Search Results

This document will provide recommendations to vehicle manufacturers and component suppliers in securing the SAE J1939-13 connector interface from the cybersecurity risks posed by the existence of this connector.

This document specifies the technical requirements for several different trailers that may be incorporated into J1939-22 C-PG payloads to provide safety assurance data. Proper use of these trailers is suitable for meeting applicable functional safety standards for a given industry. This document provides enough details for trailers that another document (likely SAE J1939-22) can incorporate these details into specific trailer formats. Accordingly, this document does not define the Type of Service (TOS) or Trailer Format (TF) values to use for these trailers, nor does it define the position of these trailers relative to other trailers that provide security assurance data.

This document is intended to supplement SAE J2403 by providing the content of Table 1, Table 2, and Table 3 from SAE J2403 in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual document, and any discrepancies between this Digital Annex and the published SAE J2403 document must be resolved in favor of the published document. This document provides the content of Table 1 and Table 2 published in SAE J2403 into the single table in the 'Term' tab, while the 'Recommended Term Definitions' tab provides the content of Table 3 in SAE J2403 and the 'Glossary' tab provides the content of Table 4 in SAE J2403.

This document is intended to supplement SAE J2403 by providing the content of Table 1, Table 2, and Table 3 from SAE J2403 in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual document, and any discrepancies between this Digital Annex and the published SAE J2403 document must be resolved in favor of the published document. This document provides the content of Table 1 and Table 2 published in SAE J2403 into the single table in the 'Term' tab, while the 'Recommended Term Definitions' tab provides the content of Table 3 in SAE J2403 and the 'Glossary' tab provides the content of Table 4 in SAE J2403.

This document is intended to supplement SAE J2403 by providing the content of Table 1, Table 2, and Table 3 from SAE J2403 in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual document, and any discrepancies between this Digital Annex and the published SAE J2403 document must be resolved in favor of the published document. This document provides the content of Table 1 and Table 2 published in SAE J2403 into the single table in the 'Term' tab, while the 'Recommended Term Definitions' tab provides the content of Table 3 in SAE J2403 and the 'Glossary' tab provides the content of Table 4 in SAE J2403.

This document is intended to supplement SAE J2403 by providing the content of Table 1, Table 2, and Table 3 from SAE J2403 in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual document, and any discrepancies between this Digital Annex and the published SAE J2403 document must be resolved in favor of the published document. This document provides the content of Table 1 and Table 2 published in SAE J2403 into the single table in the 'Term' tab, while the 'Recommended Term Definitions' tab provides the content of Table 3 in SAE J2403 and the 'Glossary' tab provides the content of Table 4 in SAE J2403.

The purpose of this Recommended Practice is to verify that vehicles and/or components are capable of communicating a required set of information, in accordance with the diagnostic messages specified in SAE J1939-73, to fulfill the off-board diagnostic tool interface requirements contained in the government regulations cited below. This document describes the tests, methods, and results for verifying diagnostic communications from an off board diagnostic tool (i.e., scan tool) to a vehicle and/or component. SAE members have generated this document to serve as a guide for testing vehicles for compliance with ARB and other requirements for emissions-related on-board diagnostic (OBD) functions for heavy duty engines used in medium and heavy duty vehicles. The development of HD OBD regulations by US EPA and California’s Air Resources Board (ARB) require that diagnostic message services are exercised to evaluate diagnostic communication standardization requirements on production vehicles.

The purpose of this SAE Recommended Practice is to verify that vehicles and/or components are capable of communicating a required set of information, which is described by the diagnostic messages specified in SAE J1939-73, that is in accordance with off-board diagnostic tool interface requirements contained in the government regulations cited below. This document describes the tests, methods, and results for verifying diagnostic communications from an off-board diagnostic tool (i.e., scan tool) to a vehicle and/or component. SAE members have generated this document to serve as a guide for testing vehicles for compliance with ARB and other requirements for emissions-related on-board diagnostic (OBD) functions for heavy-duty engines used in medium- and heavy-duty vehicles. The development of HD OBD regulations by U.S.

This document describes the application of the SAE J1939 recommended practices for compliance with on-board diagnostic malfunction detection system requirements for marine sterndrive and inboard spark ignition engines, as mandated by the California Air Resources Board (CARB). These Otto-cycle engines are not derived from automotive diesel-cycle engines.

