Refine Your Search

Topic

Search Results

Standard

Premium Aircraft-Quality Steel Cleanliness, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

1992-04-01
HISTORICAL
MAM2300A
This specification covers steel cleanliness requirements for premium aircraft-quality ferromagnetic steels by magnetic particle inspection methods, measured in metric (SI) units. Primarily applicable to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, plate, tubing, and extrusions used in fabricating highly-stressed parts where very strict magnetic particle inspection standards are used in final inspection of such parts.
Standard

Steel Cleanliness, Aircraft Quality Steel Magnetic Particle Inspection Procedure Metric (Si) Measurement

2003-03-12
HISTORICAL
MAM2301B
This specification covers steel cleanliness requirements in SI (metric) units for aircraft-quality ferro-megnetic steels, other than hardenable corrosion-resistant steels, by magnetic particle inspection methods. AMS 2301 is the inch/pound version of this MAM. This procedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Steel Cleanliness, Aircraft Quality Steel Magnetic Particle Inspection Procedure Metric (Si) Measurement

1996-03-01
HISTORICAL
MAM2301
This specification covers steel cleanliness requirements in SI (metric) units for aircraft-quality ferro-megnetic steels, other than hardenable corrosion-resistant steels, by magnetic particle inspection methods. AMS 2301 is the inch/pound version of this MAM. This procedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Steel Cleanliness, Aircraft Quality Steel Magnetic Particle Inspection Procedure Metric (Si) Measurement

2001-10-01
HISTORICAL
MAM2301A
This specification covers steel cleanliness requirements in SI (metric) units for aircraft-quality ferro-megnetic steels, other than hardenable corrosion-resistant steels, by magnetic particle inspection methods. AMS 2301 is the inch/pound version of this MAM. This procedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure, Metric (Si) Measurement

2001-05-01
HISTORICAL
MAM2300B
This specification covers steel cleanliness requirements in metric (SI) units for premium aircraft-quality ferromagnetic steels, other than hardenable, corrosion-resistant steels, by magnetic particle inspection methods. AMS 2300 is the inch/pound version of this MAM. This procedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, plate, tubing, and extrusions used in fabricating highly-stressed parts where very strict magnetic particle inspection standards are used in final inspection of such parts, but may be used for qualification of a heat, melt or lot of steel.
Standard

Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure, Metric (Si) Measurement

2003-03-12
HISTORICAL
MAM2300C
This specification covers steel cleanliness requirements in metric (SI) units for premium aircraft-quality ferromagnetic steels, other than hardenable, corrosion-resistant steels, by magnetic particle inspection methods. AMS 2300 is the inch/pound version of this MAM. This procedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, plate, tubing, and extrusions used in fabricating highly-stressed parts where very strict magnetic particle inspection standards are used in final inspection of such parts, but may be used for qualification of a heat, melt or lot of steel.
Standard

Tolerances, Metric, Low-Alloy Steel Sheet, Strip, and Plate

1992-04-01
HISTORICAL
MAM2252
This specification covers established metric manufacturing tolerances applicable to low-alloy steel sheet, strip, and plate ordered to metric dimensions. These tolerances apply to all conditions unless otherwise noted. The term 'excl' is used to apply only to the higher figure of the specified range.
Standard

Tolerances, Metric, Carbon and Alloy Steel Tubing

2007-06-18
CURRENT
MAM2253B
This specification covers established metric manufacturing tolerances applicable to carbon and alloy tubing ordered to metric dimensions. These tolerances apply to all conditions unless otherwise noted. The term 'excl' is used to apply only to the higher figure of the specified range.
Standard

Tolerances, Metric, Carbon and Alloy Steel Tubing

1994-04-01
HISTORICAL
MAM2253
This specification covers established metric manufacturing tolerances applicable to carbon and alloy steel tubing ordered to metric dimensions. These tolerances apply to all conditions unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified range.
Standard

Tolerances, Metric, Carbon and Alloy Steel Tubing

2003-03-12
HISTORICAL
MAM2253A
This specification covers established metric manufacturing tolerances applicable to carbon and alloy steel tubing ordered to metric dimensions. These tolerances apply to all conditions unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified range.
Standard

Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.95cr 0.55mo 0.30v (0.40-0.50c)

2003-03-12
CURRENT
MAM6304B
This specification covers an aircraft-quality, low-alloy, heat-resistant steel in the form of bars, forgings, mechanical tubing, and forging stock procured in SI (metric) units. AMS 6304 is the inch/pound version of this MAM. These products have been used typically for parts, such as shafts, and fasteners, for service up to 540 degrees C, but usage is not limited to such applications.
Standard

Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.95cr 0.55mo 0.30v (0.40-0.50c)

1994-07-01
HISTORICAL
MAM6304A
This specification covers an aircraft-quality, low-alloy, heat-resistant steel in the form of bars, forgings, mechanical tubing, and forging stock procured in SI (metric) units. AMS 6304 is the inch/pound version of this MAM. These products have been used typically for parts, such as shafts, and fasteners, for service up to 540 degrees C, but usage is not limited to such applications.
Standard

Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.95cr 0.55mo 0.30v (0.40-0.50c)

1988-01-01
HISTORICAL
MAM6304
This specification covers an aircraft-quality, low-alloy, heat-resistant steel in the form of bars, forgings, mechanical tubing, and forging stock procured in SI (metric) units. AMS 6304 is the inch/pound version of this MAM. These products have been used typically for parts, such as shafts, and fasteners, for service up to 540 degrees C, but usage is not limited to such applications.
X