Search Results

Quality in the integrated product team In the early phases of product development, quality must be engineered and managed into the product. Advancing icing detection Engineers are working to develop a capability to detect icing conditions ahead of aircraft using onboard and ground-based remote sensing systems. Testing times Methods for testing aircraft engines have changed dramatically over the years for Rolls-Royce- almost as much as the engines themselves. This is the last installment of a three-part series on aircraft engine testing.

Safeguarding aircraft systems How several systems suppliers, airframers, and researchers have approached the need for increased system safeguards and protection against lightning strikes. One last look back A review of the technology news, discussions, and announcements from the first Aerospace Congress & Exhibition held September 10-13 in Seattle, WA. Powering unmanned aircraft Pratt & Whitney Canada is developing and testing a commercial turbofan engine derivative for high-altitude unmanned air vehicle applications. 737-800 winglet integration A joint venture between Boeing and Aviation Partners Inc. is involved in developing a performance improvement for in-service aircraft.

The French resurgence Despite facing great domestic political challenges, resulting from the growing national debt level and a general financial malaise in the Euro-zone countries within the EU, successive French governments have remained highly supportive of their aerospace sector.

Reverse Engineering the Boeing E-3 Sentry's Secondary Flight Controls Vanadium - A Green Metal Critical to Aerospace and Clean Energy Thrust in Space - The Nuances of Thruster Valve Design 3D Printing Aerodynamic Improvements Cryogenic-Capable Isolators Improve the Performance of Millimeter-Wave Systems by Lowering Noise Levels Detection with Quantum Radar A new radar prototype utilizes quantum entanglement as a method of object detection. Preliminary Development of an Integrated Mobility, Lethality, and Survivability Soldier Performance Testing Platform Developing a methodology that incorporates objective measures of performance and is sensitive to changes in soldier-system equipment could help guide equipment manufacturers during product development and acquisition. Bore Elevation and Azimuth Measurement System (Beams) Newly developed laser apparatus verifies that the pointing accuracy requirement of a weapon's fire control system is met.

Radiation-Tolerant FPGAs Solve Spacecraft Design Challenges Thermal Management for Directed Energy Weapons New Diamond Super-Material Enhances Aircraft Survivability Development of a Secure Private Neural Network Capability From DC to Daylight - How Innovations in Microwave Absorbers Shield the Warfighter Army Advances Materials for New Low-Profile Antenna Directed-Energy System to Defeat Small Unmanned Aircraft System Swarms New weapons technology is needed to combat the proliferation of small unmanned aircraft systems (sUAS), miniaturization of sensor technology, and advancement of UAS swarm logic that will enable swarms of sUAS to threaten US airbases by the 2025 timeframe.

Why are Aerospace & Defense Companies Embracing Additive Manufacturing? Simplifying Power Design with Modular Architectures The Role of DevSecOps in Modern Edge Systems Making Machines Curious Designing Multi-Channel Microwave Radio Systems Using Optical Interconnects Solving Military Satellite, Radar and 5G Communications Challenges with GaN-on-SiC MMIC Power Amplifiers Advanced Airborne Defensive Laser for Incorporation on Strike Fighter Aircraft A technical and operational analysis of an airborne "hard-kill" Ytterbium fiber laser-based anti-missile system for use on strike fighters. Additive Manufacturing Utilizing a Novel In-Line Mixing System for Design of Functionally Graded Ceramic Composites Exploring the development of a direct ink writing system with multimaterial and in-line mixing capabilities for printing inks composed of high solids-loaded ceramic particulate suspensions.

Artificial Intelligence in the Battlespace Key Considerations for a New Way of Fighting War Machining Beryllium Electrified Propulsion for Aerospace Where to Start The Future of Managing Mission-Critical Systems Improving Battlefield Connectivity for the Modern Warfighter How to Test a Cognitive EW System Molded RF Materials for Hypersonic Sensors and Seekers AUVSI XPONENTIAL Multimode Optical Fiber Sensing Although the vast majority of fiber optic strain sensors use single mode fiber, multimode fiber has a higher nonlinear threshold that enables higher light levels and lower noise, while the diversity of spatial modes can be used to develop sensors that are inherently immune to signal fading. Autonomous and Resilient Management of All-Source Sensors for Navigation Assurance As the number and type of sensors informing a system increases, so does the probability of corrupting the system with sensor modeling errors, signal interference, and undetected faults.

Top technologies for 2004 "Aerospace Engineering's" annual review of the technologies chosen by its readers to be the most significant. Tooling around in the computer Much of the latest software is very capable, but learning how to get the best out of it, and getting the business processes right, is the key to success.

Giving ice the boot Atmospheric icing was for many years one of the majoy threats to aircraft safety- and it potentially still is. Researchers at Dunlop Aviation Ice Protection and Composites continue their development of deicing and anti-icing technologies. The art of wing assembly Airbus Industries investigates new technologies and techniques for improving quality and reducing cost of its wing box assemblies. Affordable engines for small aircraft A look into the new technologies developed for small-aircraft engines as extensions to the cooperative agreements under the NASA General Aviation Propulsion program conclude.

Powering Better Battlefield Drones Using Low-Frequency Broadband Sonar on UUVs Experimenting in Realistic Environments Gets NewTechnology to Warfighters Designing Rugged SWaP-Optimized MOSA Solutions for UUVs Does Your UAV Program Need a Transponder? Understanding the Requirements and Guidelines Developing New Anti-Drone Radar Technology Deceiving the Enemy: These Are the Drones You Are Looking For By developing UAVs for physical deception roles to shape an adversary's ability to visually observe and orient to situations, the US military can decrease risk to air and ground combatants during mission execution by causing adversaries to expend resources, delay their reactions, or react incorrectly to tactical situations.

