Refine Your Search

Search Results

Standard

J826/3 CAD Model of Legs and Back Hardware for SAE J826 3-D H-Point Machine

2014-10-16
WIP
J826/3
This document describes the CAD model data of legs and back hardware available from SAE for the HPM-1 three-dimensional H-point machine. The elements of the CAD model include the feet, lower and thighs as well as headroom probe and t-bar. Also included are datum points and lines, and calibration references. The intended purpose for this information is to provide a CAD reference for design and benchmarking as well as a calibration reference for the physical HPM-1 audits. The content and format of the data files that are available are also described. The actual CAD model files are included with this product and are provided in the following formats: CATIA v4 (without parametrics), CATIA v5 (without parametrics), IGES, and STEP.
Standard

Motor Vehicle Measurement Certification Standard

2012-08-15
WIP
J3017
This recommended practice applies to any vehicle manufacturer that chooses to publish vehicle dimensions and specifications that may influence customer purchase decisions. The intent is to define standardized vehicle dimensions that reflect showroom conditions and / or dimensions experienced during purchase conditions and also include published dimensions used in marketing / advertising materials irrespective of communications media that influence purchase decisions This document also provides a method to certify OEM and 3rd party compliance with recommended SAE and ISO measurement practices for vehicle dimensions commonly reported publically for marketing and competitive vehicle analysis
Standard

Motor Vehicle Seating Glossary

2010-06-03
WIP
J2897
This document provides technology, terminology, and procedural definitions common in Motor Vehicle seat design and testing.
Standard

Motor Vehicle Dimensions

2001-02-14
HISTORICAL
J1100_200102
This SAE Recommended Practice defines a uniform set of interior and exterior dimensions for passenger cars, multipurpose passenger vehicles, and trucks.
Standard

Motor Vehicle Dimensions

2013-02-11
WIP
J1100
This SAE Recommended Practice defines a set of measurements and standard procedures for motor vehicle dimensions. The dimensions are primarily intended to measure the design intent of a vehicle within a design environment (i.e., CAD). All dimensions in this practice can be measured this way. In addition, some dimensions can be taken in an actual vehicle. If measurements are taken on physical properties, some differences in values should be expected. Also, care should be taken to not confuse design intent measurements with those taken on a physical property. It is intended that the dimensions and procedures described in this practice be generic in their application to both the HPM, described in SAE J826, and the HPM-II, described in SAE J4002. In some circumstances, the figures may only reflect one or the other.
Standard

Motor Vehicle Dimensions

1973-09-01
HISTORICAL
J1100_197309
This SAE Recommended Practice defines a uniform set of interior and exterior dimensions for passenger cars, multipurpose passenger vehicles, and trucks.
Standard

Motor Vehicle Dimensions

1984-06-01
HISTORICAL
J1100_198406
This SAE Recommended Practice defines a set of measurements and standard procedures for motor vehicle dimensions. The dimensions are primarily intended to measure the design intent of a vehicle within a design environment (i.e., CAD). All dimensions in this practice can be measured this way. In addition, some dimensions can be taken in an actual vehicle. If measurements are taken on physical properties, some differences in values should be expected. Also, care should be taken to not confuse design intent measurements with those taken on a physical property. It is intended that the dimensions and procedures described in this practice be generic in their application to both the HPM, described in SAE J826, and the HPM-II, described in SAE J4002. In some circumstances, the figures may only reflect one or the other.
Standard

Motor Vehicle Dimensions

2005-09-29
HISTORICAL
J1100_200509
This SAE Recommended Practice defines a set of measurements and standard procedures for vehicle dimensions. The dimensions are primarily intended to measure the design intent of a vehicle within a design environment (i.e., CAD). All dimensions in this practice can be measured this way. In addition, some dimensions can be taken in an actual vehicle. If measurements are taken on physical properties, some differences in values should be expected. Also, care should be taken to not confuse design intent measurements with those taken on a physical property. Unless otherwise specified, all dimensions are measured normal to the three-dimensional reference system (see SAE J182), except ground-related dimensions, which are defined normal to ground. All dimensions are taken with the vehicle at curb weight unless otherwise specified. All dimensions are measured on the base vehicle and do not include Regular Production Options (RPO) or accessory parts, unless otherwise specified.
Standard

