Search Results

Standard

Groove Design - Metal Face Seal

2013-10-28

HISTORICAL

AIR1108

Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3, which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the purchaser or the manufacturer for use with this AIR. They are also applicable for use with metal o-rings (e.g., MS9142, MS202 thru MS9205) where interchangeability with machined or formed metal seals is desired. For metal o-ring groove designs where inter-changeability is not a requirement refer to ARP 674.

Standard

Groove Design - Metal Face Seal

2019-06-06

CURRENT

AIR1108A

Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3, which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the purchaser or the manufacturer for use with this AIR. They are also applicable for use with metal o-rings (e.g., MS9142, MS202 thru MS9205) where interchangeability with machined or formed metal seals is desired. For metal o-ring groove designs where inter-changeability is not a requirement refer to ARP 674.

Standard

DEFINITIONS, AIRCRAFT ENGINE

1941-11-01

HISTORICAL

AS20

Standard

Definitions, Aircraft Reciprocating Engine Performance

2012-11-01

HISTORICAL

AS20C

This document lists definitions that are commonly used in describing aircraft reciprocating engine performance.

Standard

Modules and Basic Racks of Metric Spur and Helical Gears

2018-09-11

CURRENT

AS1560B

This SAE Aerospace Standard (AS) establishes the standard modules for aerospace metric involute gear teeth and establishes the tooth dimensions of aerospace metric involute gear teeth in terms of the conjugate rack type cutter whose counterpart reference profile is called the basic rack profile of the generated gear, having the tooth dimensions expressed in terms proportional to the module.

Standard

Modules and Basic Racks of Metric Spur and Helical Gears

2012-11-01

HISTORICAL

AS1560A

This SAE Aerospace Standard (AS) establishes the standard modules for aerospace metric involute gear teeth and establishes the tooth dimensions of aerospace metric involute gear teeth in terms of the conjugate rack type cutter whose counterpart reference profile is called the basic rack profile of the generated gear, having the tooth dimensions expressed in terms proportional to the module.

Standard

MODULES AND BASIC RACKS OF METRIC SPUR AND HELICAL GEARS

1979-02-01

HISTORICAL

AS1560

The standard modules in this standard conform with ISO/R 54 and apply to spur and helical involute cylindrical gears.

Standard

OPERATING INSTRUCTIONS FOR AIRCRAFT ENGINES

1944-05-01

HISTORICAL

AS177

This specification covers the requirements for the preparation of Operating Instructions in published form or in manuscript form suitable for publication as designated herein.

Standard

Groove Design, Metal C-Ring Gasket, Face Type Internal Pressure, Metric

2012-11-08

HISTORICAL

MA2537

Standard

Groove Design, Metal C-Ring Gasket, Face Type Internal Pressure, Metric

2018-08-09

CURRENT

MA2537A

Standard

HORSEPOWER CORRECTION FORMULAE

1943-01-01

HISTORICAL

ARP2

Standard

HORSEPOWER CORRECTION FORMULAE

2011-08-10

HISTORICAL

ARP2A

Standard

SPLINES, INVOLUTE

1942-03-01

HISTORICAL

AS84

Standard

SPLINES, INVOLUTE

1944-05-01

HISTORICAL

AS84A

Standard

Involute Spline Gages (30~ Pressure Angle)

1949-05-01

CURRENT

ARP179A

Standard

Groove Design, Metal O-Ring Gasket

2018-03-30

CURRENT

ARP674D

Groove designs presented herein are applicable for use with the following "MS" metal O-ring gaskets conforming to the applicable "AS" standard drawings listed in 1(a) or 1(b), or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 AS9141 - 0.035 tube × 0.006 wall 2 AS9142 - 0.062 tube × 0.006 wall 3 AS9202 - 0.062 tube × 0.010 wall 4 AS9203 - 0.094 tube × 0.006 wall 5 AS9204 - 0.094 tube × 0.010 wall 6 AS9205 - 0.125 tube × 0.010 wall b AMS 5570 or AMS 5576 Silver Plated 1 AS9371 - 0.035 tube × 0.006 wall 2 AS9372 - 0.062 tube × 0.006 wall 3 AS9373 - 0.062 tube × 0.010 wall 4 AS9374 - 0.094 tube × 0.006 wall 5 AS9375 - 0.094 tube × 0.010 wall 6 AS9376 - 0.125 tube × 0.010 wall NOTE: The term "AS gasket" as used in this document refers to the 'MS' part numbers defined on the applicable 'AS' standards listed in 1(a) or 1(b).

