Search Results

Making sense on sensors AutoDrive Challenge team from North Carolina A&T State University gets the most out of its few sensors. Victory at last The first Formula SAE win of Polytechnique Montreal: why keeping it simple and being prepared was the key. Keeping it light Gram by gram, students at Ningxia University carve weight off their SAE Aero Design East plane to win the 2019 competition.

The big engine that could With the stringent EPA 2015 regulations on large diesel engines for locomotive, marine, and stationary generator applications, the need for NOx reduction via urea SCR catalyst arises given the proven performance of urea SCR. Monitoring hydraulics Component producers and vehicle service providers offer their views of hydraulic diagnostics as the industry moves toward real-time, intelligent health monitoring, predictive failure software algorithms, and wireless notification. Engine management expands from minute movements to full vehicle Electronic controls grow in complexity as engine designers extend their scope to include hydraulics.

Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.

Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks Small engine landscape Kubota engineers developed new small-displacement engines that adopt a common-rail system while optimizing the combustion system and injection characteristics. Sensitive to safety A growing number of digital sensors are among the tools being used to make sure failures are rare and injuries are even more infrequent.

Editorial The consolidation plot thickens The Navigator As the world turns to C-V2X, Europe picks WiFi Complexity of Autonomous-Systems Simulation, Validation Soars to the Clouds Scalable, cloud-based architectures are gaining greater acceptance for simulating and testing the myriad development aspects of automated driving. Connectivity Solutions for AVs The promises of fully connected autonomous vehicles are great, but so are the challenges. What M&E Can Teach the AV Industry About Data Media & entertainment offers important learnings on data retention, management, scalability and security. The Rodney Dangerfield of Automated-Driving Sensors Radar and lidar get all the attention, but Inertial Measurement Units are the backbone of sensor fusion. Suppliers are scrambling to make IMUs more accurate-and much less expensive. The Sense-itive Side of Autonomous Vehicles BASF is exploring how specific materials-and even paint colors and finishes-can improve the capabilities of AV sensors.

Steel sector aids sustainability Volvo Group partners with SSAB on 'green steel' for off-highway machines and with Ovako for access to fossil-free hydrogen. CV autonomy: Picking the 'low-hanging fruit' Increasingly automated commercial vehicles offer challenges and opportunities in simulation, data management and standardization. Developing EV-specific lubes As electric-vehicle technology accelerates, dedicated e-fluids are necessary to maintain proper levels of drivetrain performance. Editorial Real-world emphasis on electric Mahle, Liebherr develop active pre-chamber for hydrogen ICE ABS ramps up commercial-vehicle battery-pack assembly Navistar updates A26 engine, improves FE by 4% Bosch debuts new CV-specific electric motor and inverter Western Star adds 'weight sensitive' 47X to vocational lineup Hyundai CE launches next-gen electric forklift Q&A Mahle's Laurent Art discusses thermal-management challenges, solutions for battery and fuel-cell electric commercial vehicles.

Material selection for battery enclosures Mass reduction is the main reason BEV makers choose aluminum for battery enclosures, but cost and thermal requirements favor steel and polymer composites. Startup targets medium-duty EVs Atlis Motors purpose-engineers nearly all the vital components for an electric pickup and platform capable of spanning several market segments. High-voltage hybrids FEV engineers evaluate 48V and high-voltage parallel hybrid architectures for Class 6-7 commercial vehicles. Certain setups show more promise than others. Hemphill's mission: Support the innovation ecosystem Schaeffler America CTO Jeff Hemphill brings impressive technical chops and well-honed communication skills to his new role as 2021 SAE International president.

