Refine Your Search

Topic

Search Results

Journal Article

Localization and Perception for Control and Decision-Making of a Low-Speed Autonomous Shuttle in a Campus Pilot Deployment

2018-11-12
Abstract Future SAE Level 4 and Level 5 autonomous vehicles (AV) will require novel applications of localization, perception, control, and artificial intelligence technology in order to offer innovative and disruptive solutions to current mobility problems. This article concentrates on low-speed autonomous shuttles that are transitioning from being tested in limited traffic, dedicated routes to being deployed as SAE Level 4 automated driving vehicles in urban environments like college campuses and outdoor shopping centers within smart cities. The Ohio State University has designated a small segment in an underserved area of the campus as an initial AV pilot test route for the deployment of low-speed autonomous shuttles. This article presents initial results of ongoing work on developing solutions to the localization and perception challenges of this planned pilot deployment.
Journal Article

Literature Review on the Effects of Organometallic Fuel Additives in Gasoline and Diesel Fuels

2018-04-18
Abstract A literature review was conducted and fuel survey data were obtained to identify the use of metallic fuel additives (MFAs) within market fuels and determine their effects on engines, exhaust systems, and vehicle performance. The primary focus was on modern vehicles equipped with on-board diagnostic (OBD) systems and advanced emissions control systems. For gasoline, this includes vehicles categorized as National Low Emission Vehicles (NLEV) and Tier 2 or beyond in the U.S., and Euro-3 through Euro-6 in the EU. For diesel, this includes engines/vehicles with original equipment manufacturer (OEM)-equipped oxidation catalysts and diesel particulate filters. The literature search of peer-reviewed papers and other publicly available articles returned over 100 items relevant to the use of organometallic fuel additives, but did not provide significant evidence of widespread use of MFAs in either gasoline or diesel fuels.
Journal Article

An Adaptive Neuro-Fuzzy Inference System (ANFIS) Based Model for the Temperature Prediction of Lithium-Ion Power Batteries

2018-08-14
Abstract Li-ion batteries have been widely applied in the areas of personal electronic devices, stationary energy storage system and electric vehicles due to their high energy/power density, low self-discharge rate and long cycle life etc. For the better designs of both the battery cells and their thermal management systems, various numerical approaches have been proposed to investigate the thermal performance of power batteries. Without the requirement of detailed physical and thermal parameters of batteries, this article proposed a data-driven model using the adaptive neuro-fuzzy inference system (ANFIS) to predict the battery temperature with the inputs of ambient temperature, current and state of charge. Thermal response of a Li-ion battery module was experimentally evaluated under various conditions (i.e. ambient temperature of 0, 5, 10, 15 and 20 °C, and current rate of C/2, 1C and 2C) to acquire the necessary data sets for model development and validation.
Journal Article

Electrifying Long-Haul Freight—Part II: Assessment of the Battery Capacity

2019-01-25
Abstract Recently, electric heavy-duty tractor-trailers (EHDTTs) have assumed significance as they present an immediate solution to decarbonize the transportation sector. Hence, to illustrate the economic viability of electrifying the freight industry, a detailed numerical model to estimate the battery capacity for an EHDTT is proposed for a route between Washington, DC, to Knoxville, TN. This model incorporates the effects of the terrain, climate, vehicular forces, auxiliary loads, and payload in order to select the appropriate motor and optimize the battery capacity. Additionally, current and near-future battery chemistries are simulated in the model. Along with equations describing vehicular forces based on Newton’s second law of motion, the model utilizes the Hausmann and Depcik correlation to estimate the losses caused by the capacity offset of the batteries. Here, a Newton-Raphson iterative scheme determines the minimum battery capacity for the required state of charge.
Journal Article

Performance Margin for Geometric Road Design

2018-08-08
Abstract Although several methods exist for measuring the performance capability of a vehicle, many require detailed knowledge of the forces acting at each tire contact patch or do not account for both the vehicle dynamics and the road geometry. A simple vehicle model is proposed to estimate the upper limit of performance capability for a given operating condition (the Performance Envelope) based on the Effective Friction and the road geometry (slope and cross-slope). The Effective Friction accounts for both the vehicle dynamics and road surface properties and is estimated, through simulation or experimentation, using two standard vehicle dynamics tests: constant radius cornering and straight-line braking. The Performance Margin is defined as the additional performance capability available before the vehicle reaches the Performance Envelope, both represented in the intuitive units of gravity.
Journal Article

