Search Results

Loudness of sounds is often assumed to be an adequate indicator of the unwantedness, for general noise control purposes, of sounds. Experiments have shown, however, that for many sounds there are differences between some physical aspects of sound, and judgements of Loudness (soft/loud) compared to judgements of Noisiness (acceptable/unacceptable), which is sometimes called Perceived Noise or Perceived Noise Level, depending on the units used. Internal sound pressure level of two sets of vehicles, commercial and passenger cars, are used to calculate the acoustic parameters: Loudness in sones, according to Stevens and Noisiness in noys according to Kryter. The calculations are similar, but Kryter's Equal Noisiness Contours emphasize the high frequencies. We look for the degree of linear correlation of these acoustic parameters, applying to the experimental data least squares curve fittings. In addition we establish a ranking for both parameters using a specific set of vehicles.

Due to the growing need to reduce the development time of new products, a tendency to rationalize field tests through test benches, in shorter times and with lower costs, has been noted in recent years. During the 90's, such a tendency has generated, in the automotive industry, a great effort to substitute classic field tests, which until recently represented 70% of the development work, for bench tests, with benches well “calibrated” in relation to the traditional methodology. The present work intends to show the development of a test bench to simulate solar radiation and relative humidity effects upon parts and interior lining materials of truck cabins. The traditional test was carried out exposing the cabin to weather conditions in predetermined locations, or in a hot-house, monitoring the cabin interior for temperature and relative humidity variations.

Since the Weber-Fechner Law (1860) until 1950 there was no trustful method to calculate Loudness of complex sounds. At that time, ISO proposed three weighting curves, A, B and C based on rough approximations of the isophonic curves, 40, 70 and 100 phons. It was supposed to be a temporary suggestion. Curves B and C were abandoned, but A weighting survives until today! In 1957, Stevens and Zwicker presented two independent methods to obtain Loudness in sones, based on the new Stevens' Power Law. In 1965, Kryter introduced Noisiness in noys. Stevens in 1975 presented Perceived Magnitude as an improvement of Loudness calculation. In these acoustic parameters, the sound pressure levels per frequency band are transformed into acoustic sensation levels, and through the sensation spectrum the magnitude of the overall sensation is calculated. The A, B and C curves, for low, moderate and high levels do not follow this concept.

In order to attend the more demanding expectations of the commercial vehicles customers, it is being looked for improvements in order to reach better comfort on driving. Among the systems that interact with the driver, the shifting system can be distinguished. The development of a commercial vehicle shifting system is getting complex, because besides making possible the gear changes, it should follow comfort, ergonomics and durability parameters, balancing the necessary robustness for heavy applications with the shift smoothness desired by the user. At the start of the development of commercial vehicles shifting systems, the concept to be applied is analyzed, defining the model. Then it starts the study of the system construction, according to layout parameters of the vehicle project. This stage is predominantly accomplished by computer models. Then the prototypes are manufactured, in which functional tests are made for refinement.

In the work presented to SAE in 1999: IQTC: a Practical and Unified Index to Evaluate the Continuous Improvement of Suppliers, we showed that the Development Area is one of the chapters inserted into the evaluation process of suppliers and answers for an evaluation called IQDP (Quality Index in Product Development). The present work objective is to show the difficulties found in the implementation, solutions and improvements that are being used to outline a better supplier evaluation. Such a control within a universe of 350 suppliers (directly connected to production) being evaluated by 400 persons, in a natural process, is not an easy task. Collecting information about the difficulties faced to evaluate a supplier and the supplier claims to obtain an answer in reply to the attributed scores, took us to the search of the adequate computerized technology that would allow us to group the interests of work methods that would comply with the diverse demands involved.

This paper goes beyond the usual Loudness and make the introduction of a new parameter called Perceived Magnitude, developed by Stevens, as an improvement to qualify/quantify acoustic sensations. As a pioneer application we have applied it to quantify some acoustic sources associated to automotive industry. We emphasize the differences concerning Loudness and Perceived Magnitude, and show the right way to compare the results. The sound pressure level spectra of some sources in octave bands are used to calculate the overall noise in SONES associated to the above parameters as well the usual dB(A). A suggestive and innovative spectral composition weighted by the above functions is introduced to interpret the results. Finally we discuss the benefits we can achieve using the new parameter in vehicle acoustics.

This paper discusses some aspects of durability tests in laboratory, justifying the necessity of a new procedure for data compression. Attention is paid to dynamic tests, with the presence of inertia forces. The new procedure is introduced, which uses concepts of fatigue due to vibration and signal analysis. The compression procedure is applied to generate a synthetic signal for the experimental stress test of an automotive component.

Competition in Automotive Market is driving the need for more time - and cost - effective testing methods. In the fatigue life analysis of new passenger and commercial vehicle designs, laboratory testing through servohydraulic equipment plays a very important role. In DaimlerChrysler do Brasil, the Durability Test Laboratory represents an important basis to assure high endurance reliability for all kinds of our commercial vehicle applications. In order to respond to the above mentioned testing tasks, this paper will focuse what we call our “New Policy of Durability Tests for Commercial Vehicles”, based on development of simple and low cost Road Simulators, fully dedicated and customized to testing of vehicle components and chassis. Experimental results as well as other data related to consumption of laboratory's: area, utilityes, pressurized hoses and test time, will be used in order to illustrate advantages and disadvantages of the new testing resource.

With the increasing necessity of reducing the development time of new products, and also the need to evaluate product reliability levels, a trend to rationalize field tests through test benches has been noted. These tests have proved more and more representative and carried out in much lower times and with lower costs. In the automotive industry this trend has generated considerable effort towards making these bench tests more representative of actual conditions towards the increase of their reliability. The quantity of simulated parameters is growing and it becomes necessary to collect more data from ground measurements signal (acceleration, temperature, pressure, flow, etc.) in experimental vehicles.

