Search Results

The effects of changes in the cetane number of diesel liquid pilot fuels on the ignition delay period in dual fuel engines were investigated experimentally. Different pilot fuel quantities were employed with commercially pure methane, propane and low heating value gaseous fuel mixtures of methane with nitrogen or carbon dioxide over a range of engine load. The ignition delay variation with increased gaseous fuel admission showed a strong dependance on both the quantity and the quality of the pilot fuel used. It was found that the use of high cetane number pilot liquid fuels permitted smaller pilot quantities to be used satisfactorily. Engine operation on propane and low heating value gaseous fuels improved in comparison with dual fuel engine operation employing common diesel fuels.

A model is described for the prediction of the onset of autoignition and knock in compression ignition engines of the dual fuel type. The associated variations with time of performance parameters such as the energy release rate, cylinder pressure and charge temperature, power output and species concentrations can also be obtained. This is achieved through modelling in detail the chemical reaction rates of the gaseous fuel during compression and subsequently during diesel fuel pilot ignition and combustion. A comprehensive reaction scheme involving 105 reaction steps with 31 chemical species is employed for the purpose. The results are based mainly on methane or propane as the gaseous fuel while accounting for the contribution of pilot diesel fuel injection. Calculated data showed good general agreement with the corresponding experimental values.

The present contribution describes an analytical approach for predicting the highest limit for acceptable power or efficiency for any spark ignition engine while ensuring knock free operation. A deterministic gradient based model combined with a simple genetic algorithm were used in association with a two-zone engine combustion model to predict analytically the necessary changes in specified operating parameters to produce optimum performance. Various examples involving mainly spark ignition engine operation with methane-hydrogen fuel mixtures are presented and discussed.

A multi-zone model has been developed for the prediction of the combustion processes in dual fuel engines and some of their performance features. The consequences of the interaction between the gaseous and the diesel fuels and the resulting modification to the combustion processes are considered. A reacting zone has been incorporated in the model to describe the partial oxidation of the gaseous fuel-air mixture while detailed kinetic schemes are employed to describe the oxidation of the gaseous fuel, right from the start of compression to the end of the expansion process. The associated formation and concentrations of exhaust emissions are correspondingly established. The model can predict the onset of knock as well as the operating features and emissions for the more demanding case of light load performance. Predicted values for methane operation show good agreement with corresponding experimental values.

Dual fuel engines compress the air/gas fuel mixture to just below autoignition conditions and then ignite it by the injection of a small amount of liquid fuel. The use and performance of these engines, however, have been limited by knock. Single cylinder engine experiments show that this limitation is a readily defined autoignition phenomenon, and can be analyzed by a mathematical model that indicates the effects on performance imposed by fuel changes and operating conditions. Experimental findings confirm that these performance data correlate broadly with those obtained conventionally in standard spark ignited or motored engines.