Refine Your Search

Search Results

Viewing 1 to 17 of 17
Standard

Motorcycle and Motor Driven Cycle Electrical System Maintenance of Design Voltage

2003-01-09
HISTORICAL
J392_200301
This SAE Recommended Practice pertains to electrical systems of motorcycles both with and without batteries. Purpose This document provides minimum illumination voltage values for all motorcycle classifications as specified in SAE J213 describes test procedures to determine that these voltages are maintained.
Standard

Motorcycle and Motor Driven Cycle Electrical System Maintenance of Design Voltage

1984-05-01
HISTORICAL
J392_198405
This SAE Recommended Practice pertains to electrical systems of motorcycles both with and without batteries. Purpose This document provides minimum illumination voltage values for all motorcycle classifications as specified in SAE J213 describes test procedures to determine that these voltages are maintained.
Standard

Motorcycle and Motor Driven Cycle Electrical System Maintenance of Design Voltage

1969-12-01
HISTORICAL
J392_196912
This SAE Recommended Practice pertains to electrical systems of motorcycles both with and without batteries. Purpose This document provides minimum illumination voltage values for all motorcycle classifications as specified in SAE J213 describes test procedures to determine that these voltages are maintained.
Standard

Motorcycle Stop Lamp Switch

1977-12-01
HISTORICAL
J1167_197712
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
Standard

Motorcycle Stop Lamp Switch

1984-06-01
HISTORICAL
J1167_198406
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
Standard

Motorcycle Stop Lamp Switch

2014-01-06
CURRENT
J1167_201401
This SAE Recommended Practice defines the test conditions, procedures, and performance specifications for 6- and 12-v stop lamp switches intended for use on motorcycles.
Standard

Motorcycle Stop Lamp Switch

2008-05-20
HISTORICAL
J1167_200805
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
Standard

Motorcycle Stop Lamp Switch

1989-06-01
HISTORICAL
J1167_198906
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
Standard

Motorcycle Stop Lamp Switch

1998-07-01
HISTORICAL
J1167_199807
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
Standard

Motorcycle Terminology

2016-10-26
WIP
J3133
The motorcycle terminology presented herein addresses two-wheel single track vehicles, as well as three wheel variants. . Although two-wheeled, single track scooters and mopeds are similar to traditional motorcycles, they have many characteristics which differentiate them from motorcycles, and while some terms will apply, this Terminology addresses motorcycles specifically, unless otherwise noted.
Standard

Measurement of Exhaust Sound Pressure Levels of Stationary On-Highway Motorcycles

2012-11-19
CURRENT
J2825_201211
This SAE Recommended Practice establishes test procedures, test conditions, environment, and instrumentation for determining the exhaust sound pressure levels of stationary motorcycles. These are based on a comprehensive study of a wide variety of on-highway motorcycles, and therefore are intended to be applied to on-highway motorcycles. For off-highway motorcycles, SAE J1287 continues to be the recommended practice.
Standard

Measurement of Exhaust Sound Pressure Levels of Stationary Motorcycles

2008-05-28
HISTORICAL
J1287_200805
This SAE Standard establishes the test procedure, environment, and instrumentation for determining the exhaust sound pressure levels of motorcycles under stationary conditions. Care must be taken not to confuse stationary sound pressure levels with total motorcycle sound pressure levels. This test does not evaluate total motorcycle sound during operation. For this purpose, SAE J331 or SAE J47 is recommended. Any allowable sound limits (dBA) set in relation to SAE J1287 for exhaust sound pressure level should not conflict with the allowable sound limits (dBA) for total sound pressure level per the EPA requirements specified in the US Code of Federal Regulations, 40 Part 205.
Standard

Measurement of Exhaust Sound Pressure Levels of Stationary Motorcycles

2017-04-28
CURRENT
J1287_201704
This SAE Standard establishes the test procedure, environment, and instrumentation for determining the exhaust sound pressure levels of motorcycles under stationary conditions. Since initial publication, it has been successfully applied to regulation and monitoring of sound pressure levels of off-highway vehicles, and that remains its recommended application. Users of SAE J1287 for the purpose of roadside enforcement of sound pressure levels for on-highway motorcycles have reported difficulties with its implementation in that application. In response, SAE J2825 was developed, and is recommended for measurement of exhaust sound pressure levels of stationary on-highway motorcycles. Care must be taken not to confuse stationary sound pressure levels with total motorcycle sound pressure levels. This test does not evaluate total motorcycle sound during operation. For this purpose, SAE J331 or SAE J47 is recommended.
Standard

Motorcycle and Motor Driven Cycle Electrical System Maintenance of Design Voltage

2014-04-30
WIP
J392
This SAE Recommended Practice pertains to electrical systems of motorcycles both with and without batteries. Purpose This document provides minimum illumination voltage values for all motorcycle classifications as specified in SAE J213 describes test procedures to determine that these voltages are maintained.
X