Standard

GROOVE DESIGN, METAL O-RING GASKET

1998-01-01

HISTORICAL

ARP674B

Groove designs presented herein are applicable for use with the following MS metal O-ring gaskets, or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 MS9141 - 0.035 tube x 0.006 wall 2 MS9142 - 0.062 tube x 0.006 wall 3 MS9202 - 0.062 tube x 0.010 wall 4 MS9203 - 0.094 tube x 0.006 wall 5 MS9204 - 0.094 tube x 0.010 wall 6 MS9205 - 0.125 tube x 0.010 wall b AMS 5570 or AMS 5576 Silver PI. 1 MS9371 - 0.035 tube x 0.006 wall 2 MS9372 - 0.062 tube x 0.006 wall 3 MS9373 - 0.062 tube x 0.010 wall 4 MS9374 - 0.094 tube x 0.006 wall 5 MS9375 - 0.094 tube x 0.010 wall 6 MS9376 - 0.125 tube x 0.010 wall

Standard

Groove Design, Metal O-Ring Gasket

2012-10-23

HISTORICAL

ARP674C

Groove designs presented herein are applicable for use with the following "MS" metal O-ring gaskets conforming to the applicable "AS" standard drawings listed in 1(a) or 1(b), or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 AS9141 - 0.035 tube × 0.006 wall 2 AS9142 - 0.062 tube × 0.006 wall 3 AS9202 - 0.062 tube × 0.010 wall 4 AS9203 - 0.094 tube × 0.006 wall 5 AS9204 - 0.094 tube × 0.010 wall 6 AS9205 - 0.125 tube × 0.010 wall b AMS 5570 or AMS 5576 Silver Plated 1 AS9371 - 0.035 tube × 0.006 wall 2 AS9372 - 0.062 tube × 0.006 wall 3 AS9373 - 0.062 tube × 0.010 wall 4 AS9374 - 0.094 tube × 0.006 wall 5 AS9375 - 0.094 tube × 0.010 wall 6 AS9376 - 0.125 tube × 0.010 wall NOTE: The term "AS gasket" as used in this document refers to the 'MS' part numbers defined on the applicable 'AS' standards listed in 1(a) or 1(b).

Standard

GROOVE DESIGN, METAL O-RING GASKET

1988-06-20

HISTORICAL

ARP674A

Groove designs presented herein are applicable for use with the following MS metal o-ring gaskets, or to dimensionally equivalent gaskets of other materials: AMS 5570 or AMS 5576 Plain AMS 5570 or AMS 5576 Silver P1. MS9141 - 0.035 tube x 0.006 wall MS9371 - 0.035 tube x 0.006 wall MS9142 - 0.062 tube x 0.006 wall MS9372 - 0.062 tube x 0.006 wall MS9202 - 0.062 tube x 0.010 wall MS9373 - 0.062 tube x 0.010 wall MS9203 - 0.094 tube x 0.006 wall MS9374 - 0.094 tube x 0.006 wall MS9204 - 0.094 tube x 0.010 wall MS9375 - 0.094 tube x 0.010 wall MS9205 - 0.125 tube x 0.010 wall MS9376 - 0.125 tube x 0.010 wall

Standard

METAL RING SEAL GROOVE DESIGN

1964-04-01

HISTORICAL

ARP674

Groove designs presented herein are applicable for use with metal ring seals conforming to MS9142, MS9202, MS9203, MS9204, and MS9205, or modifications thereto as specified herein.