Refine Your Search

Search Results

Standard

Nonmetallic Trim Materials--Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas

2009-07-20
HISTORICAL
J322_200907
This SAE Recommended Practice is designed to reveal discoloration which may occur when nonmetallic materials used for trimming automobiles are exposed for a limited time to an atmosphere containing hydrogen sulfide. NOTE 1: CAUTION-Hydrogen sulfide gas is extremely hazardous. Use of this substance may be fatal if proper precautions are not taken. This test method does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. NOTE 2: A fume hood and adequate ventilation should be provided at all times during testing.
Standard

Nonmetallic Trim Materials-Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas

2003-12-12
HISTORICAL
J322_200312
This SAE Recommended Practice is designed to reveal discoloration which may occur when nonmetallic materials used for trimming automobiles are exposed for a limited time to an atmosphere containing hydrogen sulfide. NOTE 1: CAUTION-Hydrogen sulfide gas is extremely hazardous. Use of this substance may be fatal if proper precautions are not taken. This test method does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. NOTE 2: A fume hood and adequate ventilation should be provided at all times during testing.
Standard

Nonmetallic Trim Materials--Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas

1985-12-01
HISTORICAL
J322_198512
This SAE Recommended Practice is designed to reveal discoloration which may occur when nonmetallic materials used for trimming automobiles are exposed for a limited time to an atmosphere containing hydrogen sulfide. NOTE 1: CAUTION-Hydrogen sulfide gas is extremely hazardous. Use of this substance may be fatal if proper precautions are not taken. This test method does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. NOTE 2: A fume hood and adequate ventilation should be provided at all times during testing.
Standard

Felts - Wool and Part Wool

2012-08-24
CURRENT
J314_201208
This SAE Standard identifies chemical/mechanical properties, thickness, width, mass, and other requirements recommended for felts (refer to Tables 1 and 2). It was developed with the cooperation of the Standardization Committee of the Felt Association, Inc., and in accordance with the ASTM tests indicated in the document. The commercial trade designations of the more commonly used grades of automotive felts are given along with complete specifications and tolerances for thickness, mass, wool content, chemical and physical requirements, color, and width. General information, recommended uses, etc., are published in Appendix A as a guide in the selection of felts for particular uses, but the requirements for each application should be taken into consideration in making final selections.
Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

2002-07-26
HISTORICAL
J912_200207
This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.
Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

1994-08-01
HISTORICAL
J912_199408
This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.
Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

2007-11-02
HISTORICAL
J912_200711
This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.
Standard

Method of Testing Resistance to Crocking of Organic Trim Materials

2003-12-03
HISTORICAL
J861_200312
This test can be used to determine the resistance to crocking (color rub-off) of organic trim materials such as fabrics, vinyl coated fabrics, leather, coated fiberboard and carpet. This method is similar to AATCC Method 8 - Colorfastness to Crocking.
X