Refine Your Search

Topic

Search Results

Standard

Snowmobile Drive Mechanisms

2018-06-12
CURRENT
J1279_201806
This SAE Recommended Practice is applicable to snowmobiles as defined in SAE J33.
Standard

Snowmobile Drive Mechanisms

2010-08-26
HISTORICAL
J1279_201008
This SAE Recommended Practice is applicable to snowmobiles as defined in SAE J33.
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

2014-04-09
HISTORICAL
J89_201404
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Snowmobile Brake Control Systems

2019-02-27
CURRENT
J1282_201902
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand brake control systems. This recommendation is not intended to cover competition vehicles, nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable or hydraulic type brake control system, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Snowmobile Brake Control Systems

2012-04-09
HISTORICAL
J1282_201204
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand brake control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable or hydraulic type brake control system, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Snowmobile Brake Control Systems

1980-09-01
HISTORICAL
J1282_198009
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand brake control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable or hydraulic type brake control system, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Recommendations for Children's Snowmobile

2015-11-24
CURRENT
J1038_201511
This SAE Recommended Practice establishes the test procedures, performance requirements, and criteria necessary to evaluate minimum safety and reliability requirements of a children's snowmobile as identified in 1.2.
Standard

Recommendations for Children's Snowmobile

2007-03-16
HISTORICAL
J1038_200703
This SAE Recommended Practice establishes the test procedures, performance requirements, and criteria necessary to evaluate minimum safety and reliability requirements of a children's snowmobile as identified in 1.2.
Standard

Speed Control Assurance for Snowmobiles

2014-08-21
CURRENT
J1222_201408
This SAE Recommended Practice provides minimum requirements and performance criteria for devices to prevent runaway snowmobiles due to malfunction of the speed control system.
Standard

Speed Control Assurance for Snowmobiles

2012-03-12
HISTORICAL
J1222_201203
This SAE Recommended Practice provides minimum requirements and performance criteria for devices to prevent runaway snowmobiles due to malfunction of the speed control system.
Standard

Speed Control Assurance for Snowmobiles

2019-07-19
WIP
J1222
This SAE Recommended Practice provides minimum requirements and performance criteria for devices to prevent runaway snowmobiles due to malfunction of the speed control system.
Standard

Speed Control Assurance for Snowmobiles

1984-10-01
HISTORICAL
J1222_198410
This SAE Recommended Practice provides minimum requirements and performance criteria for devices to prevent runaway snowmobiles due to malfunction of the speed control system.
Standard

Speed Control Assurance for Snowmobiles

1981-02-01
HISTORICAL
J1222_198102
This SAE Recommended Practice provides minimum requirements and performance criteria for devices to prevent runaway snowmobiles due to malfunction of the speed control system.
Standard

Snowmobile Throttle Control Systems

2019-06-06
CURRENT
J92_201906
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles, nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand-control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Snowmobile Throttle Control Systems

2010-08-26
HISTORICAL
J92_201008
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Snowmobile Throttle Control Systems

1995-05-01
HISTORICAL
J92_199505
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Snowmobile Throttle Control Systems

1976-09-01
HISTORICAL
J92_197609
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
X