Refine Your Search

Topic

Search Results

Standard

Electrical Wiring Systems for Construction, Agricultural, and Off-road Machines

1985-05-01
HISTORICAL
J821_198505
This SAE Recommended Practice applies to off-road, self-propelled work machines defined in SAE J1116 JUN81. Purpose This document is intended as a guide in establishing recommended material specifications and identification of the on-board electrical wiring systems for construction, agricultural, and off-road machines.
Standard

Electrical Propulsion Rotating Equipment - Off-Road Dumper

2013-02-21
CURRENT
J1317_201302
This recommended practice applies to the rotating equipment in the electrical propulsion systems on electrically propelled dumpers. It also applies to the rotating equipment installed on trailers connected to electrically propelled dumpers. The recommended practice does not apply to rotating equipment such as windshield wiper motors, battery charging generators, etc. that may be used on dumpers.
Standard

Electrical Propulsion Control - Off-Road Dumpers

2013-02-21
CURRENT
J1299_201302
This SAE Information Report applies to the control circuits and devices associated with the electrical propulsion system used on electric drive dumpers. Dumper is defined in J/ISO 6165. The document does not apply to auxiliary equipment control systems such as: a Battery charging systems b Engine wiring and control c Monitoring and control circuits not directly affecting the operation of the electric propulsion and retarding system d Lighting e Accessory systems (heating, air conditioning, horns, radios, emergency steering, fire protection, and similar functions).
Standard

Electrical Connector for Auxiliary Starting of Construction,Agricultural, and Off-Road Machinery

2000-07-19
HISTORICAL
J1283_200007
This SAE Standard defines the requirements for a plug and receptacle used in an auxiliary starting system. The connector facilitates the application of supplemental electrical power for starting or charging a machine from another machine or suitable external source. This system provides: proper polarity during connector mating, secure electrical connections, and standard circuit color coding. Purpose This document establishes the connector interface dimensions and performance requirements for the electrical plug and receptacle system and its component parts.
Standard

Electrical Connector for Auxiliary Starting of Construction, Agricultural, and Off-Road Machinery

1980-06-01
HISTORICAL
J1283_198006
This SAE Standard defines the requirements for a plug and receptacle used in an auxiliary starting system. The connector facilitates the application of supplemental electrical power for starting or charging a machine from another machine or suitable external source. This system provides: proper polarity during connector mating, secure electrical connections, and standard circuit color coding. Purpose This document establishes the connector interface dimensions and performance requirements for the electrical plug and receptacle system and its component parts.
Standard

Electrical Connector for Auxiliary Starting of Construction, Agricultural, and Off-Road Machinery

1986-03-01
HISTORICAL
J1283_198603
This SAE Standard defines the requirements for a plug and receptacle used in an auxiliary starting system. The connector facilitates the application of supplemental electrical power for starting or charging a machine from another machine or suitable external source. This system provides: proper polarity during connector mating, secure electrical connections, and standard circuit color coding. Purpose This document establishes the connector interface dimensions and performance requirements for the electrical plug and receptacle system and its component parts.
Standard

Electrical Connector for Auxiliary Starting of Construction, Agricultural, and Off-Road Machinery

2008-05-30
HISTORICAL
J1283_200805
This SAE Standard defines the requirements for a plug and receptacle used in an auxiliary starting system. The connector facilitates the application of supplemental electrical power for starting or charging a machine from another machine or suitable external source. This system provides: proper polarity during connector mating, secure electrical connections, and standard circuit color coding. Purpose This document establishes the connector interface dimensions and performance requirements for the electrical plug and receptacle system and its component parts.
Standard

Electrical Connector for Auxiliary Starting of Construction, Agricultural, and Off-Road Machinery

2011-12-06
CURRENT
J1283_201112
This SAE Standard defines the requirements for a plug and receptacle used in an auxiliary starting system. The connector facilitates the application of supplemental electrical power for starting or charging a machine from another machine or suitable external source. This system provides: proper polarity during connector mating, secure electrical connections, and standard circuit color coding.
Standard

Power Cable Terminals

2013-01-18
CURRENT
J1811_201301
This SAE Standard is intended for light and heavy-duty on-highway trucks and their trailers; and off- road machinery applications as described in SAE J1116. The terminals described in this document are primarily used to connect batteries, cranking motors, solenoids, magnetic switches, and master disconnect switches and power cable assemblies.
Standard

Electrical Grounding Practice

2013-02-21
CURRENT
J1908_201302
This SAE Standard outlines general procedures for the grounding of electrical components in 12- and 24-V systems, intended for light and heavy-duty on-highway trucks and their trailers; and off-road machinery applications as described in SAE J1116.
Standard

Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines

2012-09-13
HISTORICAL
J1614_201209
This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.
Standard

Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines

2010-05-11
HISTORICAL
J1614_201005
This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.8 to 19 mm2 used on construction, agricultural, and general purpose industrial categories of off-road self-propelled work machines as defined in SAE J1116.
Standard

Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines

2018-11-21
CURRENT
J1614_201811
This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.
Standard

Heavy-Duty Electrical Connector Performance Standard

2015-06-04
CURRENT
J2030_201506
This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides environmental test requirements and acceptance criteria for the application of connectors for direct current electrical systems of 50 V or less in the majority of heavy-duty applications typically used in off-highway machinery. Severe applications can require higher test levels, or field-testing on the intended application.
Standard

Heavy-Duty Electrical Connector Performance Standard

2009-06-18
HISTORICAL
J2030_200906
This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides environmental test requirements and acceptance criteria for the application of connectors for direct current electrical systems of 50 V or less in the majority of heavy-duty applications typically used in off-highway machinery. Severe applications may require higher test levels, or field-testing on the intended application.
Standard

Heavy-Duty Electrical Connector Performance Standard

2007-05-07
HISTORICAL
J2030_200705
This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides environmental test requirements and acceptance criteria for the application of connectors for direct current electrical systems of 50 V or less in the majority of heavy-duty applications typically used in off-highway machinery. Severe applications may require higher test levels, or field-testing on the intended application.
Standard

Heavy-Duty Electrical Connector Performance Standard

2002-12-13
HISTORICAL
J2030_200212
This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides environmental test requirements and acceptance criteria for the application of connectors for direct current electrical systems of 50 V or less in the majority of heavy-duty applications typically used in off-highway machinery. Severe applications may require higher test levels, or field-testing on the intended application.
Standard

Electrical Charging Systems for Off-Road Work Machines

2019-05-10
CURRENT
J180_201905
This SAE standard describes alternator physical, performance, and application requirements for heavy-duty electrical charging systems for off-road work machines, including those defined in SAE J1116.
X