Editorial As Argo taps out, the AV industry resets The Navigator 2022 a mixed bag for the AV sector Volvo's New Sensor Sweet A Luminar Iris lidar in the 2024 EX90 is engineered to enhance both automated driving and safety. Inner Visions Automated-driving and ADAS functionalities continue to influence some of the latest cabin safety and materials trends. The Olfactory Factor in AV Interiors Aryballe Technology's unique sensors-on-a-chip solution aims to end the subjectivity of the human nose while neutralizing vehicle cabin odors. AV Life After Argo AI Every new industry sector goes through a consolidation process where the strongest survive, and so it is with automated and autonomous driving technologies. Robotic ADAS Testing Bridges the Sim Gap ASI's Swarming technology allows collision-avoidance and other tests at high speeds on vehicles that human drivers find hard to match. New Tools & Technologies

Operator station innovations Off-highway engineers work hard to provide comfort, ease of operation, and reliability to users. As an added challenge, they must design for operators who can spend an entire day working hard in their cab. Designing online Major developments in internet-based technologies are profoundly changing the engineering/design process, revolutionizing the way OEMs and suppliers do business, and speeding the industry's time-to-market. FEA simulation of an electrohydraulic system Researchers from the Milwaukee School of Engineering provide an accurate model of a typical magentic actuator Predicting injury in forklift upsets Researchers from the Biomechanics Institute present test results that demonstrate operators can prevent ejection and injury from a forklift if they are lap-belted and have either a winged seat or hip restraint.

Simulating cab noise and vibration Researchers at kubota and Doshisha University have established a prediction method for the engine-idling state using statistical energy analysis. Manufacturing cost estimating Caterpillar's ACT Group uses Micro Estimating Systems' computer-aided estimating program to increase efficiency and decrease operating costs in powder-metal part manufacturing. In search of greener pastures Agricultural OEMs are looking at the total life cycle to develop more environmentally conscious products and processes. Emissions and lubrication More stringent diesel emissions legislation is placing an increased burden on engine lubricant in the form of soot loading.

Huge loader: huge tire Tire technology retains a direct controlling influence over wheeled machine mass and application requirements. Getting engineers off the streets Hands-on experience and career-long training are widely employed to equip engineers with a skill set more varied than just technical know-how. Driving blind Industry, government, and academia have their eyes on autonomous off-highway vehicles. Introducing Duane Tiede, SAE President for 2004 With over 35 years of diverse experience in the off-highway industry, Duane Tiede steps up to a new challenge-leading SAE into its 100th year.

Hydrogen possibilities Using hydrogen in an internal-combustion engine application requires not only a custom-engineered combustion concept, but also optimized operation strategies. Nets catch on Engineers have been slow to adopt networks, but that is changing quickly as electronically controlled engines take hold. Hydraulic matters There is much potential for gain for everyone if OEMs and suppliers work together early in terms of hydraulic system design. Asia hot on new cooling technology Not tied as much to aluminum as is the West, china and Russia are moving fast toward widespread use of copper and brass for radiators. Build, test, teview, and improve SAE 100 Future Look; Frank Perna, Chairman and CEo of MSC. Software writes about his experience in vehicle engineering, testing, and management positions.

Shrinking hydraulics The push to conserve fuel and reduce emissions is prompting major changes in system design. Aftertreatment temperature control Regeneration of a DPF burns off soot, but also raises exhaust gas temperature. Speed thrills: doing more tests in less time Quicker data gathering, simulation keep quality high despite time crunch. Green engineering The quest to alleviate environmental and efficiency pressures turns up 'small' material solutions with big benefits. A global forum Cummins executives lay the groundwork for a lively and informative discussion at this year's Commercial Vehicle Engineering Congress & Exhibition.

In search of the perfect burn The simultaneous download pressures on NOx and PM continue to make research into higher injection pressures and alternative combustion solutions such as homogenous-charge compression ignition attractive. One way to stop a train A new self-energizing electrohydraulic brake offers the advantages of hydraulic brake actuation without the disadvantages of a centralized hydraulic power supply. A model combustion: from art to science Analysis tools, advanced hardware provide insight into combustion process, refining the cylinder's 'big bang.' The datalinked vehicle In the fields and on the job site with GPS.

