Standard
Fittings, Cargo Tiedown, Aircraft
2006-04-27
HISTORICAL
AS7092A
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
Search Results
Standard
Fittings, Cargo Tiedown, Aircraft
2012-10-15
CURRENT
AS7092B
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
Standard
Fittings, Cargo Tiedown, Aircraft
1999-07-01
HISTORICAL
AS7092
This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.
Standard
Fittings and Cargo Rings, Tie-Down, Aircraft Floor
2012-12-03
CURRENT
AS8905A
This specification establishes requirements for two types of aircraft floor fittings for tiedown of cargo and seats, and two types of cargo tiedown rings.
Standard
Fittings and Cargo Rings, Tie-Down, Aircraft Floor
2006-07-25
HISTORICAL
AS8905
This specification establishes requirements for two types of aircraft floor fittings for tiedown of cargo and seats, and two types of cargo tiedown rings.
Standard
Tie Downs, Cargo, Aircraft
2000-11-01
HISTORICAL
AS25959
This specification covers four types of aircraft cargo tie downs.
Standard
Tie Down, Cargo, Aircraft, CGU-1/B
2000-11-01
HISTORICAL
AS27260
This specification covers one type of 5,000-pound capacity aircraft cargo tie down. The tie down is designated CGU-1/B and is furnished in a minimum length of 240 inches.
Standard
Net, Cargo Tiedown, Pallets, HCU-7/E, HCU-15/C, HCU-11/C, and HCU-16/C
2000-11-01
HISTORICAL
AS27444
This specification covers pallet cargo tiedown nets, designated HCU-7/E, HCU-15/C, HCU-11/C and HCU-16/C.
Standard
Tie Down, Cargo, Aircraft, Nylon Web Net
2000-11-01
HISTORICAL
AS26780
This specification covers two types of aircraft cargo tie downs, each having a capacity of 10,000 pounds.
Standard
AS36100 Background and Development Record
2018-10-18
CURRENT
AIR36108
This Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices — Performance Requirements and Test Parameters, published 2005-02, and its revision A published 2006-04, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for — [ Revision 10, 1990, referenced in TSO C90(c) ].
Standard
GROUND EQUIPMENT REQUIREMENTS FOR COMPATIBILITY WITH AIRCRAFT UNIT LOAD DEVICES
1984-10-01
HISTORICAL
ARP1334A
Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria.
Standard
GROUND EQUIPMENT REQUIREMENTS FOR COMPATIBILITY WITH AIRCRAFT UNIT LOAD DEVICES
1973-11-01
HISTORICAL
ARP1334
Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. a) These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria. b) These devices usually form an integral part of the aircraft and as such are subject to regulatory agencies' requirements to assure structural integrity.
Standard
Ground Equipment Requirements for Compatibility with Aircraft Unit Load Devices
2011-09-07
CURRENT
ARP1334C
This SAE Aerospace Recommended Practice (ARP) specifies requirements for those portions of the aircraft Unit Load Device ground and terminal handling equipment that will have a direct bearing on the life of the ULD for the purpose of preventing undue wear on the ULD. Past experience has shown that in-service defects in regard to the above equipment cause high ULD cost. Greater control of maintenance is required.
Standard
Ground Equipment Requirements for Compatibility With Aircraft Unit Load Devices
2004-07-02
HISTORICAL
ARP1334B
This SAE Aerospace Recommended Practice (ARP) specifies requirements for those portions of the aircraft Unit Load Device ground and terminal handling equipment that will have a direct bearing on the life of the ULD for the purpose of preventing undue wear on the ULD. Past experience has shown that in-service defects in regard to the above equipment cause high ULD cost. Greater control of maintenance is required.
Standard
INSULATED AIR CARGO CONTAINER
1992-12-01
HISTORICAL
ARP1523
Perishable cargoes, e.g., dairy produce, fruit, vegetables, flowers, frozen foods, meat, fish, etc., require maintenance of specific temperature ranges during air related door-to-door transportation.
Standard
INSULATED AIR CARGO CONTAINER
1995-07-01
HISTORICAL
ARP1523A
The purpose of this document is to establish minimum operational requirements that will ensure that perishable cargoes in insulated standard airborne containers can be kept in prime condition during the ground handling and air transportation cycle within a maximum time span of 48 h.
Standard
AS36100 Background and Development Record
2006-02-28
HISTORICAL
AIR36107
This SAE Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices - Performance Requirements and Test Parameters, published 2005-02, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for - [Revision 10, 1990, referenced in TSO C90c].
Standard
AS36100 Background and Development
2011-11-23
CURRENT
AIR36107A
This SAE Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices - Performance Requirements and Test Parameters, published 2005-02, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for - [Revision 10, 1990, referenced in TSO C90c].
Standard
GENERAL REQUIREMENTS FOR NON-CERTIFIED LD-2, LD-4 & LD-8 CARGO/BAGGAGE CONTAINERS
1985-03-15
HISTORICAL
AS1677
This AS covers the requirements for three sizes of compartment restrained lower deck containers (Unit Load Devices) for the 767 airplane and which do not require airworthiness certification.
Standard
GENERAL REQUIREMENTS FOR NON-CERTIFIED LD-2, LD-4 & LD-8 CARGO/BAGGAGE CONTAINERS
1988-11-01
HISTORICAL
AS1677A
This AS covers the requirements for three sizes of compartment restrained lower deck containers (Unit Load Devices) for the 767 airplane and which do not require airworthiness certification. NOTE: IATA Specificaton 50/0, General Technical Requirements and Serviceability limits, should also be taken into account when designing and making equipment according to this Specification as certain provisions contained therein will also be applicable.
