Refine Your Search

Topic

Search Results

Standard

Heavy Duty OBD IUMPR Data Collection Tool Process

2018-09-04
CURRENT
J3162_201809
This document describes the collection of IUMPR data required by the Heavy Duty On-Board Diagnostic regulation 13 CCR 1971.1 (l)(2.3.3), using SAE J1939-defined messages incorporated in a suite of software functions.
Standard

On Board Diagnostics Implementation Guide

2015-11-05
CURRENT
J1939/3_201511
SAE J1939-03 provides requirements and guidelines for the implementation of On Board Diagnostics (OBD) on heavy-duty vehicles (HDV) using the SAE J1939 family of standards. The guidelines identify where the necessary information to meet OBD regulations may be found among the SAE J1939 document set. Key requirements are identified here to insure the interoperability of OBD scan tools across individual OBD compliant vehicles. Market-defined regulations permit the use of SAE J1939 to meet OBD requirements. Implementers are cautioned to obtain and review the specific regulations for the markets where their products are sold. This document is focused on guidelines and requirements to satisfy the State of California Air Resources Board (ARB), the authors of 13 CCR 1971.1, United States Environmental Protection Agency, Euro IV and V requirements from European Commission directives, and UN/ECE WP 29 GRPE WWH OBD Global Technical Regulation (GTR).
Standard

On Board Diagnostics Implementation Guide

2008-12-08
HISTORICAL
J1939/3_200812
SAE J1939-03 provides requirements and guidelines for the implementation of On Board Diagnostics (OBD) on heavy-duty vehicles (HDV) using the SAE J1939 family of standards. The guidelines identify where the necessary information to meet OBD regulations may be found among the SAE J1939 document set. Key requirements are identified here to insure the interoperability of OBD scan tools across individual OBD compliant vehicles. Market-defined regulations permit the use of SAE J1939 to meet OBD requirements. Implementers are cautioned to obtain and review the specific regulations for the markets where their products are sold. This document is focused on guidelines and requirements to satisfy the State of California Air Resources Board (ARB), the authors of 13 CCR 1971.1, United States Environmental Protection Agency, Euro IV and V requirements from European Commission directives, and UN/ECE WP 29 GRPE WWH OBD Global Technical Regulation (GTR)
Standard

CAN FD Physical Layer, 500 kbps/2 Mbps

2017-06-15
WIP
J1939-17
This document defines a physical layer having a higher bandwidth capacity than the classic physical layers defined for SAE J1939-14 by using flexible data rates. CAN controllers are now available which support the Flexible Data Rate Frame Format as defined in ISO 11898-1:2015. These controllers and compatible high speed transceivers are required for use on SAE J1939-17 networks. This SAE Recommended Practice is intended for light- and heavy-duty vehicles on- or off-road as well as appropriate stationary applications which use vehicle derived components (e.g., generator sets). Vehicles of interest include but are not limited to: on- and off-highway trucks and their trailers; construction equipment; and agricultural equipment and implements.
Standard

CAN FD Data Link Layer

2018-05-09
WIP
J1939-22
The SAE J1939 documents are intended for light, medium, and heavy-duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g., generator sets). Vehicles of interest include, but are not limited to, on- and off-highway trucks and their trailers, construction equipment, and agricultural equipment and implements. The purpose of these documents is to provide an open interconnect system for electronic systems. It is the intention of these documents to allow Electronic Control Units to communicate with each other by providing a standard architecture. This particular document, SAE J1939-22, describes the data link layer using the Flexible Data Rate Extended Frame Format (FEFF) with 29-bit Identifiers, as defined in ISO 11898-1, December 2015. For SAE J1939 no alternative data link layers are permitted using FEFF messages.
Standard

SAE J1939 Network Security

2017-03-06
WIP
J1939-91
This document will provide recommendations to vehicle manufacturers and component suppliers in securing the SAE J1939-13 connector interface from the cybersecurity risks posed by the existence of this connector.
Standard

SAE J1939 Functional Safety Communications Protocol

2019-07-15
WIP
J1939-76

This document provides the technical requirements for implementing the SAE J1939 Functional Safety Communication Protocol in a manner determined suitable for meeting industry applicable functional safety standards.

Standard

SAE J1939 Functional Safety Communications Protocol

2018-11-26
CURRENT
J1939-76_201811
This document provides the technical requirements for implementing the SAE J1939 Functional Safety Communication Protocol in a manner determined suitable for meeting industry applicable functional safety standards.
Standard

Automatic Baud Rate Detection Process

2018-11-05
CURRENT
J1939/16_201811
Define a process enabling devices to detect the baud rate of a SAE J1939-11, SAE J1939-14, or SAE J1939-15 network automatically with the intent of minimizing or eliminating communication disruption between existing devices. These networks only support CBFF and CEFF Data Frames, as defined in ISO 11898-1.
Standard

Automatic Baud Rate Detection Process

2015-10-14
HISTORICAL
J1939/16_201510
Define a process enabling devices to detect the baud rate of a network automatically with the intent of minimizing or eliminating communication disruption between existing devices.
Standard

OBD Traceability Matrix

2019-02-05
CURRENT
J1939-90_201902
This Information Report is intended to supplement the J1939 documents by offering the application of SAE RP J1939 to OBD data communications in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual regulations and standards documents, and any discrepancies between this document and the published documents must be resolved in favor of the published documents. This spreadsheet outlines elements in ARB OBD II and HD OBD requirements and identifies which J1939 SPNs and messages may be used to satisfy the datastream, readiness, in-use ratio, and test results requirements.
Standard