Empowering Soldiers Through ISPDS Dispensable Gels vs Gap Filler Pads An Analysis of Thermal Management Materials Electronic Warfare Vying for Control of the Electromagnetic Spectrum More Bang for the Buck A New Design and Manufacturing Method for Deep Penetrating Bomb Cases A Comprehensive Way to Use Bonding to Improve RF Performance of Low Noise Amplifiers Army and Universities Deploy New Warfighter Communication Technology Radiation Effects on Electronics in Aligned Carbon Nanotube Technology (RadCNT) Characterizing the fundamental mechanisms and charge transport phenomena governing the interactions between ionizing and non-ionizing radiation with carbon-based (nanotube and graphene) field-effect transistors (FETs) devices and integrated circuits (ICs).

Going direct in manufacturing Prototyping transitions from one-off components to flight-ready hardware. Traveling light, traveling easy Airplane manufacturers have always tried to avoid unnecessary weight- and today's materials and design tactics combine for stronger structures with less weight. making flying safer Technology is applied to new avionics and ground-based systems to make air operations, military as well as civil, far safer than ever before. Innovative Thinking 101 West Virginia University professor Dr. James E. Smith issues a call for innovation as one of the central themes of his term as SAE's 2009 President.

Explosion suppressant arresting foam Technological refinements over three decades have enabled a family of polyerethane foams to aid in the prevention of catastrophic explosions caused by electrical arching, lightning strikes, and static electrical discharge. Improving SA via HUD Engineers from Honeywell and BAE Systems address the saftety and avionics issues inherent in the anticipated increase in air traffic.

Introducing Neil Schilke, SAE President for 2001 General Motors' former top engineer brings a systems engineering mentality, along with high expectations, to the SAE presidency. ISS beginning to shape up Since the addition of the Zvezda Service Module, assembly activities on the International Space Station have been ramped up to meet the program's completion goal of 2006. Maintaining the space station International Space Station partners will face many challenges once assembly is complete- one of which is the maintenance and upkeep of this new satellite. E-commerce taking off Still in its infancy, e-commerce is expected to have a major impact on aviation companies from all segments of the supply chain.

New Engineering Software Solutions Several software products will begin the new millennium with a few new enhancements along with others that continue to provide good functionality and capability to engineers. Building a space station In the wake of recent delays in the launch of the Russian Service Module, the International Space Station partners diligently continue with assembly plans for this massive satellite. As the station is prepared for its first crew, "Aerospace Engineering" looks ahead to the remaining assembly tasks planned for this year. Introducing Dr. Rodica A. Baranescu, SAE President for the year 2000 Had her father gotten his way, Rodica Baranescu would now have a successful physician's practice and enough spare time to entertain audiences with her musical talents. Imagine his reaction when a young Rodica declared that what she was more interested in doing when she grew up was ballooning over Africa.

Wanted: aerospace engineers There are many different viewpoints on the state of engineering employment in the aerospace industry. "Aerospace Engineering" editors spoke with airframers, suppliers, and academics to get their perspectives on recruiting and retaining engineering talent. Understanding the shape-variable fowler flap DaimlerChrysler Aerospace and the German Aerospace Center have begun studying the concept of a shape-variable fowler flap for an Airbus transport aircraft such as the A340. Thin-film coatings technology NIST's Materials Science and Engineering Laboratory continues its research to gain better understanding of the mechanical properties of thin-film aerospace applications. Managing knowledge SDRC provides a customized product knowledge management solution for the aerospace industry.

Focusing on the process Lean practices aim at changing the way managers, engineers, and assembly workers view their jobs. This first installment in a two-part series on lean manufacturing focuses on the principles that make up this production philosophy. Smoothing the path to laminar flow control Researchers at Cranfield College of Aeronautics are studying laminar flow control technology with the particular target of enhancing Airbus aircraft technology for the 21st century. Maintaining electrical protection on the 777 A scheduled maintenance program is essential for aircraft protection against high-intensity radiated fields and lightning.

Showing how it's done Engineers are using software to better manage product development data, and applying tools to a new class of problems. NASA goes deep The agency's new long-term space exploration program starts with a return to the moon and will ultimately enable future exploration of Mars and other solar system destinations. Farnborough preview In an event that happens just once every two years, bringing the multitudes together, it is important to get as much technology as possible into the open and to find solutions to hard problems. Seats under crash loading The FAA and academia have conducted aircraft seat drop tests to compare and contrast passenger crash protection. A fluid approach Aerospace engineers have started using CFD software earlier and earlier in the design process.

Electrifying Aviation: The Path to Decarbonizing the Skies /Electric aviation mirrors the early stages of the electric vehicle revolution Advances in Military Avionics Technologies Create New Challenges for RF Test and Measurement Plasma Electrolytic Oxidation: The Future of Lightweight Designs in Aerospace and Defense Advanced RF Simulation Reduces Cost and Schedule Risk Assure 5G NTN Performance Before Launch In the complex and quickly evolving 5G NTN landscape, simulating, emulating, and evaluating RF systems boosts mission success. Qualification of Multi-Channel Direction Finding Radar Receivers in The Lab Bullet Impact Testing of Ammunition and Explosives at Picatinny Arsenal A bullet impact (BI) test for evaluating the response of energetically loaded items has been established at the U.S. Army Combat Capabilities Command (DEVCOM) Armaments Center (AC) Explosive Development Facility.

Full throttle for engine solutions Powering aircraft from Mach 2 fighters to tiny hovering UAVs, military engine technology is now operating on a very broad front. Design and production flexibility together with reduced in-service costs are priorities. To the breaking point Test engineers use new rigs and data-acquisition equipment on the latest generation of pneumatics, engines, and airframes. PCs move into the cockpit Pilot training is getting a bit less expensive with the introduction of more portable flight simulations.