Search Results

The ride dynamics of typical North-American soil compactors were investigated via analytical and experimental methods. A 12-degrees-of-freedom in-plane ride dynamic model of a single-drum compactor was formulated through integrations of the models of various components such as driver seat, cabin, roller drum and drum isolators, chassis and the tires. The analytical model was formulated for the transit mode of operation at a constant forward speed on undeformable surfaces with the roller vibrator off. Field measurements were conducted to characterize the ride vibration environments during the transit mode of operation. The measured data revealed significant magnitudes of whole-body vibration of the operator-station along the vertical, lateral, pitch and roll-axes. The model results revealed reasonably good agreements with ranges of the measured vibration data.

The ride performance potentials of a prototype torsio-elastic axle suspension for an off-road vehicle were investigated analytically and experimentally. A forestry vehicle was fitted with the prototype suspension at its rear axle to assess its ride performance benefits. Field measurements of ride vibration along the vertical, lateral, fore-aft, roll and pitch axes were performed for the suspended and an unsuspended vehicle, while traversing a forestry terrain. The measured vibration responses of both vehicles were evaluated in terms of unweighted and frequency-weighted rms accelerations and the acceleration spectra, and compared to assess the potential performance benefits of the proposed suspension. The results revealed that the proposed suspension could yield significant reductions in the vibration magnitudes transmitted to the operator's station.

Dynamic fluid slosh and its influence on the dynamic roll stability of a partially filled tank truck has been investigated through a field test program undertaken jointly by the CONCAVE Research Centre and Transportation Technology and Energy Branch of Ontario Ministry of Transportation. The paper describes the test methodology, instrumentation, data acquisition, fluid slosh behaviour, and its influence on the directional response of the tank truck. The data acquired during different directional maneuvers is analyzed to highlight the fluid slosh and its impact on the dynamic load transfer and roll stability of the vehicle. The magnitude of dynamic load transfer, derived from the video records of the dynamic fluid movement, is presented and discussed for various tank fill levels and directional maneuvers. The test results revealed that the magnitude of dynamic fluid slosh is strongly related to the vehicle speed, lateral and longitudinal acceleration, and the fill level.

The optimal damping design of roll plane interconnected hydro-pneumatic suspension is investigated, in order to improve vertical ride and road-friendliness of heavy vehicles, while maintaining enhanced roll stability. A nonlinear roll plane vehicle model is developed to study vertical as well as roll dynamics of heavy vehicles. The damping valves and gas chamber are integrated within the same suspension strut unit to realize compact design. The influence of variations in damping valve threshold velocity on relative roll stability is explored, under centrifugal acceleration excitations arising from steady turning and lane change maneuvers, as well as crosswind. The effects of damping valve design parameters on the vertical ride vibration and vehicle-road interaction characteristics are also investigated under a medium rough road input and two different vehicle speeds.

A closed-loop articulated vehicle-driver model, incorporating the path errors, lateral accelerations of the two units and the rate of steering, is proposed to study the directional control behavior of the driver. The closed-loop driver-vehicle model is formulated upon integrating the yaw-plane model of a five-axle articulated vehicle and a comprehensive driver model. The driver model, incorporating the delays associated with the limb movement and muscle activities, is developed with an objective to minimize the lateral acceleration of vehicle, and the lateral position and orientation errors between the previewed and the actual path of the tractor. Various parameters required to describe the driver's contributions are identified through minimizing a weighted performance index subject to an array of limit constraints established from the reported data.

Automotive suspensions invariably exhibit asymmetric damping properties in compression and rebound, which is partly attributed to asymmetric damping and in-part to the suspension linkage kinematics together with tire lateral compliance. Although automotive suspensions have invariably employed asymmetric damping, the design guidelines and particular rationale for such asymmetry has not been explicitly defined. The influences of damper asymmetry together with the suspension kinematics and tire lateral compliance on the dynamic responses of a vehicle are investigated analytically under bump and pothole excitations, and the results are interpreted in view of potential design guidance. A quarter-car kineto-dynamic model of the road vehicle employing a double wishbone type suspension comprising a strut with linear spring and multiphase asymmetric damper is formulated for the analyses.