Search Results

The purpose of this AIR is to compile in one definitive source, commonly accepted calibration, acceptance criteria and procedures for simulation of Supercooled Large Droplet (SLD) conditions within icing wind tunnels. Facilities that meet the criteria for either some or all of the recognized conditions will have known SLD icing simulation capability.

This document is intended to serve two purposes: (1) provide a list of topics for potential customers to ask of the facility to aid their selection decision-making, and (2) provide a list of icing wind tunnel and engine test stand facilities that simulate flight through icing or ice crystal clouds.

This document provides information on current practices for testing air data probes to 14 CFR Part 33 Appendix D ice crystal and mixed phase icing conditions. This AIR is primarily concerned with techniques for measuring the flow and icing environment in the test facility. While the focus of this report is the testing of air data probes, techniques described may be applicable to Appendix D tests of other aerospace equipment as well.

A review of icing materials that would be educational to a designer of a UAV ice protection system is provided. Additionally, the differences between unmanned and manned ice protection systems are explored along with a discussion on how these differences can be addressed.

The new standard will establish minimum performance requirements for angle of attack (AOA) and angle of sideslip (AOS) sensors in ice and rain conditions. The new standard will cover the various sensor technologies used to measure these flow angles and is limited to the sensor itself as defined from the portion of the sensor that is directly exposed to the ice and rain environment to the means by which its output is relayed to the relevant aircraft systems. The user of this standard must evaluate the aircraft level installation requirements for the probe to ensure adequate coverage for the application. It may be necessary to modify the test conditions in order to meet the applicable installation requirements.

Develop an Aerospace Recommended Practice that describes means of certification compliance for approval of passive rotorcraft engine/APU induction system ice protection (inadvertent and full icing).

This specification covers the general requirements for the design, installation, and performance of thermal anti-icing equipment for the wings and empennage surfaces in aircraft.

This specification covers one type of spray equipment for the elimination of ice formation on aircraft windows.

This specification covers one type of spray equipment for the elimination of ice formation on aircraft windows.

A review of droplet sizing instruments used for icing research is presented. These instruments include the Forward Scattering Spectrometer Probe, the Optical Array Probe, the Phase Doppler Particle Analyzer, the Malvern Particle Size Analyzer, the oil slide technique, and the rotating multicylinder. The report focuses on the theory of operation of these instruments and practical considerations when using them in icing facilities.

This SAE Aerospace Information Report (AIR) presents and discusses the results of tests of three models in six icing wind tunnels in North America and Europe. This testing activity was initiated by the Facility Standardization Panel of the SAE AC-9C Aircraft Icing Technology Subcommittee. The objective of the testing activity was to establish a benchmark that compared ice shapes produced by icing wind tunnels available for use by the aviation industry and to use that benchmark as a basis for dialogue between facility owners to improve the state-of-the-art of icing wind tunnel technology.

This SAE Aerospace Information Report (AIR) presents and discusses the results of tests of three models in six icing wind tunnels in North America and Europe. This testing activity was initiated by the Facility Standardization Panel of the SAE AC-9C Aircraft Icing Technology Subcommittee. The objective of the testing activity was to establish a benchmark that compared ice shapes produced by icing wind tunnels available for use by the aviation industry and to use that benchmark as a basis for dialogue between facility owners to improve the state-of-the-art of icing wind tunnel technology.

This SAE Aerospace Information Report (AIR) provides definitions for terms commonly used in aircraft inflight icing system design and analysis, research, and operations. Some general thermodynamic terms are included that are frequently used in icing analysis, but this document is not meant to be an inclusive list of such terms.

This SAE Aerospace Recommended Practice (ARP) provides recommended definitions for terms commonly used in aircraft inflight icing system design and analysis, research, and operations. Some general thermodynamic terms are included that are frequently used in icing analysis, but this document is not meant to be an inclusive list of such terms.

This SAE Aerospace Recommended Practice (ARP) provides recommended definitions for terms commonly used in aircraft inflight icing system design and analysis, research, and operations. Some general thermodynamic terms are included that are frequently used in icing analysis, but this document is not meant to be an inclusive list of such terms.

This SAE Aerospace Information Report (AIR) contains information on most of the major icing simulation ground facilities. An effort was made to obtain data from as many facilities as possible over a two year time period. The data in this document represents the state of the facilities in calendar year 1996. Facilities are constantly changing and upgrading and, therefore, some facility specifications may change during the life of this report. Of the 27 facilities described in this report, the primary use is split with approximately half for engine testing and half for wind tunnel testing. The facilities are limited to ground facilities and, therefore, icing tankers have not been included.

This SAE Aerospace Information Report (AIR) contains information on most of the major icing simulation ground facilities. An effort was made to obtain data from as many facilities as possible over a two year time period. The data in this document represents the state of the facilities in calendar year 1996. Facilities are constantly changing and upgrading and, therefore, some facility specifications may change during the life of this report. Of the 27 facilities described in this report, the primary use is split with approximately half for engine testing and half for wind tunnel testing. The facilities are limited to ground facilities and, therefore, icing tankers have not been included.

This document provides information, guidelines, and practices for the application, use, and administration of two-dimensional and three-dimensional droplet impingement and ice accretion computer codes. The codes provide computational simulations of inflight icing that predict droplet trajectory, water loading, and ice accretion on aircraft components. These ice accretion characteristics are used during the aircraft design and certification process.

This document provides information regarding ice detector technology and design. The SAE document AS5498 provides detailed information regarding the requirements, specifications, qualification, and certification of icing detection systems. This document is not meant to replace AS5498, but to enhance it by considering unique aspects of sensing technology and, in particular, those that may not be certificated at the time of this revision. To that end, an effort has been made not to duplicate information contained in AS5498. Icing rate information is included where applicable. The primary application is associated with ice forming on the leading edges of airfoils and inlets while the aircraft is in flight. Information related to detection of ice over cold fuel tanks and icing at low-velocity operation is included. The material is primarily applicable to fixed-wing aircraft. Unique requirements for engine inlets and rotorcraft are also provided.

This Aerospace Information Report (AIR) identifies and summarizes the various factors that should be considered during design, development, certification, or testing of helicopter rotor blade ice protection. Although various concepts of ice protection are mentioned in this report, the text is limited generally to those factors associated with design and substantiation of cyclic electrothermal ice protection systems as applicable to the protection of helicopter rotor blades. Other systems are described briefly in Appendix A. Applications consider main rotor blades, conventional tail rotor blades, and other types of antitorque devices. The information contained in this report is also limited to the identification of factors that should be considered and why the factor is important. Specific design, analysis and test methodologies are not included. For additional information refer to the references in Section 7.