Refine Your Search

Search Results

Standard

Dynamic Ozone Test Procedure--Hydraulic Brake Hose

1988-06-01
CURRENT
J1914_198803
The purpose of this recommended practice is to evaluate in the laboratory the effect of flexing on a brake hose when exposed to a high ozone concentration environment. This recommended practice is intended for all vehicle hydraulic brake hoses. It is an accelerated test which subjects the hose to dynamic ozone exposure.
Standard

Application of Hydraulic Brake Hose to Motor Vehicles - Wheel End and Axle

2017-07-27
WIP
J1406
This SAE Recommended Practice covers the application of hydraulic brake hose (as defined by current issue of SAE J1401) as used to provide a flexible hydraulic connection between wheel end or axle brake system components on motor vehicles. The purpose of this document is to outline design, operating, and service factors in routing a hydraulic brake hose assembly to a vehicle. It is intended to serve as a recommended practice for original equipment manufacturers. Vehicle design circumstances may exist that prevent strict adherence to this document. Any deviations should have the concurrence of all engineering functions involved.
Standard

Application of Hydraulic Brake Hose to Motor Vehicles

2002-04-09
HISTORICAL
J1406_200204
This SAE Recommended Practice covers the application of hydraulic brake hose (as defined by current issue of SAE J1401) as used to provide a flexible hydraulic connection between brake system components on motor vehicles. The purpose of this document is to outline design, operating, and service factors in routing a hydraulic brake hose assembly to a vehicle. It is intended to serve as a recommended practice for original equipment manufacturers. Vehicle design circumstances may exist that prevent strict adherence to this document. Any deviations should have the concurrence of all engineering functions involved.
Standard

Application of Hydraulic Brake Hose to Motor Vehicles - Wheel End and Axle

1989-05-01
HISTORICAL
J1406_198905
This SAE Recommended Practice covers the application of hydraulic brake hose (as defined by current issue of SAE J1401) as used to provide a flexible hydraulic connection between wheel end or axle brake system components on motor vehicles. The purpose of this document is to outline design, operating, and service factors in routing a hydraulic brake hose assembly to a vehicle. It is intended to serve as a recommended practice for original equipment manufacturers. Vehicle design circumstances may exist that prevent strict adherence to this document. Any deviations should have the concurrence of all engineering functions involved.
Standard

Application of Hydraulic Brake Hose to Motor Vehicles - Wheel End and Axle

1981-03-01
HISTORICAL
J1406_198103
This SAE Recommended Practice covers the application of hydraulic brake hose (as defined by current issue of SAE J1401) as used to provide a flexible hydraulic connection between wheel end or axle brake system components on motor vehicles. The purpose of this document is to outline design, operating, and service factors in routing a hydraulic brake hose assembly to a vehicle. It is intended to serve as a recommended practice for original equipment manufacturers. Vehicle design circumstances may exist that prevent strict adherence to this document. Any deviations should have the concurrence of all engineering functions involved.
Standard

Application of Hydraulic Brake Hose to Motor Vehicles--Wheel End and Axle

2007-10-04
HISTORICAL
J1406_200710
This SAE Recommended Practice covers the application of hydraulic brake hose (as defined by current issue of SAE J1401) as used to provide a flexible hydraulic connection between wheel end or axle brake system components on motor vehicles. The purpose of this document is to outline design, operating, and service factors in routing a hydraulic brake hose assembly to a vehicle. It is intended to serve as a recommended practice for original equipment manufacturers. Vehicle design circumstances may exist that prevent strict adherence to this document. Any deviations should have the concurrence of all engineering functions involved.
Standard

Automotive Hydraulic Brake System--Metric Banjo Bolt Connections

2002-10-31
HISTORICAL
J1291_200210
This SAE Standard documents dimensional metric specifications for hydraulic brake system threaded ports and banjo bolts for the interconnection of major components in automotive hydraulic brake systems. Banjo blocks are not covered by this document. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices). Some applications may require sizes or forms other than those shown herein, and this document does not preclude such other details when they are required.
Standard

Automotive Hydraulic Brake System - Metric Banjo Bolt Connections

1980-07-01
HISTORICAL
J1291_198007
This SAE Standard documents dimensional metric specifications for hydraulic brake system threaded ports and banjo bolts for the interconnection of major components in automotive hydraulic brake systems. Banjo blocks are not covered by this document. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices). Some applications may require sizes or forms other than those shown herein, and this document does not preclude such other details when they are required.
Standard

Automotive Hydraulic Brake System - Metric Banjo Bolt Connections

2011-12-12
CURRENT
J1291_201112
This SAE Standard documents dimensional metric specifications for hydraulic brake system threaded ports and banjo bolts for the interconnection of major components in automotive hydraulic brake systems. Banjo blocks are not covered by this document. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices). Some applications may require sizes or forms other than those shown herein, and this document does not preclude such other details when they are required.
Standard

