Refine Your Search

Date

Date

Topic

Topic

Biofuels Trucks Gasoline Exhaust emissions AGE-2 Air Cargo Safety

Search Results

Viewing 1 to 20 of 88
123Next >Last >>
Sort by relevance
Standard

Air Cargo Equipment Tracking Device - Performance and Test Requirements
2018-10-16
WIP
AS7353
Develop an AS for the minimum performance requirements for tracking devices that are utilized to track the location and other environmental conditions of a piece of equipment that will be transported on-board an aircraft, .i.e ULD, TCC, FRC. The AS will define test requirements or regulation that a device will need to meet to demonstrate no impact to its use on-board an aircraft operation and its crew. The goal would be to request a TSO be developed based on this new standard.
Standard

Air Mode General Purposes Containers
2014-03-25
CURRENT
AS4041B
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m × 2.44 m (8 ft × 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
Standard

AIR MODE GENERAL PURPOSE CONTAINERS
2008-06-22
HISTORICAL
AS4041A
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m X 2.44 m (8 ft X 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
Standard

Tie Down, Cargo, Aircraft, CGU-1/B
2000-11-01
HISTORICAL
AS27260
This specification covers one type of 5,000-pound capacity aircraft cargo tie down. The tie down is designated CGU-1/B and is furnished in a minimum length of 240 inches.
Standard

Fire Containment Cover - Operation and Use
2020-04-23
CURRENT
ARP6905
This SAE Aerospace Recommended Practice (ARP) provides guidelines for the effective operation and use of fire containment covers (FCCs). Technical Standard Orders (TSOs) C203 and C90e (and later revisions) incorporate AS6453, and provide the Minimum Performance Standards (MPS) for an FCC design. The net and pallet used with the FCC must be approved using the updated net and flammability requirements in TSO C90e and later revisions. However, fire containment performance also requires this equipment is properly used. Fire safety is compromised when FCCs are used in an inadequate manner.
Standard

AS36100 Background and Development Record
2018-10-18
CURRENT
AIR36108
This Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices — Performance Requirements and Test Parameters, published 2005-02, and its revision A published 2006-04, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for — [ Revision 10, 1990, referenced in TSO C90(c) ].
Standard

Air Cargo Pallets - Utilization Guidelines
2019-04-01
CURRENT
ARP5486
Air cargo pallets and their cargo restraint nets constitute aircraft Unit Load Devices, defined by industry standards and airworthiness certified based on Technical Standard Order (TSO) C90c in accordance with the requirements of NAS 3610. This guarantees their design to be intrinsically safe for flight on board compatible aircraft types. However, actual flight safety also requires these certified pieces of equipment to be properly used: numerous occurrences have demonstrated a certified ULD can nevertheless jeopardize flight safety if loaded or restrained in an inadequate manner.
Standard

GROUND EQUIPMENT REQUIREMENTS FOR COMPATIBILITY WITH AIRCRAFT UNIT LOAD DEVICES
1984-10-01
HISTORICAL
ARP1334A
Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria.
Standard

GROUND EQUIPMENT REQUIREMENTS FOR COMPATIBILITY WITH AIRCRAFT UNIT LOAD DEVICES
1973-11-01
HISTORICAL
ARP1334
Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. a) These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria. b) These devices usually form an integral part of the aircraft and as such are subject to regulatory agencies' requirements to assure structural integrity.
Standard

AS36100 Background and Development Record
2006-02-28
HISTORICAL
AIR36107
This SAE Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices - Performance Requirements and Test Parameters, published 2005-02, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for - [Revision 10, 1990, referenced in TSO C90c].
Standard

Air Cargo Unit Load Devices - Use of Airworthiness Reference Documents
2018-10-18
CURRENT
AIR36106A
This SAE Aerospace Information Report (AIR) provides instructions for intended proper use of Aerospace Standard AS36100A, published 2006-04 [TSO pending], as the technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded on board civil transport aircraft. For consistency and cross-checking purposes, it also includes instructions for proper use of previous NAS 3610 [Revision 10, 1990, referenced in TSO C90c], as commonly understood by the industry.
Standard