Engine electronics come of age Changes in global standards, combined with engineering know-how, have resulted in a new generation of clean, quiet, and efficient engines. Operators are rolling in the chips Microprocessors and sensors are being combined to monitor the way that equipment is being used, then help operators to perform better in that environment. Gaining weight Perkins' influence in the off-highway industry grows as it evolves its global engine lines and expands its presence in the U.S. What's new at CONEXPO-CON/AGG, Part 2 of 2 A preview of some of the products and technologies that will be displayed at this year's event, scheduled March 15-19 in Las Vegas, NV. Engineering a career Off-highway companies are challenged not only by the ever-changing technology landscape, but also by finding the engineering talent to help them succeed in it.

Designing out emissions Researchers from Michigan Technological University designed and tested a single-cylinder, four-stroke engine with electronic fuel injection and catalytic exhaust treatment for a snowmobile application. Networking to extend equipment life Equipment developers are using local area networks to gather specific usage and maintenance data in response to the needs of off-highway equipment owners and leasing companies to maximize investments. CAE goes off-highway A look at how manufacturers are saving time and improving quality by using computer simulation. Engineering the first 50-ton ADT While it could be said that the articulated frame truck is now a mature concept, Bell Equipment moved the goal posts by redefining both the weight class and application range for this versatile machine.

A quiet revolution Optimizing design, while minimizing NVH, in off-highway equipment and systems. Inferential sensing Engineers propose an onboard electronics hardware and software architecture that can deliver condition-based maintenance solutions in a low-cost platform. Lightweight but heavy duty A look at the design, analysis, testing, and application engineering performed to develop a selectively reinforced brake drum made of aluminum metal matrix composite. Shifting gears smoothly Ric Kleine, a 30-year veteran of Cummins Inc. and former SAE Commercial Vehicle VP, seeks continuity over change as he moves into SAE's driver's seat.

Bridging the power gap An alliance between Cummins and Komatsu provides an intriguing prospect to the industrial engine market with the new QSK78 industrial engine. Large eddy simulation in hydraulic valves Cavitation in hydraulic spool valaves involves large-scale vortical structures in an unsteady submerged jet. According to engineers from Purdue University, curent CFD approaches do not accurately predict these unsteady vortices, nor do they properly account for bubble-dynamics/flow-structure interactions. Proving heavy-vehicle performance The Nevada Automotive Test Center and Mechanical Dynamics joined forces to redesign and improve the drivetrain, frame, steering, and other subsystems of a heavy-duty military-vehicle for the USMC. Tying it all together GPS. Engine diagnostics. Wireless communications. So much technology. So many voices. Is it a chorus of the Tower of Babel?

Simulating air-conditioning performance A computer program developed by Modine Climate Systems and Modelogics helps determine and optimize air-conditioning system performance. Reduced mass haul-truck design concepts Liebherr Mining trucks adopted a reduced structural mass approach to convert unladen weight directly into payload, while simultaneously incorporating state-of-the-art driveline technology. Optimizing a tractor frame for improved cabin NVH To address an aging agricultural workforce and modern ergonomic guidelines, researchers at Doshisha University and Kubota modeled medium- and large-sized agricultural tractors to reduce vibration and noise and increase comfort. Applying 3d-CAD to turbocharger development Ishkawajima-Harima Heavy Industries has developed a 3d-CAD system for turbochargers. satisfying requirements for digital mockup development.

Making sense of engines Heavy-duty equipment is known for its ruggedness in harsh environments, but vehicles are not neglecting their sensitive side. The world's fastest digger gets closer JCB's Dieselmax goes 350 mph and teaches engineers much about engine capability, extreme testing, and program management. The whole system, and nothing but the system Properly implemented, an electrohydraulic system can add a great deal of automatic control, advanced performance, advanced diagnostics, and remote monitoring to a mobile application. Regenerative hydraulics The use of multiple hydraulic pumps can satisfy the needs of various circuits in off-highway equipment. The gas is greener Biofuels promise to help reduce petroleum cinsumption and CO2 emissions, but much of the potential depends on production and infrastructure investments. Material returns Effective use of materials information is important to engineers in development of parts and components.