Application of a New Method for Comparing the Overall Energy Consumption of Different Automotive Thermal Management Systems

2018-10-03
Abstract This article applies a new method for the evaluation and estimation of real-life energy consumption of two different thermal management systems based on driving behavior in the course of the day. Recent attempts to find energy-efficient thermal management systems for electric and plug-in hybrid electric vehicles have led to using secondary loop systems as an alternative approach for meeting dynamic heating and cooling demands and reducing refrigerant charge. However, the additional layer of thermal resistance, which influences the system’s transient behavior as well as passenger compartment comfort during cool-down or heat-up, makes it difficult to estimate the annual energy consumption. In this article, the overall energy consumption of a conventional and a secondary loop system is compared using a new method for describing actual customers’ driving behavior in the course of the day.
Journal Article

Selection of Reference Flux Linkage for Direct Torque Control Based Induction Motor Drive in Electric Vehicle Applications

2019-04-08
Abstract The surge in economic activities, in the developing nations, has resulted in rapid expansion of urban centres. This expansion of cities has caused a rapid increase in vehicular traffic, which in turn has caused deterioration of air quality. To overcome the problem of unprecedented air pollution, the governments worldwide have framed policies for faster adoption of electric vehicles. One of the major challenges faced is the development of low- cost drive for these vehicles and keeping the imports to a minimum. As a result of this, the trend is to move away from the permanent magnet-based motor technology and to use induction motor-based drivetrain. For the induction motors to be successful in electric vehicle drivetrain application, it is important to have a robust speed control algorithm. This work aims at adapting a direct torque control technique for induction motor’s speed control.
Journal Article

Vehicle Aerodynamic Optimization: On a Combination of Adjoint Method and Efficient Global Optimization Algorithm

2019-04-26
Abstract This article presents a workflow for aerodynamic optimization of vehicles that for the first time combines the adjoint method and the efficient global optimization (EGO) algorithm in order to take advantage of both the gradient-based and gradient-free methods for aerodynamic optimization problems. In the workflow, the adjoint method is first applied to locate the sensitive surface regions of the baseline vehicle with respect to the objective functions and define a proper design space with reasonable design variables. Then the EGO algorithm is applied to search for the optimal site in the design space based on the expected improvement (EI) function. Such workflow has been applied to minimize the aerodynamic drag for a mass-produced electric vehicle. With the help of STAR-CCM+ and its adjoint solver, sensitive surface regions with respect to the aerodynamic drag are first located on the vehicle.
Journal Article

Optimal Electric Vehicle Design Tool Using Genetic Algorithms

2018-04-18
Abstract The proposed approach present the development of a computer tool that allows, in the first phase, the modeling of the electric vehicle power chain. This phase is based on a library developed under the Matlab-Simulink simulation environment. This library contains all the components of the power chain; it offers the selection of the desired configuration of each component. In the second phase, the tool solves the autonomy optimization problem. This problem is resolved by a program based on genetic algorithms. This program permits to optimize the configuration parameters maximizing the vehicle autonomy of the chosen chain. This tool is based on a graphical interface developed under the Matlab simulation environment.
Journal Article

On WTW and TTW Specific Energy Consumption and CO2 Emissions of Conventional, Series Hybrid and Fully Electric Buses

2018-04-17
Abstract Making use of a specifically designed dynamical vehicle model, the authors here presented the results of an activity for the evaluation of energy consumption and CO2 emissions of buses for urban applications. Both conventional and innovative (series hybrid, and fully electric) vehicles were considered to obtain interesting comparative conclusions. The derived tool was used to simulate the dynamical behaviour of these vehicles on a number of kinematic profiles measured during real buses operation in different contexts, varying from really congested city centre routes to fast-lane operated services. It was so possible to evaluate the energetic performances of those buses on a Tank-to-Wheel (TTW) basis.
Journal Article