Application - Configurable Messaging

2006-11-21
HISTORICAL
J1939/74_200611
The SAE J1939 documents are intended for light, medium, and heavy-duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to, on- and off-highway trucks and their trailers, construction equipment, and agricultural equipment and implements. The purpose of these documents is to provide an open interconnect system for electronic systems. It is the intention of these documents to allow Electronic Control Units to communicate with each other by providing a standard architecture. This particular document, SAE J1939-74, describes the message structure for a set of messages which enable the user to determine and announce to others on the network, the parameter placement within a particular message from the special set of messages defined within this document.
Standard

Application—Configurable Messaging

2010-11-05
HISTORICAL
J1939/74_201011
The SAE J1939 documents are intended for light, medium, and heavy-duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to, on- and off-highway trucks and their trailers, construction equipment, and agricultural equipment and implements. The purpose of these documents is to provide an open interconnect system for electronic systems. It is the intention of these documents to allow Electronic Control Units to communicate with each other by providing a standard architecture. This particular document, SAE J1939-74, describes the message structure for a set of messages which enable the user to determine and announce to others on the network, the parameter placement within a particular message from the special set of messages defined within this document.
Standard

Application - Configurable Messaging

2015-09-22
CURRENT
J1939/74_201509
The SAE J1939 documents are intended for light, medium, and heavy-duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to, on- and off-highway trucks and their trailers, construction equipment, and agricultural equipment and implements. The purpose of these documents is to provide an open interconnect system for electronic systems. It is the intention of these documents to allow Electronic Control Units to communicate with each other by providing a standard architecture. This particular document, SAE J1939-74, describes the message structure for a set of messages which enable the user to determine and announce to others on the network, the parameter placement within a particular message from the special set of messages defined within this document.
Standard

Application Layer—Generator Sets and Industrial

2011-05-16
HISTORICAL
J1939/75_201105
SAE J1939-75 Generator Sets and Industrial Applications defines the set of data parameters (SPNs) and messages (PGNs) for information predominantly associated with monitoring and control generators and driven equipment in electric power generation and industrial applications. Applications using the SAE J1939-75 document may need to reference SAE J1939-71 for the SAE J1939 parameters and messages for monitoring and controlling the power units, e.g. engines and turbines, that power the generators and driven industrial equipment.
Standard

Application Layer - Generator Sets and Industrial

2015-11-05
CURRENT
J1939/75_201511
SAE J1939-75 Generator Sets and Industrial Applications defines the set of data parameters (SPNs) and messages (PGNs) for information predominantly associated with monitoring and control generators and driven equipment in electric power generation and industrial applications. The data parameters (SPNs) and messages (PGNs) previously published within this document are now published in SAE J1939DA. Applications using the SAE J1939-75 document may need to reference SAE J1939DA for the SAE J1939 parameters and messages for monitoring and controlling the power units, e.g., engines and turbines, that power the generators and driven industrial equipment.
Standard

Physical Layer, 500 Kbps

2016-12-01
CURRENT
J1939/14_201612
This document defines a physical layer having a higher bandwidth capacity than other physical layers defined for SAE J1939. Newer transceiver technologies are utilized to minimize EMI. CAN controllers are now available which support the Flexible Data Rate Frame Format. These controllers, when used on SAE J1939-14 networks, must be restricted to use only the Classical Frame Format compliant to ISO 11898-1:2015. This SAE Recommended Practice is intended for light- and heavy-duty vehicles on- or off-road as well as appropriate stationary applications which use vehicle derived components (e.g., generator sets). Vehicles of interest include but are not limited to: on- and off-highway trucks and their trailers; construction equipment; and agricultural equipment and implements.
Standard

Physical Layer, 500 Kbps

2011-10-05
HISTORICAL
J1939/14_201110
This document defines a physical layer having a higher bandwidth capacity than other physical layers defined for SAE J1939. Newer transceiver technologies are utilized to minimize EMI. This SAE Recommended Practice is intended for light- and heavy-duty vehicles on- or off-road as well as appropriate stationary applications which use vehicle derived components (e.g., generator sets). Vehicles of interest include but are not limited to: on- and off-highway trucks and their trailers; construction equipment; and agricultural equipment and implements.
Standard

Off-Board Diagnostic Connector

2016-10-25
CURRENT
J1939/13_201610
SAE J1939-13 specifies the diagnostic connectors used for off-board connection to a vehicle’s SAE J1939 communication links. The defined diagnostic connectors support connection to the twisted shielded pair media (SAE J1939-11), the unshielded twisted pair (SAE J1939-15), the twisted pair of (SAE J1939-14), as well as the twisted unshielded quad media (ISO 11783-2).
Standard

Off-Board Diagnostic Connector

2011-10-05
HISTORICAL
J1939/13_201110
SAE J1939-13 specifies the diagnostic connectors used for off-board connection to a vehicle’s SAE J1939 communication links. The defined diagnostic connectors support connection to the twisted shielded pair media (SAE J1939-11), the Reduced Physical Layer unshielded twisted pair (SAE J1939-15), the unshielded twisted pair of SAE J1939-14, as well as the twisted unshielded quad media (ISO 11783-2).
X