Search Results

Standard

Bearings, Fiber Reinforced Plastic, Sleeve, Plain and Flanged, Self-Lubricating; General Specification For

2004-11-15

HISTORICAL

AS85560

This specification defines the requirements for fiber reinforced plastic (FRP) composition plain and flanged sleeve bearings that are self-lubricating and which are compatible with graphite-epoxy composites.

Standard

Bearings, Fiber Reinforced Plastic, Sleeve, Plain and Flanged, Self-Lubricating; General Specification For

2013-01-11

HISTORICAL

AS85560B

This specification defines the requirements for fiber reinforced plastic (FRP) composite plain and flanged sleeve bearings that are self-lubricating and which are compatible with graphite-epoxy composites.

Standard

Bearings, Fiber Reinforced Plastic, Sleeve, Plain and Flanged, Self-Lubricating; General Specification For

2007-10-10

HISTORICAL

AS85560A

This specification defines the requirements for fiber reinforced plastic (FRP) composite plain and flanged sleeve bearings that are self-lubricating and which are compatible with graphite-epoxy composites.

Standard

Bearings, Fiber Reinforced Plastic, Sleeve, Plain and Flanged, Self-Lubricating; General Specification for

2019-05-23

CURRENT

AS85560C

This standard defines the requirements for fiber reinforced plastic (FRP) composite plain and flanged sleeve bearings that are self-lubricating and which are compatible with graphite-epoxy composites.

Standard

Plain Bearing Wear Measurement

2016-12-12

CURRENT

ARP5448/7A

This standard details two methods of inspecting PTFE lined spherical or journal bearing wear outside the test apparatus. The methods described herein are applicable only to bearings which were unidirectionally loaded and the area of sliding wear is known and held constant throughout the dynamic test. The two methods described are: a Destructive Inspection - Cut and measure (not applicable to molded liners) b Nondestructive Inspection - Radial play (gauge) measurement

Standard

Plain Bearing Bond Integrity - Peelable Woven Fabric PTFE Liners

2018-08-13

CURRENT

ARP5448/4

This test method outlines a recommended procedure for performing bond integrity tests of bonded peelable woven fabric reinforced polytetrafluoroethylene (PTFE) liners, hereafter referred to within this document as "PTFE liner" or "liner". The data from these tests shall be used to determine if the product meets the "bond integrity" requirements of the applicable specifications.

Standard

Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification For (-65 to +325 °F)

2011-06-20

CURRENT

AS81935C

This specification covers plain rod end bearings, corrosion resistant steel (CRES) or alloy steel, which are self-aligning and self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner between the ball and race for use in the temperature range -65 to +325 °F (-54 to +163 °C).

Standard

Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification For

1997-11-01

HISTORICAL

AS81935

This specification covers plain rod end bearings which are self-aligning and self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner between the ball and outer ring for use in the temperature range -65°F to +325°F.

Standard

Bearings, Plain and PTFE Lined, Self - Aligning

2014-03-25

HISTORICAL

AS8942

This SAE Aerospace Standard (AS) establishes the requirements for self-aligning, self-lubricating plain spherical bearings incorporating polytetrafluoroethylene (PTFE) in a liner between the ball and the outer race for use in a temperature range of -65 to +250 °F (-54 to +121 °C).

Standard

Bearings, Plain and PTFE Lined, Self-Aligning

2022-02-16

CURRENT

AS8942A

This SAE Aerospace Standard (AS) establishes the requirements for self-aligning, self-lubricating plain spherical bearings incorporating polytetrafluoroethylene (PTFE) in a liner between the ball and the outer race for use in a temperature range of -65 to +250 °F (-54 to +121 °C).

Standard

Bearings, Sleeve, Plain and Flanged, Self – Lubricating -65 to +250 °F

2010-08-13

CURRENT

AS8943

This standard covers plain and flanged sleeve bearings which are self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner in the bore for use in a temperature range of -65 to +250 °F (-54 to +121 °C).

Standard

Bearings, Sleeve, Plain and Flanged, Self-Lubricating

2005-02-02

HISTORICAL

AS81934A

This standard covers plain and flanged sleeve bearings which are self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner in the bore for use in the temperature range of -65 to +325 °F (-54 to +163 °C).

Standard

Bearings, Sleeve, Plain and Flanged, Self-Lubricating, General Specification For

1998-04-01

HISTORICAL

AS81934

This specification covers plain and flanged sleeve bearings which are self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner in the bore for use in a temperature range of -65° to +325°F.

Standard

Bearings, Sleeve, Plain and Flanged, Self-Lubricating

2019-09-16

CURRENT

AS81934C

This standard covers plain and flanged sleeve bearings which are self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner in the bore for use in the temperature range of -65 to +325 °F.

Standard

Bearings, Sleeve, Plain and Flanged, Self-Lubricating

2016-05-06

HISTORICAL

AS81934B

This standard covers plain and flanged sleeve bearings which are self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner in the bore for use in the temperature range of -65 to +325 °F.

Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation

2018-05-21

WIP

AS81820E

This SAE Aerospace Standard (AS) covers plain spherical bearings which are self-aligning and self-lubricating by utilizing polytetrafluoroethylene (PTFE) in a fabric composite or molded material that is bonded to the inner diameter surface of the race and when specified, to the bore diameter surface of the ball. These bearings are for use in the temperature range -65 to +325 °F (-54 to +163 °C).

Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation

2004-12-29

HISTORICAL

AS81820B

This standard covers plain spherical bearings which are self-aligning and self-lubricating by utilizing polytetrafluoroethylene (PTFE in a fabric composite or molded material that is bonded to the inner diameter surface of the race and when specified, to the bore diameter surface of the ball. These bearings are for use in the temperature range -65 to +325 °F (-54 to +163 °C).

Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation

2003-07-25

HISTORICAL

AS81820A

This standard covers plain spherical bearings which are self-aligning and self-lubricating by utilizing polytetrafluoroethylene (PTFE in a fabric composite or molded material that is bonded to the inner diameter surface of the race and when specified, to the bore diameter surface of the ball. These bearings are for use in the temperature range -65 to +325 °F (-54 to +163 °C).

Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation

2008-03-25

HISTORICAL

AS81820C

This SAE Aerospace Standard (AS) covers plain spherical bearings which are self-aligning and self-lubricating by utilizing polytetrafluoroethylene (PTFE in a fabric composite or molded material that is bonded to the inner diameter surface of the race and when specified, to the bore diameter surface of the ball. These bearings are for use in the temperature range -65 to +325 °F (-54 to +163 °C).

Standard

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation

2014-07-22

CURRENT

AS81820D

This SAE Aerospace Standard (AS) covers plain spherical bearings which are self-aligning and self-lubricating by utilizing polytetrafluoroethylene (PTFE) in a fabric composite or molded material that is bonded to the inner diameter surface of the race and when specified, to the bore diameter surface of the ball. These bearings are for use in the temperature range -65 to +325 °F (-54 to +163 °C).