Motor Vehicle Dimensions

2009-11-20
CURRENT
J1100_200911
This SAE Recommended Practice defines a set of measurements and standard procedures for motor vehicle dimensions. The dimensions are primarily intended to measure the design intent of a vehicle within a design environment (i.e., CAD). All dimensions in this practice can be measured this way. In addition, some dimensions can be taken in an actual vehicle. If measurements are taken on physical properties, some differences in values should be expected. Also, care should be taken to not confuse design intent measurements with those taken on a physical property. It is intended that the dimensions and procedures described in this practice be generic in their application to both the HPM, described in SAE J826, and the HPM-II, described in SAE J4002. In some circumstances, the figures may only reflect one or the other.
Standard

2-D CAD Template for SAE J826 H-point Machine

2016-10-13
CURRENT
J826/2_201610
This document describes the 2-D computer-aided design (CAD) template for the HPM-1 H-point machine or HPD available from SAE. The elements of the HPD include the curve shapes, datum points and lines, and calibration references. The intended purpose for this information is to provide a master CAD reference for design and benchmarking. The content and format of the data files that are available are also described.
Standard

Motor Vehicle Seat Dimensions

2014-06-27
WIP
J2732
This document provides dimension definitions that facilitate geometric quantification and evaluation of seats. This document has been designed for use in CAD, however, many dimensions require establishing HPM position and attitude. Refer to the appropriate document for these procedures. These dimensions are package independent in that they do not require use of the HPM-ll supplemental thigh/leg/shoe. Three types of seat geometry reference points and measurements have been developed. 1. Simple reference points and measurements not related to H-point 2. H-point dependent reference points and measurement that utilize the seat characterization capabilities of the HPM to quantify seat measurements 3. Cross sectional seat trim outlines For convenience and simplicity, many terms associated with H-point devices use human body parts in their name.
Standard

Driver Hand Control Reach

2016-03-11
CURRENT
J287_201603
This recommended practice describes boundaries of hand control locations that can be reached by a percentage of different US driver populations in passenger cars, multi-purpose passenger vehicles, and light trucks (Class A vehicles). This practice is not applicable to heavy trucks (Class B vehicles).
Standard

Driver Hand Control Reach

2007-02-27
HISTORICAL
J287_200702
This recommended practice describes boundaries of hand control locations that can be reached by a percentage of different driver populations in passenger cars, multi-purpose passenger vehicles, and light trucks (Class A vehicles). This practice is not applicable to heavy trucks (Class B vehicles).
Standard

Motor Vehicle Fiducial Marks and Three Dimensional Reference System

1990-11-01
HISTORICAL
J182_199011
This SAE Recommended Practice describes a procedure for locating the three-dimensional reference system on a motor vehicle as built. For complete motor vehicle dimensional checks, a method is required for locating the three-dimensional reference system on a motor vehicle so that points of interest (for example, driver eye location, seating reference point, centerline of motor vehicle, etc.) can be determined.
Standard

Motor Vehicle Fiducial Marks and Three-Dimensional Reference System

1997-08-01
HISTORICAL
J182_199708
This SAE Recommended Practice describes a procedure for locating the three-dimensional reference system on a motor vehicle as built. For complete motor vehicle dimensional checks, a method is required for locating the three-dimensional reference system on a motor vehicle so that points of interest (for example, driver eye location, seating reference point, centerline of motor vehicle, etc.) can be determined.
Standard

Motor Vehicle Fiducial Marks and Three-Dimensional Reference System

1973-09-01
HISTORICAL
J182A_197309
This SAE Recommended Practice describes a procedure for locating the three-dimensional reference system on a motor vehicle as built. For complete motor vehicle dimensional checks, a method is required for locating the three-dimensional reference system on a motor vehicle so that points of interest (for example, driver eye location, seating reference point, centerline of motor vehicle, etc.) can be determined.
Standard

Motor Vehicle Fiducial Marks and Three-Dimensional Reference System

1970-06-01
HISTORICAL
J182_197006
This SAE Recommended Practice describes a procedure for locating the three-dimensional reference system on a motor vehicle as built. For complete motor vehicle dimensional checks, a method is required for locating the three-dimensional reference system on a motor vehicle so that points of interest (for example, driver eye location, seating reference point, centerline of motor vehicle, etc.) can be determined.
Standard

Motor Vehicle Fiducial Marks and Three-Dimensional Reference System

2005-04-11
HISTORICAL
J182_200504
This SAE Recommended Practice describes a procedure for locating the three-dimensional reference system on a motor vehicle as built. For complete motor vehicle dimensional checks, a method is required for locating the three-dimensional reference system on a motor vehicle so that points of interest (for example, driver eye location, seating reference point, centerline of motor vehicle, etc.) can be determined.
X