, Moire Institute Inc.

Virtual testing is a method that simulates lab testing using multi-body dynamic analysis software. The main advantages of this approach include that the design can be evaluated before a prototype is available and virtual testing results can be easily validated by subsequent physical testing. The disadvantage is that accurate specimen models are sometimes hard to obtain since nonlinear components such as tires, bushings, dampers, and engine mounts are hard to model. Therefore, virtual testing accuracy varies significantly. The typical virtual rigs include tire and spindle coupled test rigs for full vehicle tests and multi-axis shaker tables for component tests. Hybrid simulation combines physical and virtual components, inputs and constraints to create a composite simulation system. Hybrid simulation enables the hard to model components to be tested in the lab.

LI-ion battery cells used in EVs are subjected to different charge and discharge rates due to the varying and fluctuating demand for power by the user. The different C rates in turn will have variation in internal heat profiles. This paper will provide a prediction of the total heat generated in cells from joule heat and reaction heat. The project has an experimental method to measure joule heat by performing HPPC tests at different C rates and at different cell surface temperatures. To measure reaction heat an experimental method is designed to test cells at different temperatures. Calculation of entropic heat coefficient to be done from open circuit voltage vs temperature graph. MATLAB Simulink model used to predict the temperature at a specific time by providing C rates. Simulation of the thermodynamic behavior of the cell is done on calculated heat generation values. Reaction Heat part cannot be ignored in calculation of total heat generation by cell.

Hybrid vehicle simulation methods combine physical test articles (vehicles, suspensions, etc.) with complementary virtual vehicle components and virtual road and driver inputs to simulate the actual vehicle operating environment. Using appropriate components, hybrid simulation offers the possibility to develop more accurate physical tests earlier, and at lower cost, than possible with conventional test methods. MTS Systems has developed Hybrid System Response Convergence (HSRC), a hybrid simulation method that can utilize existing durability test systems and detailed non-real-time virtual component models to create an accurate full-vehicle simulation test without requiring road load data acquisition. MTS Systems and Audi AG have recently completed a joint evaluation project for the HSRC hybrid simulation method using an MTS 329 road simulator at the Audi facility in Ingolstadt, Germany.

When an automobile negotiates a flooded region, water is splashed due to the rotational motion of the wheels. This water enters the air intake system of the turbocharged intercooled engine along with air and can pass through the turbocharger, intercooler and enter the engine. As water is an incompressible fluid, the piston cannot compress water inside the cylinder which leads to connecting rod bending and severe engine damage. This paper explains how the same has been resolved using CFD methodology and proposes the re-designed model of mud cover as a solution to this problem. The entire process has been streamlined and major time and cost reduction achieved by using simulation for optimization. The simulated results have been validated by extensive trials for correlation and outdoor tests for durability. Same analysis technique is used as a template to modify the air intake system.

To meet the latest trends in Internal Combustion engines regarding efficiency, emissions and durability, an integrated approach to engine development is required. This paper describes about a Robust, Reliable and an integrated approach used in design and development of an engine for high power density which can be adopted for both Off-highway application as well as Genset application. The engine is developed to meet US - EPA Tier-III Emission Norms and MoEF (Genset Emission Norms for India formulated by Ministry of Environment and Forest) emission norms respectively. This paper discusses various technologies applied in developing this engine to achieve high power density, low exhaust emissions, and low noise and vibrations. This 4 valve per cylinder engine is created largely within a digital environment using the latest computer aided design (CAD) and computer aided engineering (CAE) techniques and simulation tools.

Product development processes generate large quantities of experimental and analytical data. The data evaluation process is usually quite lengthy since the data needs to be extracted from a large number of individual output files and arranged in suitable formats before they can be compared. When the data quantity grows extremely large, manual extraction cannot be done in a limited timeframe. This paper describes a set of tools developed by MTS engineers to automatically extract the desired information from a large number of files and perform data post-processing. The tools greatly improved both speed and accuracy of the evaluation process during the development of a sound quality-based end-of-line inspection system for seat tracks [1]. It allowed engineers to quickly gather a comprehensive understanding of the relative importance of individual design parameters and of their correlation to the subjective perception of the sound quality of the seat track.

