Search Results

Standard

Starter Battery Identification and Classification

2016-05-26

CURRENT

J2981_201605

To provide the industry with the means to apply a set of rules for identifying and providing a common numbering system for lead acid starting batteries.

Standard

Starter Battery Identification and Classification

2022-01-05

WIP

J2981

To provide the industry with the means to apply a set of rules for identifying and providing a common numbering system for lead acid starting batteries.

Standard

Test Procedure for Battery Flame Retardant Venting Systems

2018-11-12

CURRENT

J1495_201811

This SAE Standard details procedures for testing lead-acid SLI (starting, lighting, and ignition), heavy-duty, EV (electric vehicle), and RV (recreational vehicle) batteries, to determine the effectiveness of the battery venting system to retard the propagation of an externally ignited flame of battery gas into the interior of the battery under sustained overcharge conditions. NOTE: At this time, 2018, there is no known comparable ISO Standard.

Standard

Test Procedure for Battery Flame Retardant Venting Systems

2013-02-11

HISTORICAL

J1495_201302

This SAE Standard details procedures for testing lead-acid SLI (starting, lighting, and ignition), Heavy-Duty, EV (electric vehicle) and RV (recreational vehicle) batteries to determine the effectiveness of the battery venting system to retard the propagation of an externally ignited flame of battery gas into the interior of the battery where an explosive mixture can be present. NOTE: At this time 2011, there is no known comparable ISO Standard.

Standard

Test Procedure for Battery Flame Retardant Venting Systems

2012-08-06

HISTORICAL

J1495_201208

This SAE Standard details procedures for testing lead-acid SLI (starting, lighting, and ignition), Heavy-Duty, EV (electric vehicle) and RV (recreational vehicle) batteries to determine the effectiveness of the battery venting system to retard the propagation of an externally ignited flame of battery gas into the interior of the battery where an explosive mixture can be present.

Standard

STORAGE BATTERIES FOR CONSTRUCTION AND INDUSTRIAL MACHINERY

1976-06-01

HISTORICAL

J930B_197606

This SAE Recommended Practice applies to heavy-duty CIM storage batteries, intended for use on off-highway vehicles and machines generally known as earthmoving equipment. Other performance information is contained in SAE J537.

Standard

STORAGE BATTERIES FOR OFF-ROAD SELF-PROPELLED WORK MACHINES

1995-06-01

HISTORICAL

J930_199506

This SAE Standard applies to all types of heavy-duty storage batteries for use on off-road machines as described in SAE J1116. Included are definitions of industry terms, test procedures, general requirements, application recommendations, standard sizes, overall dimensions, and electrical values.

Standard

STORAGE BATTERIES FOR OFF-ROAD WORK MACHINES

1984-08-01

HISTORICAL

J930_198408

This SAE Recommended Practice applies to all types of heavy-duty storage batteries intended for use on off-road work machines as described in SAE J1116. Included are definitions, test procedures, general requirements, application recommendations, standard sizes, overall dimensions, and electrical values.

Standard

Storage Batteries for Off-Road Self-Propelled Work Machines

2016-05-10

HISTORICAL

J930_201605

This SAE Standard applies to all types of heavy-duty storage batteries for use on off-road machines as described in SAE J1116. Included are definitions of industry terms, test procedures, general requirements, application recommendations, standard sizes, overall dimensions, and electrical values.

Standard

Storage Batteries for Off-Road Self-Propelled Work Machines

2022-06-02

CURRENT

J930_202206

This SAE Standard applies to all types of heavy-duty storage batteries for use on off-road machines as described in SAE J1116. Included are definitions of industry terms, test procedures, general requirements, application recommendations, standard sizes, overall dimensions, and electrical values.

Standard

Automotive and Heavy Duty Storage Battery Vibration

2022-06-02

CURRENT

J3060_202206

This SAE Standard serves as a guide for vibration testing procedures of Automotive and Heavy Duty storage batteries.

Standard

Automotive and Heavy Duty Storage Battery Vibration

2016-04-27

HISTORICAL

J3060_201604

This SAE Standard serves as a guide for vibration testing procedures of Automotive and Heavy Duty storage batteries.