During the last years, DaimlerChrysler do Brasil (DCBR) has been moving ahead in order to research and to develop an Automatic Vehicular Location System (AVL System) due to the increase of the security through blocking and tracking devices, monitoring and mainly, logistic solutions that includes maintenance and fleet management. DaimlerChrysler do Brasil faced the necessity to prepare a test that could reflect a real situation, not only to try the system's features regardless communication and management of transmitted data, also however, to ensure the durability and reliability of the on-board vehicles equipment focusing on Brazilian Infrastructure. The objective of this paper is to describe the methodology, used tools and acquired results obtained by DCBR improvement test of his AVL System, throughout the “9o Rally Internacional dos Sertões - 2001”.

The paper goes beyond the conventional way of looking at Loudness. We go into the calculation procedures taking into consideration two methods coming from the work of two researchers: Zwicker and Stevens. These methods are described in ISO 532. Instead of going to the traditional way of comparing the overall noises we penetrate in the calculation processes, step by step, getting subsidies to analyze the contributions of each frequency band. We applied the two methods using some random sound pressure spectra we generated. We are able to compare the total Loudnesses in both methods using a least-square fit with linear approximation. The spectra of contributions in sones in third-octave bands are also compared for both methods, through the development of simple mathematical expressions which are able to identify the parcel correspondent to each third-octave band.

Due to the growing need of reducing development time of new products and also to evaluate their reliability, a growing trend towards reduction of field tests has been noted. Bench tests, in contrast, are being more widely used because of the reduced time to carry them out, at much lower costs. In the automotive industry this trend has led to great efforts to make these bench tests as truthful as possible in order to increase their reliability. The quantity of simulated parameters is growing and this, or course, requires the collection of an ever increasing quantity of data from signal measurements (acceleration, temperature, pressure, flow, etc.) in experimental vehicles.

A mathematical simulation model was developed to calculate the cooling loads in a cab. The cooling loads calculations are described: Solar irradiation through glasses, conduction through the body walls and glasses, conduction through motor compartment, fresh air intake/infiltrations, people and equipments. Fields experiments were conducted to evaluate the conduction through walls and glasses and the total cooling load models. Precision less than 5% was gotten between experimental measurements and model results. In the summer situation, studies about the effects of the cab orientation, the time, the external paint and the tint of the glasses in changing the conduction and solar radiation cooling loads, were conducted. Cab orientation and the time can change this cooling loads by 225%. Variation by 30% was gotten from different paints and glasses.

A mathematical simulation model was developed to calculate the cooling loads in a cab. The cooling loads calculations are described: Solar irradiation through glasses, conduction through the body walls and glasses, conduction through motor compartment, fresh air intake/infiltrations, people and equipments. Fields experiments were conducted to evaluate the conduction through walls and glasses and the total cooling load models. Precision less than 5% was gotten between experimental measurements and model results. In the summer situation, studies about the effects of the cab orientation, the time, the external paint and the tint of the glasses in changing the conduction and solar radiation cooling loads, were conducted. Cab orientation and the time can change this cooling loads by 225%. Variation by 30% was gotten from different paints and glasses.

The paper looks for the degree of linear correlation of some acoustic parameters concerning Speech Intelligibility in vehicles. The Articulation Index (AI) was originally a criterion to characterize the influence of parasite noise on the Intelligibility of a conversation in the design of speech communication systems. Introduced in the automobile acoustics, it is more and more commonly used by vehicles manufacturers to estimate the middle and high frequency content of spectra noise inside various types of vehicles driven under several running conditions. The correlation with Speech Intelligibility, measured through subjective measurements is well known. Presently we have more sophisticated parameters like STI, RASTI, SII… directed mainly to architectural acoustics and sometimes used in vehicle acoustics. They require specific hardwares and softwares and are more complicated to deal with and often are called machine measures of Speech Intelligibility.

Since the rising of the automotive industry, the concern with the driving itself has been the main task of the developments, which have improved the safety-related vehicle systems, such as headlamps and signalling devices that have received significant investments in technology. The paper deals with some functional and durability tests applied to illumination and signalling devices used in the automotive industry. We describe some durability tests like: vibrations, sealing tests, vehicles tests, …… emphasizing the research regarding headlights internal pressure variations relative to the protection against adverse environmental conditions. Concerning functional tests we focus those related to Photometry and Colorimetry, using Psychophysical parameters and the CIE International System XYZ (Commission International de l'Eclairage).

Considering that the opening of the national market varies at the mercy of the economy and the government, Mercedes-Benz do Brasil launched a program to support the local suppliers. Within this program, one may enhance the tool IQTC (Commercial and Technical Qualitative Index). One deals with an index that will enable the supplier to exactly know in which scores he is “weak”, where he is strong and where he has to improve. The transparency regarding the information has to be complete. The general composition of the index will be presented with its criteria and requisites in which the various areas of Mercedes-Benz participate in, with additional details for the IQDP (Quality Index in Product Development), that is the subindex prepared by the Development area. Some practical results involving the evaluation of suppliers will also be shown, whose results, however, will not be nominally quoted.

Because of the increasing need to reduce the time of development of new products, or even to evaluate the reliability of products, one has been noticing a trend to rationalize field tests through essays in ever more representative test benches, within a shorter period of time at a lower cost. In the automotive industry, the trend is to increase the reliability of tests in benches. The quantity of simulated parameters is increasing, what demands an ever increasing survey of data based on measurements of signals of deformation of leaves of spring leaf and courses of suspension in experimental vehicles.