Rapid development of advanced multi-axial load transducer systems now requires the use of computer-based analytical tools to assist the development engineer optimize the design to meet often-conflicting design targets. This paper presents a case study based on the development of a wheel force load transducer to meet a challenging set of performance goals including accuracy, repeatability, durability and insensitivity to the external environment. The paper also highlights the limitations of some of the current analytical tools when used for load transducer design, and how these limitations can be overcome by cost-effective combinations of analytical performance prediction and physical test confirmation.

A numerical method for generating a blockloading profile from a rainflow histogram is described. Unlike previous techniques, this method produces a blockloading profile which, when rainflow-counted, yields a rainflow histogram identical to the original. When implemented with modern data acquisition and signal-processing techniques, this generation method provides a means of developing blockloading test profiles which are correlated with actual service data. This key benefit elevates existing simple testing systems as useful and productive tools despite the emrgence of more complex testing systems.

ADAMS, SIMULINK, and ADAMS-SIMULINK co-simulation models of component test systems, Multi-Axis-Simulation-Table (MAST) systems, and spindle-coupled vehicle testing system (MTS 329) were created. In the ADAMS models, the mechanical parts, joints, and bushings were modeled. Hydraulic and control elements were absent. The SIMULINK models modeled control and hydraulic elements including actuator dynamics, servo valve dynamics, closed loop control, three-variable control, matrix control, and coordinate transformation. However, the specimen had to be simplified due to the limitation of SIMULINK software. The ADAMS-SIMULINK co-simulation models considered hydraulic and control components in the SIMULINK portion and mechanical components in ADAMS portion. The interaction between the ADAMS and SIMULINK portions was achieved using ADAMS/Control.

Environmental pollution is of great concern; hence the emission norms for the diesel engines are made more stringent. The purpose of this work is to develop a process to optimize the FIS parameters and select a most suitable FIS by simulation to meet the target emissions. During the combustion optimization exercise of diesel engine, different hardware combinations like injector, HPP etc are matched through testing to achieve the required performance and emissions. The process requires the real testing of the engine on engine dynamometer with various hardware combinations, which is expensive and time consuming. A simulation model of diesel FIS is constructed using ‘AVL Hydsim’. The model is validated by comparing the predicted and the experimental results. The validated model is used for further work. Critical parameters were listed based on the sensitivity analysis on the base model.

Suspension development is one of the key steps in a complete vehicle development program. Computer simulation and analysis tools such as Multi Body Dynamics (MBD) simulation are used to refine initial concept and suspension parameters. Later on when a physical prototype is available the suspension system can be experimentally optimized at vehicle level. In this paper a new methodology is proposed which integrates virtual and experimental tools so that design, development and validation of the suspension system is carried out in the early phase of the vehicle development cycle with actual suspension components and without the need of a vehicle prototype. With this new approach, the design of any critical suspension components such as dampers can be optimized at the vehicle level. The new approach consists of combining the actual physical components on loading rig in closed loop with vehicle dynamic model running in real time.

Anthropometric data of a country is vital database for automotive design and other design applications. It is also an important parameter in population studies. Most developed countries have invested resources over the years to develop such a database and this information is accessed by many OEMs and major Design Houses. However, an updated and comprehensive Anthropometry of Indian Population is largely unknown. In the past, a few institutions have done projects to bring out a picture of the Indian Anthropometry. However, keeping in view the rapid industrialization and increase of India-specific designs which require an access to latest Anthropometric database, the project “SIZE INDIA” has been initiated. For the first time in India, a state of the art 3D Whole body scanner technology has been used and thereby large volume of data has been generated in a very short span of time.

Seat system resonant frequencies play an important role in seat design and ride dynamics. So NVH performance of the seats should be assessed from the viewpoint of tactile, acoustic and visual sense. Tactile response is the response of sub-systems, which is induced when the human body contacts steering wheel, footrest or seats. Acoustic response is the behavior of the seat system at the cavity resonance frequencies and visual sense is what we perceive under actual operating conditions. The objective of the present work is to conduct and correlate experimental modal test with FE modal test to identify tactile vibrations. Then the identified main seat modes will be used to set the mode map (seat target) at the stage of full vehicle level. This work will present a practical approach in understanding varied methods and techniques for determining resonant characteristics and for subsequent refinement of FE model.