Standard

LIFE TEST FOR AUTOMOTIVE STORAGE BATTERIES

1982-06-01

HISTORICAL

J240_198206

This SAE Recommended Practice applies to 12 V, automotive storage batteries of 180 min or less reserve capacity. This life test simulates automotive service when the battery operates in a voltage regulated charging system. It subjects the battery to charge and discharge cycles comparable to those encountered in automotive service. Other performance and dimensional information is contained in the latest issue of SAE J537. This SAE Recommended Practice is intended as a guide toward standard practice, but may be subject to change to keep pace with experience and technical advances.

Standard

LIFE TEST FOR AUTOMOTIVE STORAGE BATTERIES

1971-05-01

HISTORICAL

J240_197105

This life test simulates automotive service where the battery operates in a voltage regulated charging system. This test subjects the battery to charge and discharge cycles resulting in failure modes comparable to those encountered in automotive service. 1 The battery is tested in a water bath maintained at 105 ± 5 F. 2 The test cycle is performed as follows: Discharge: 2 min at 25 A Charge: (a) maximum voltage — 14.8 (b) maximum rate — 25 A (c) time — 10 min 3 The battery is continuously cycled for 100 h (for example, Mon day noon until 4:00 p.m. Friday).

Standard

Life Test for Heavy-Duty Storage Batteries (Lead Acid Type only)

2018-01-24

CURRENT

J2185_201801

This SAE Standard applies to lead-acid 12 V heavy-duty storage batteries as described in SAE J537 and SAE J930 for uses in starting, lighting and ignition (SLI) applications on motor vehicles and/or off-road machines. These applications have some of the following characteristics: a High levels of power are required to start the vehicle’s internal combustion engine. The need to supply this power limits the maximum depth of discharge to a fraction of the total capacity of the battery.

Standard

Life Test for Heavy-Duty Storage Batteries (Lead Acid Type only)

2012-02-21

HISTORICAL

J2185_201202

This SAE Standard applies to lead-acid 12 V heavy-duty storage batteries as described in SAE J537 and SAE J930 for uses in starting, lighting and ignition (SLI) applications on motor vehicles and/or off-road machines. These applications have some of the following characteristics: a High levels of power are required to start the vehicle’s internal combustion engine. The need to supply this power limits the maximum depth of discharge to a fraction of the total capacity of the battery.

Standard

LIFE TEST FOR HEAVY-DUTY STORAGE BATTERIES

1997-09-01

HISTORICAL

J2185_199709

This SAE Recommended Practice applies to 12 V storage batteries which operate in a voltage regulated charging system. It simulates heavy-duty applications by subjecting the battery to deeper discharge and charge cycles than those encountered in starting a vehicle. The deeper discharge and charge cycles in service may come from a combination of the following conditions: a Frequent occurrences of total electrical load exceeding the alternator output. b Frequent occurrences of battery system supplying the electrical loads when the engine is not operating. c Frequent occurrences of prolonged vehicle storage combined with high vehicle key-off loads. Batteries will be classified into two types for this life test. Type 1 applies to batteries with reserve capacity of 200 min or less. Type 2 applies to batteries with reserve capacity greater than 200 min. (“C” value for Type 1 equals 25.0; “C” value for Type 2 equals 50.0.)

Standard

Life Test for Automotive Storage Batteries

2007-04-24

HISTORICAL

J240_200704

This SAE Standard applies to 12 V, flooded lead acid automotive storage batteries of 180 minutes or less reserve capacity using cast positive grid technology only. This life test simulates automotive service when the battery operates in a voltage regulated charging system. It subjects the battery to charge and discharge cycles comparable to those encountered in automotive service. Other performance and dimensional information is contained in the latest issue of SAE J537. This document is intended as a guide toward standard practice, but may be subject to change to keep pace with experience and technical advances.

Standard

Life Test for Automotive Storage Batteries

2012-12-03

CURRENT

J240_201212

This SAE Standard applies to 12 V, flooded lead acid automotive storage batteries of 180 minutes or less reserve capacity using cast positive grid technology only. This life test simulates automotive service when the battery operates in a voltage regulated charging system. It subjects the battery to charge and discharge cycles comparable to those encountered in automotive service. Other performance and dimensional information is contained in the latest issue of SAE J537. This document is intended as a guide toward standard practice, but may be subject to change to keep pace with experience and technical advances.

Standard

Storage Batteries

2016-04-05

HISTORICAL

J537_201604

This SAE Standard serves as a guide for testing procedures of automotive 12 V storage batteries.