Investigation of a Six-Phase Interior Permanent Magnet Synchronous Machine for Integrated Charging and Propulsion in EVs

2018-04-17
Abstract Merits such as reduced weight, overall and operational costs of the electric vehicle (EV) while providing level 3 charging capability, are propelling research on integrated charging (IC) technology for EVs. Since the same interior permanent magnet synchronous machine (IPMSM) is used during IC and traction conditions, it is important to understand the behavior of the machine during these conditions and optimally design the machine. Hence, firstly, this paper presents a case study on performance of a laboratory 3-phase IPMSM under IC and traction conditions. Thereafter, understanding the challenges such as low magnet operating point, losses and torque oscillation in 3-phase IPMSM during IC, a 6-phase IPMSM with an unconventional configuration is investigated to yield traction characteristics like that of the 3-phase IPMSM and mitigate challenges during IC. In the process, mathematical model of the 6-phase IPMSM is developed employing the dq-axis theory.
Journal Article

A Bibliographical Review of Electrical Vehicles (xEVs) Standards

2018-04-18
Abstract This work puts presents an all-inclusive state of the art bibliographical review of all categories of electrified transportation (xEVs) standards, issued by the most important standardization organizations. Firstly, the current status for the standards by major organizations is presented followed by the graphical representation of the number of standards issued. The review then takes into consideration the interpretation of the xEVs standards developed by all the major standardization organizations across the globe. The standards are differentiated categorically to deliver a coherent view of the current status followed by the explanation of the core of these standards. The ISO, IEC, SAE, IEEE, UL, ESO, NTCAS, JARI, JIS and ARAI electrified transportation vehicles xEV Standards from USA, Europe, Japan, China and India were evaluated. A total approximated of 283 standards in the area have been issued.
Journal Article

Design, Analysis, and Optimization of a Multi-Speed Powertrain for Class-7 Electric Trucks

2018-04-17
Abstract The development, analysis, and optimization of battery electric class-7 heavy-duty trucks equipped with multi-speed transmissions are discussed in this paper. The designs of five new traction motors-fractional-slot, concentrated winding machines-are proposed for use in heavy-duty electric trucks. The procedure for gear-ratio range selection is outlined and ranges of gear ratios for three-to six-speed transmission powertrains are calculated for each of the proposed electric traction motors. The simulation and gear-ratio optimization tasks for class-7 battery electric trucks are formulated. The energy consumption of the e-truck with the twenty possible powertrain combinations is minimized over the four driving cycles and the most efficient powertrain layouts that meet the performance criteria are recommended.
Journal Article

Multi-Attribute, System-Level Design Process for Automotive Powertrain Electric Drives: An Integrated Approach

2018-06-05
Abstract This article presents an electric drive powertrain design and virtual integration methodology in the context of electric vehicle systems. In the first stage, using the Model-Based System Engineering paradigm, the electric vehicle performance requirements are translated into electric drive target specifications using a system-level vehicle model. Subsequently, a functional electric drive subsystem-level model is developed based on magnetic co-energy and iron losses data obtained from a reference electric machine design. The functional electric drive model is scaled in order to meet the requested specifications, and it is coupled with different 1D (i.e. lumped-parameter) multi-physics sub-models that are later integrated into the electric vehicle system-level model. At the electric drive level the torque ripple and Noise, Vibration and Harshness characteristics are analyzed.
Journal Article

Electric Vehicle with Multi-Speed Transmission: A Review on Performances and Complexities

2018-12-04
Abstract Electric vehicles (EVs) with multi-speed transmission offer improved performances compared to those with single speed transmission system in terms of top speed, fast acceleration, or gradeability along with driving range. In this study, relevant literature is extensively analyzed to explore the performances and associated complexities with multi-speed automatic manual/mechanical transmission (AMT) system in EVs. In EV powertrain, the only torque generator component is electric motor, which is not equally efficient throughout wider speed range. To the other end, vehicles need to run at different speeds in diverse driving conditions. The study shows that multi-speed transmission system enables efficient operation of electric motor by choosing an appropriate gear at different driving torque-speed demands and thus contributes to achieve desired vehicle performances at minimum energy consumption.
Journal Article

