Search Results

Schlieren/shadowgraphy has been adopted in the combustion research as a standard technique for tip penetration analysis of sprays under diesel-like engine conditions. When dealing with schlieren images of reacting sprays, the combustion process and the subsequent light emission from the soot within the flame have revealed both limitations as well as considerations that deserve further investigation. Seeking for answers to such concerns, the current work reports an experimental study with this imaging technique where, besides spatial filtering at the Fourier plane, both short exposure time and chromatic filtering were performed to improve the resulting schlieren image, as well as the reliability of the subsequent tip penetration measurement. The proposed methodology has reduced uncertainties caused by artificial pixel saturation (blooming).

The 4th Workshop of the Engine Combustion Network (ECN) was held September 5-6, 2015 in Kyoto, Japan. This manuscript presents a summary of the progress in experiments and modeling among ECN contributors leading to a better understanding of soot formation under the ECN “Spray A” configuration and some parametric variants. Relevant published and unpublished work from prior ECN workshops is reviewed. Experiments measuring soot particle size and morphology, soot volume fraction (fv), and transient soot mass have been conducted at various international institutions providing target data for improvements to computational models. Multiple modeling contributions using both the Reynolds Averaged Navier-Stokes (RANS) Equations approach and the Large-Eddy Simulation (LES) approach have been submitted. Among these, various chemical mechanisms, soot models, and turbulence-chemistry interaction (TCI) methodologies have been considered.

Visualization of single-hole nozzles into quiescent ambient has been used extensively in the literature to characterize spray mixing and combustion. However in-cylinder flow may have some meaningful impact on the spray evolution. In the present work, visualization of direct diesel injection spray under both non-reacting and reacting operating conditions was conducted in an optically accessible two-stroke engine equipped with a single-hole injector. Two different high-speed imaging techniques, Schlieren and UV-Light Absorption, were applied here to quantify vapor penetration for non-reacting spray. Meanwhile, Mie-scattering was used to measure the liquid length. As for reacting conditions, Schlieren and OH* chemiluminescence were simultaneously applied to obtain the spray tip penetration and flame lift-off length under the same TDC density and temperature. Additionally, PIV was used to characterize in-cylinder flow motion.

Evaporating diesel sprays from multi-hole nozzles have been visualized by means of a double-pass Shadowgraphy/Schlieren technique using a metal mirror attached on the injector-mount plane. Injection has been carried out in an inert environment of nitrogen gas in order to study the mixture process, avoiding mirror and glass window fouling by soot deposition from combustion. Studies have been carried out for four different gas densities during spray injection, changing pressure and temperature. The effect of optical system alignment on image characteristics has been analysed for different beam angles relative to the optical axis. This parameter was varied in a range of 2 degrees to define the optimal optical configuration. If the angle equals 0, the Shadowgraphy/Schlieren system using a light reception back from the metallic mirror captures the spatial gradients of ambient gas density, and turbulent flow structures are clearly registered.

In this work, a 5-zone model has been applied to replicate the in-cylinder conditions evolution of a Rapid Compression-Expansion Machine (RCEM) in order to improve the chemical kinetic analyses by obtaining more accurate simulation results. To do so, CFD simulations under motoring conditions have been performed in order to identify the proper number of zones and their relative volume, walls surface and temperature. Furthermore, experiments have been carried out in an RCEM with different Primary Reference Fuels (PRF) blends under homogeneous conditions to obtain a database of ignition delays and in-cylinder pressure and temperature evolution profiles. Such experiments have been replicated in CHEMKIN by imposing the heat losses and volume profiles of the experimental facility using a 0-D 1-zone model. Then, the 5-zone model has been analogously solved and both results have been compared to the experimental ones.

A new technique which is based on optoacoustic phenomena has been developed for measuring in-cylinder gas temperature and turbulent diffusivity. In the experiments, a high energy Nd:YAG pulsed laser beam was focused to cause local ionization of air at a point in the combustion chamber. This initiates a shock wave and creates a hot spot. The local temperature and turbulent diffusivity are determined by monitoring the shock propagation and the hot spot growth, respectively, with a schlieren photography system. In order to assess the validity and accuracy of the measurements, the technique was also applied to a turbulent jet. The temperature measurements were found to be accurate to within 3%. Results from the turbulent jet measurements also showed that the growth rate of the hot spot diameter can be used to estimate the turbulent diffusivity. In-cylinder gas temperature measurements were made in a motored single cylinder Caterpillar diesel engine, modified for optical access.

The goal of this paper is to obtain a simple fast model that provides information about the spray tip penetration (for free and wall jet), droplets velocity distribution and fuel concentration distribution. This model would be an important first step in the construction of a simple model capable to provide online information about the spray behaviour in engine conditions, although for the moment, the model only concerns cold sprays. As this model is based in momentum and mass flux conservation, and the patterns observed in gaseous turbulent jets, its agreement with experimental Diesel results will help to improve understanding of the spray structure in terms of the similarities and differences with a gas jet, as well as of the importance of the spray front structure in its penetration.

This paper has the objective of characterising the macro and microscopic behaviour of Diesel sprays generated by a common-rail system and quantifying the influence of injection parameters and boundary conditions through a broad experimental study. The main purpose of this research is to validate and extend the different correlations available in the literature to the case of sprays generated by common-rail systems, i.e. at high injection pressures with small nozzle holes. The sprays are characterised in an environment which simulates the in-cylinder air density existing in the real engine when the injection starts. However, it should be pointed out that isothermal conditions at room temperature are considered and very little evaporation occurs.