Refine Your Search

Date

Date

Topic

Topic

Anatomy People and personalities OPTC1, Personnel Protection (General) Bodies and Structures

Search Results

Viewing 1 to 18 of 18
1
Sort by relevance
Standard

Unauthorized Starting or Movement of Machines
2012-05-02
CURRENT
J1083_201205
This SAE Recommended Practice applies to construction, general purpose industrial, forestry, and specialized mining machinery as categorized in SAE J1116. It describes the machine components and systems that should be disconnected, secured, or otherwise rendered inoperative. Deterrent systems or devices covered by this recommended practice are to be used when the machine is shut down per the manufacturer's shut down instructions. It is not the intent of this recommended practice to protect the machine or the authorized machine operator, or to protect against abuse, destructive vandalism, or theft.
Standard

STEERING FOR OFF-ROAD, RUBBER-TIRED MACHINES
1994-02-01
HISTORICAL
J1511_199402
This SAE Standard applies to off-road rubber-tired machines having rated speed capability exceeding 20 km/h. Only the following machine categories in SAE J1116 are included in the scope of this document. a Earthmoving b Other than earthmoving: except rollers and compactors c General purpose industrial d Forestry e Specialized mining machinery Applicable steering systems include the following means of providing power for steering: a Manual steering b Power-assisted steering c Full-power steering This document does not imply that secondary steering is mandatory. However, if secondary steering is provided, performance and test requirements are included.
Standard

Three-Point Hitch (Type A) Backhoe Personnel Protection
2019-08-28
CURRENT
J1518_201908
This SAE Recommended Practice applies to three-point hitch (Type A) backhoes as defined in SAE J326 when mounted on either an agricultural tractor as defined in ANSI/ASAE S390 or other off-road self-propelled work machine as defined in SAE J1116. This criterion is intended for the manufacturer of the backhoe, whether or not the backhoe is manufactured or marketed by the same company that manufactures or markets the propelling machine.
Standard

Three-Point Hitch (Type A) Backhoe Personnel Protection
2013-10-21
HISTORICAL
J1518_201310
This SAE Recommended Practice applies to three-point hitch (Type A) backhoes as defined in SAE J326 when mounted on either an agricultural tractor as defined in ANSI/ASAE S390 or other off-road self-propelled work machine as defined in SAE J1116. This criterion is intended for the manufacturer of the backhoe, whether or not the backhoe is manufactured or marketed by the same company that manufactures or markets the propelling machine.
Standard

FENDERS FOR PNEUMATIC-TIRED EARTHMOVING HAULAGE EQUIPMENT
1967-11-01
HISTORICAL
J321_196711
This recommended practice establishes uniform tire coverage procedures and certain minimum structural requirements for fenders on all wheels of pneumatic-tired earthmoving haulage equipment wherever specified maximum travel speeds exceed 15 mph. Examples of this equipment are heavy construction units such as trucks, scrapers, front-end loaders, tractors, tractor-dozers, pushers, and trailing units.
Standard

Steering Frame Lock for Articulated Loaders and Tractors
2002-12-20
HISTORICAL
J276_200212
This SAE Standard is applicable to articulated frame loaders and tractors as defined by SAE J/ISO 6165, and rollers and compactors as defined by SAE J1017, when equipped with steering, frame locking device. The scope is limited to machines where hazards exist due to maintenance operations.
Standard

Steering Frame Lock for Articulated Loaders and Tractors
2008-01-15
CURRENT
J276_200801
This SAE Standard is applicable to articulated frame loaders and tractors as defined by SAE J/ISO 6165, and rollers and compactors as defined by SAE J1017, when equipped with steering, frame locking device. The scope is limited to machines where hazards exist due to maintenance operations. Purpose This document provides the performance requirements for a steering, frame locking device which when used will prevent unintended articulation of the machine either during shipment or maintenance operations. In addition, it provides mounting position, storage on the machine and identification requirements.
Standard

STEERING FRAME LOCK FOR ARTICULATED LOADERS AND TRACTORS
1981-06-01
HISTORICAL
J276_198106
Structural requirements, selected mounting requirements, and test procedures are established for articulated frame wheel loaders and articulated frame wheel tractors as defined in SAE J1057a (June, 1975).
Standard

STEERING FRAME LOCK FOR ARTICULATED LOADERS AND TRACTORS
1992-11-01
HISTORICAL
J276_199211
This SAE Standard is applicable to articulated frame loaders and tractors as defined by SAE J1057, and rollers and compactors as defined by SAE J1017, when equipped with steering, frame locking device. The scope is limited to machines where hazards exist due to maintenance operations.
Standard

STEERING FRAME LOCK FOR ARTICULATED LOADERS AND TRACTORS
1986-05-01
HISTORICAL
J276_198605
Structural requirements, selected mounting requirements, and test procedures are established for articulated frame wheel loaders and articulated frame wheel tractors as defined in SAE J1057a (June, 1975).
Standard

LIFT ARM SAFETY DEVICE FOR LOADERS
1977-06-01
HISTORICAL
J38_197706
This standard establishes structural, mounting, and test requirements for a lift arm safety device for loaders as defined in SAE J1057a.
Standard

Personnel Protection - Compact Tool Carriers
2021-07-07
CURRENT
J2752_202107
This SAE Recommended Practice applies to compact tool carriers sometimes called, but not limited to mini-loaders, mini skid-steer loaders or compact utility loaders. Machines having a seated-operator position are excluded from this standard. However, certain attachments for a compact tool carrier may provide a seated-operator position for the operation of the attachment.
Standard

Personnel Protection - Compact Tool Carriers
2010-06-21
HISTORICAL
J2752_201006
This SAE Recommended Practice applies to compact tool carriers sometimes called, but not limited to mini-loaders, mini skid-steer loaders or compact utility loaders. Machines having a seated-operator position are excluded from this standard. However, certain attachments for a compact tool carrier may provide a seated-operator position for the operation of the attachment.
Standard

Personnel Protection - Compact Tool Carriers
2015-09-23
HISTORICAL
J2752_201509
This SAE Recommended Practice applies to compact tool carriers sometimes called, but not limited to mini-loaders, mini skid-steer loaders or compact utility loaders. Machines having a seated-operator position are excluded from this standard. However, certain attachments for a compact tool carrier may provide a seated-operator position for the operation of the attachment.
Standard

Nomenclature - Industrial and Agricultural Mowers
2020-11-03
CURRENT
J990_202011
Illustrations used here are not intended to include all existing industrial or agricultural machines, or to be exactly descriptive of any particular machine. They have been picked to describe the principles to be used in applying this standard.
1
X