The Partially Pre-mixed Charge Compression Ignition (PCCI) combustion was experimentally and computationally investigated with retarded injection timing for mixture homogeneity and for lower emissions. PCCI combustion concept was experimentally evaluated with retarded injection timing close to TDC with high EGR levels up to 50%. The CFD analysis has carried out for mixture homogeneity with different injection pressures and timings. A 4-cylinder TCIC engine having 2valves/cylinder were selected for experiments and speed vs. torque mapped for LCV applications. A Visio technique has been used to study the in-cylinder combustion. After fine tuning of injection pressure, injection timing and EGR ratio over entire range of engine speeds and loads, a 13-mode ESC test cycle has been carried out for EURO-IV and EURO-V emissions. Experimental results shows that it is possible to meet EURO-IV emissions with combined PCCI-DI combustion concept with economical aftertreatment solution.

The acoustical performance of a vehicle dash panel system is rated by the noise reduction, which is calculated from the sound transmission and absorption characteristics. A typical dash insulator consists of a steel panel (vehicle body panel), a porous decoupler and heavy layer in the form of sandwich construction. The use of dash panel is to block engine noise from entering into the interior cabin. In the present study the transmission loss of dash panel has been evaluated in reverberation chambers and the sound absorption of dash panel has been determined in impedance tube. This paper deals with improving over all sound transmission loss and shifting of the double wall resonance well below the engine firing frequencies by changing the decoupler materials such as felt and foams of different density and thickness and heavy layer mass per unit area.

Recent trends towards design of High Performance Diesel engines creating more challenges in the area of design, durability and NVH aspects of components and systems. In particular, Valvetrain system of High Speed application engines is one of the most critical and complicated dynamic system in terms of precise control of events, max. Lift, control over accelerations and vibration related issues. This can be tackled by designing the cam profile for better valve train dynamics. High frequency components and/or excessive jerks in a cam profile are important sources of cam-follower vibrations. There are various techniques of designing cam profile to achieve controlled valve train dynamic behavior at high speed operations. Present paper discuss the impact of various cam profile options designed using Polydyne, N-Harmonic and B-Spline methodologies on a field problem of cam wear for high speed engine application.

Three dimensional finite element analysis of mufflers has been carried out using ANSYS general purpose program. Analysis of simple expansion chamber muffler, extended tube muffler, tapered chamber muffler, offset chamber muffler and flow reversing chamber muffler has been carried out to predict the transmission loss. This three dimensional FEA technique has proved to be successful for the analysis of geometrically complicated mufflers where one dimensional theories can not be used. Parametric analysis of a simple expansion chamber muffler has been carried out to study the effect of expansion ratio, expansion chamber length, number of partitions within a chamber and unequal partitions. Analysis of acoustic cavity of a simple expansion chamber muffler has also been carried out to predict the natural frequencies and acoustic mode shapes.

A test engineer faces a series of considerations (decisions) when designing a test program to conduct service history simulation testing of full scale vehicles (structures) in the laboratory. This paper proposes a logical decision path, with pertinent discussion of tradeoffs, which is intended to serve as a design guide in this process. A good deal of the authors’ subjective opinion is included. The paper begins by presenting a model of how a test facility should interface to the total engineering process. This is important in establishing a proper division of responsibility for the validity and usefulness of test results. This is followed by a specific discussion of service history simulation testing for durability evaluation.

The purpose of this paper is to present the past and present concepts of mechanical test optimization, which means the adjustment of a test machine command signal to achieve desired amplitude and mean levels. In particular, the methods of null pacing, dynamic frequency control, classical amplitude control, and maximum velocity limiting / control are discussed along with their respective application areas, advantages and disadvantages. Also, the factors of data verification and over-complication of the test are noted.