Packaging, Storage, and Shelf Life of Hydraulic Brake Hose Assemblies

2005-10-18
HISTORICAL
J1288_200510
This SAE Information Report is the listing of recommendations for the proper packaging, storage, and shelf life limitations of new and unused hydraulic brake hose assemblies. The document embodies the testing, analysis, and experience of many users and manufacturers. Where specific manufacturer's recommendations are made, those recommendations shall supersede the recommendations of this document. This document describes the successful procedures and practices associated with brake hose assemblies usage by a wide cross section of manufacturers and users over several years. The practices are expected to be applicable to all brake hose assemblies which qualify under SAE J1401.
Standard

Packaging, Storage, and Shelf Life of Hydraulic Brake Hose Assemblies

2012-07-05
CURRENT
J1288_201207
This SAE Information Report is the listing of recommendations for the proper packaging, storage, and shelf life limitations of new and unused hydraulic brake hose assemblies. The document embodies the testing, analysis, and experience of many users and manufacturers. Where specific manufacturer's recommendations are made, those recommendations shall supersede the recommendations of this document. This document describes the successful procedures and practices associated with brake hose assemblies usage by a wide cross section of manufacturers and users over several years. The practices are expected to be applicable to all brake hose assemblies which qualify under SAE J1401.
Standard

Packaging, Storage, and Shelf Life cf Hydraulic Brake Hose Assemblies

1999-04-01
HISTORICAL
J1288_199904
This SAE Information Report is the listing of recommendations for the proper packaging, storage, and shelf life limitations of new and unused hydraulic brake hose assemblies. The document embodies the testing, analysis, and experience of many users and manufacturers. Where specific manufacturer's recommendations are made, those recommendations shall supersede the recommendations of this document. This document describes the successful procedures and practices associated with brake hose assemblies usage by a wide cross section of manufacturers and users over several years. The practices are expected to be applicable to all brake hose assemblies which qualify under SAE J1401.
Standard

Packaging, Storage, and Shelf Life of Hydraulic Brake Hose Assemblies

1985-06-01
HISTORICAL
J1288_198506
This SAE Information Report is the listing of recommendations for the proper packaging, storage, and shelf life limitations of new and unused hydraulic brake hose assemblies. The document embodies the testing, analysis, and experience of many users and manufacturers. Where specific manufacturer's recommendations are made, those recommendations shall supersede the recommendations of this document. This document describes the successful procedures and practices associated with brake hose assemblies usage by a wide cross section of manufacturers and users over several years. The practices are expected to be applicable to all brake hose assemblies which qualify under SAE J1401.
Standard

Hot Impulse Test for Hydraulic Brake Hose Assemblies

1988-11-01
HISTORICAL
J1833_198811
This SAE Recommended Practice presents an accelerated test to verify the structural integrity of hydraulic brake hose and the hose-to-fitting seal. It is intended to simulate the effects of environmental aging and braking pressurization on brake hose assemblies. The test is a guide to assist hose designers and/or users in determining brake hose assembly performance characteristics under conditions of heat and pressure.
Standard

Hot Impulse Test for Hydraulic Brake Hose Assemblies

2012-07-05
CURRENT
J1833_201207
This recommended practice describes the equipment, test procedure, and performance requirements for high temperature impulsing of automotive brake hose assemblies with hydraulic brake fluid.
Standard

Rubber Dust Boots for the Hydraulic Disc Brake Piston

1991-09-30
HISTORICAL
J1570_199109
This SAE Standard covers molded rubber boots used on disc brake pistons to prevent the entrance of dirt and moisture which could cause corrosion and otherwise impair caliper operation. The specification include performance tests of brake piston boots of both plain and insert types under specified conditions and does not include requirements relating to chemical composition or physical properties of the rubber compound. Further, it does not cover the strength of the adhesion of rubber to the insert material where an insert is used. The rubber material used in these boots is classified as suitable for operating in a temperature range of -40 to +120 °C +/- 2 °C (-40 to +248 °F +/- 3.6 °F).
Standard

Rubber Seals for Hydraulic Disc Brake Cylinders

1995-01-10
HISTORICAL
J1603_199501
This SAE Standard describes the performance and part requirements for elastomeric seals used in highway vehicle disc brake calipers. Seals covered by this specification may be the solid section type (square, rectangular, O-ring, etc.) mounted stationary in the cylinder bore or on the movable piston.
Standard

Automotive Hydraulic Brake System - Metric Tube Connections

1980-07-01
HISTORICAL
J1290_198007
This SAE Standard documents dimensional metric specifications for hydraulic brake system tubing with flared ends, threaded ports, and male tube nuts for the interconnection of major components in automotive hydraulic brake systems. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices), that are intended to be functionally compatible with International Organization for Standardization Specification, ISO 4038. Some applications may require sizes of forms other than those shown herein, and this document does not preclude such other details when they are required.
X