Optimization Control for 4WIS Electric Vehicle Based on the Coincidence Degree of Wheel Steering Centers

2018-07-24
Abstract The steering centers of four wheels for passenger car do not coincide, which may result in tire wear and the unharmoniously movement of the vehicle. In this article, an optimization control method for Four Wheel Independent Steering (4WIS) electric vehicle based on the coincidence degree of steering centers is proposed, to improve the driving performance. The nonlinear vehicle model of the four-wheel independent steering vehicle is established, and the formula of the wheel steering center is derived. The coincidence degree of wheel steering centers is defined as the evaluation index, to describe and evaluate the performance of the coordination for wheels’ movement. Meanwhile, the structure design of 4WIS system and the establishment of Direct-Current (DC) steering motor model are carried out, and the Model Predictive Control (MPC) controller for steering actuator is designed.
Journal Article

A Robust Wheel Slip Control Design with Radius Dynamics Observer for EV

2018-06-18
Abstract In order to improve the safety and dynamic performance of electric vehicles equipped with four in-wheel electric motors, and prevent the wheels from locking or slipping when braking or accelerating, a new longitudinal control strategy which combines ASR traction and ABS braking control is proposed using an observation algorithm of effective radius for four wheel of electric vehicle. Using the electric motor torques as the unique actuator signal sources, this combined ASR/ABS can act as acceleration slip regulation (ASR) by preventing the wheels from slipping during acceleration and as an antilock braking system (ABS) by preventing the wheels from getting locked during braking. A variation of effective radius of the wheel’s tire can have an incidence on the longitudinal and lateral control.
Journal Article

Integrated Driving and Braking Control Unit for Electric Bikes

2018-10-04
Abstract In this research, an integrated driving and braking control unit was developed for electric bikes. The unit integrates the driving and braking circuits in a module. Alternate commutation was used to design the driving and braking unit of a customized brushless direct-current hub motor (BLDCHM). The braking torque for the braking section is generated through alternating the duty cycle of the pulse-width-modulated (PWM) commands of the switching elements and phase sequence arrangement of the current conduction loops. The current conduction loops in the motor and switching elements is arranged to adjust the braking torque in a sophisticated way. The integrated design has been successfully tested in a commercialized electric bike with a BLDCHM.
Journal Article

Bench Testing Validation of Wireless Power Transfer up to 7.7kW Based on SAE J2954

2017-10-08
Abstract Wireless Power Transfer (WPT) is presently being applied to consumer electronics in the low-power range and is planned to be commercialized in the high-power range for plug-in and electric vehicles in 2018. There are, however, many technology challenges remaining before widespread implementation of high-power WPT will occur. The SAE Vehicle Wireless Power and Alignment Taskforce published the Technical Information Report J2954 in 2016 to help harmonize the first phase of high-power WPT technology development. SAE J2954 adopts a performance-based approach to standardizing WPT by specifying ground and assembly coils to be used in a test stand (per Z-class) to validate performance, interoperability and safety. The main goal of this SAE J2954 bench testing campaign was to prove interoperability between WPT systems utilizing different coil magnetic topologies for SAE TIR J2954.
Journal Article

Discussion on Charging Control Strategy for Power Battery at Low Temperatures

2017-10-08
Abstract In the case of electric vehicles, due to the charging current limitation of lithium battery at low temperatures (below -20°C), it has been proposed to heat the battery pack up to a suitable temperature range before charging through a liquid-heating plate with PTC. However, at a low state of charge (SOC), there is a question which one could take the place of battery pack to supply power for PTC when heating. So that off-board charger (OFC) has been considered to supply power for PTC in this paper. In order to control the current charging into the battery pack as less as possible at low temperatures, three control schemes of battery management system (BMS) are proposed and compared. Scheme 1: BMS controls the value of charging current request close to the working current of PTC. Scheme 2: BMS controls the value of charging voltage request to reach a state of relative balance. Scheme 3: BMS disconnects the pack from the charger and keeps the connection between PTC and charger.
X