SAE J1939-03 provides requirements and guidelines for the implementation of On Board Diagnostics (OBD) on heavy-duty vehicles (HDV) using the SAE J1939 family of standards. The guidelines identify where the necessary information to meet OBD regulations may be found among the SAE J1939 document set. Key requirements are identified here to insure the interoperability of OBD scan tools across individual OBD compliant vehicles. Market-defined regulations permit the use of SAE J1939 to meet OBD requirements. Implementers are cautioned to obtain and review the specific regulations for the markets where their products are sold. This document is focused on guidelines and requirements to satisfy the State of California Air Resources Board (ARB), the authors of 13 CCR 1971.1, United States Environmental Protection Agency, Euro IV and V requirements from European Commission directives, and UN/ECE WP 29 GRPE WWH OBD Global Technical Regulation (GTR)

These Recommended Practices are intended for light, medium, and heavy duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to: on and off highway trucks and their trailers; construction equipment; and agricultural equipment and implements. The purpose of these Recommended Practices is to provide an open interconnect system for electronic systems. It is the intention of these Recommended Practices to allow Electronic Control Units to communicate with each other by providing a standard architecture.

These Recommended Practices are intended for light, medium, and heavy duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to: on and off highway trucks and their trailers; construction equipment; and agricultural equipment and implements. The purpose of these Recommended Practices is to provide an open interconnect system for electronic systems. It is the intention of these Recommended Practices to allow Electronic Control Units to communicate with each other by providing a standard architecture.

These Recommended Practices are intended for light, medium, and heavy duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to: on and off highway trucks and their trailers; construction equipment; and agricultural equipment and implements. The purpose of these Recommended Practices is to provide an open interconnect system for electronic systems. It is the intention of these Recommended Practices to allow Electronic Control Units to communicate with each other by providing a standard architecture.

These Recommended Practices are intended for light, medium, and heavy duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to: on and off highway trucks and their trailers; construction equipment; and agricultural equipment and implements. The purpose of these Recommended Practices is to provide an open interconnect system for electronic systems. It is the intention of these Recommended Practices to allow Electronic Control Units to communicate with each other by providing a standard architecture.

These Recommended Practices are intended for light, medium, and heavy duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to: on and off highway trucks and their trailers; construction equipment; and agricultural equipment and implements. The purpose of these Recommended Practices is to provide an open interconnect system for electronic systems. It is the intention of these Recommended Practices to allow Electronic Control Units to communicate with each other by providing a standard architecture.

These Recommended Practices are intended for light, medium, and heavy duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to: on and off highway trucks and their trailers; construction equipment; and agricultural equipment and implements. The purpose of these Recommended Practices is to provide an open interconnect system for electronic systems. It is the intention of these Recommended Practices to allow Electronic Control Units to communicate with each other by providing a standard architecture.

These Recommended Practices are intended for light, medium, and heavy duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to: on and off highway trucks and their trailers; construction equipment; and agricultural equipment and implements. The purpose of these Recommended Practices is to provide an open interconnect system for electronic systems. It is the intention of these Recommended Practices to allow Electronic Control Units to communicate with each other by providing a standard architecture.

This top level document describes the network in general, the OSI layering structure, the subordinate document structure, and provides control for all preassigned values and names. The Appendices of this document lists all SPN assignments, PGN assignments, NAME Function assignments, Manufacturer Code assignments, and Preferred Address assignments. All SPN and PGN assignments are listed in this document even though the complete definition details might be recorded in another standard. The SPN and PGN listings in this document identify the standard document that either contains the definition details or is associated with the identifier.

This top level document describes the network in general, the OSI layering structure, the subordinate document structure, and provides control for all preassigned values and names. The Appendices of this document lists all SPN assignments, PGN assignments, NAME Function assignments, Manufacturer Code assignments, and Preferred Address assignments. All SPN and PGN assignments are listed in this document even though the complete definition details might be recorded in another standard. The SPN and PGN listings in this document identify the standard document that either contains the definition details or is associated with the identifier.

This document describes the collection of IUMPR data required by the Heavy Duty On-Board Diagnostic regulation 13 CCR 1971.1 (l)(2.3.3), using SAE J1939-defined messages incorporated in a suite of software functions.