AS36100 Background and Development
2011-11-23
CURRENT
AIR36107A
This SAE Aerospace Information Report (AIR) provides a record of the development by SAE AGE-2A Air Cargo Sub-Committee of Aerospace Standard AS36100, Air Cargo Unit Load Devices - Performance Requirements and Test Parameters, published 2005-02, intended as a technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded with either baggage or freight on board civil transport aircraft, and to partly supersede previously used NAS 3610, Cargo unit load devices - Specification for - [Revision 10, 1990, referenced in TSO C90c].
Standard

Air Cargo Unit Load Devices - Use of Airworthiness Reference Documents
2006-03-21
HISTORICAL
AIR36106
This Aerospace Information Report (AIR) provides instructions for intended proper use of Aerospace Standard AS36100 published 2005-02, as the technical reference for airworthiness approval of air cargo unit load devices (pallets, nets and containers) to be loaded on board civil transport aircraft. For consistency and cross-checking purposes, it also includes instructions for proper use of previous NAS 3610 [Revision 10, 1990, referenced in TSO C90c], as commonly understood by the industry.
Standard

General Requirements for Noncertified Cargo/Baggage Containers
2018-10-18
CURRENT
AS1677D
This SAE Aerospace Standard (AS) covers the design, fabrication, performance and operational testing requirements for lower deck containers for use in main line aircraft which do not require airworthiness certification when loaded under the conditions of compartment restraint and in accordance with the aircraft's Weight and Balance Manual and/or, where applicable according to the aircraft type's approved Weight and Balance Manual, AS36100A or NAS 3610 equivalent base plate restraint for these containers. Most sizes of containers covered by this document (base sizes K, L, P, and Q) cannot physically be loaded and latched on aircraft main deck cargo systems. Base size A and M containers can, but are not allowed on aircraft main decks, which do not accept non-certified units. Accordingly, all containers covered by this document are to be used/installed exclusively in aircraft lower deck compartments.
Standard

GENERAL REQUIREMENTS FOR NONCERTIFIED LD-2, LD-4, AND LD-8 CARGO/BAGGAGE CONTAINERS
1995-06-01
HISTORICAL
AS1677B
This SAE Aerospace Standard (AS) covers the requirements for three sizes of compartment restrained lower deck containers (unit load devices) for the 767 airplane and which do not require airworthiness certification. NOTE: IATA Specification 50/0, General Technical Requirements and Serviceability limits, should also be taken into account when designing and making equipment according to this specification as certain provisions contained therein will also be applicable.
Standard

General Requirements for Noncertified Cargo/Baggage Containers
2008-06-22
HISTORICAL
AS1677C
This SAE Aerospace Standard (AS) covers the requirements for lower deck containers in wide body and standard body aircraft which do not require airworthiness certification under the condition of compartment restraint and/or, where applicable according to aircraft type, NAS3610 equivalent baseplate-restraint for these containers. NOTE: IATA 50/0, “Requirements for interlining of ULDs”, should also be taken into account when designing and making equipment.
Standard

Air and Air/Surface (Platform) Cargo Pallet Nets
2018-10-18
CURRENT
AS1131C
This SAE Aerospace Standard (AS) provides dimensional, structural and environmental requirements for pallet nets to be used in conjunction with 2.44 m (8 ft) wide pallets described in AS1130. The pallet/net combination are used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be primary importance in providing serviceable, economical, and practical air transport pallet nets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.
Standard

Air Cargo Pallets and Nets Compatibility
2018-10-18
CURRENT
ARP36104A
This SAE Aerospace Recommended Practice (ARP) provides the criteria to be applied in order to determine compatibility with each other of an air cargo pallet and air cargo pallet net airworthiness approved under either NAS 3610 [TSO C90c] or AS36100A [TSO pending] performance and testing requirements.
123Next >Last >>
X