Refine Your Search

Topic

Author

Search Results

Standard

Acceleration Factors

2014-09-12
CURRENT
SSB1_003A
This document is an annex to EIA Engineering Bulletin SSB-1, Guidelines for Using Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugged Applications (the latest revision). This document provides reference information concerning acceleration factors commonly used by device manufacturers to model failure rates in conjunction with statistical reliability monitoring. These acceleration factors are frequently used by OEMs in conjunction with physics of failure reliability analysis to assess the suitability of plastic encapsulated microcircuits and semiconductors for specific end use applications.
Standard

Driver Vehicle Interface (DVI) Message Priority and Presentation

2018-11-05
WIP
J3189
This SAE Recommended Practice applies to both Original Equipment Manufacturer (OEM) and aftermarket message-generating systems for light and heavy vehicles. The recommended practice covers both message prioritization and presentation (including simultaneous display of messages) for visual and auditory modalities. In addition, this recommended practice will consider temporal aspects of external events (e.g. merging into heavy traffic, time-to-collision) and their impact on temporal presentation and format (including multi-modal) of messages.
Standard

Emergency Warning Device and Emergency Warning Device Protective Container

1989-12-01
HISTORICAL
J774_198912
This SAE Standard provides test procedures and performance requirements for emergency warning devices (triangular shape), without self-contained energy sources, that are designed to be carried in motor vehicles and used to warn approaching traffic of the presence of a stopped vehicle, except for devices designed to be permanently affixed to the vehicle, and provides test procedures and performance requirements for protective containers for such emergency warning devices.
Standard

Tolerances, Metric, Nickel, Nickel Alloy, and Cobalt Alloy Tubing

1981-04-01
HISTORICAL
MAM2263
This specification covers established metric manufacturing tolerances applicable to seamless and welded thin-wall aircraft tubing of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. The term "excl" is used to apply only to the higher figure of a specified range.
Standard

Tolerances, Metric, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate

1994-04-01
HISTORICAL
MAM2262B
This specification covers established manufacturing tolerances applicable to sheet, strip, and plate of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of a specified range.
Standard

Tolerances, Metric, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate

1989-01-01
HISTORICAL
MAM2262A
This specification covers established manufacturing tolerances applicable to sheet, strip, and plate of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term 'excl' is used to apply only to the higher figure of a specified range.
Standard

Tolerances, Metric, Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire

2003-03-12
HISTORICAL
MAM2261C
This specification covers established metric manufacturing tolerances applicable to bars, rods, and wire of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of a specified range.
Standard

Tolerances, Metric, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate

2003-03-12
HISTORICAL
MAM2262C
This specification covers established manufacturing tolerances applicable to sheet, strip, and plate of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of a specified range.
Standard

Tolerances, Metric, Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire

1990-01-01
HISTORICAL
MAM2261A
This specification covers established metric manufacturing tolerances applicable to bars, rods, and wire of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of a specified range.
Standard

Tolerances, Metric, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate

1981-10-01
HISTORICAL
MAM2262
This specification covers established manufacturing tolerances applicable to sheet, strip, and plate of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term 'excl' is used to apply only to the higher figure of a specified range.
Standard

Tolerances, Metric, Nickel, Nickel Alloys, and Cobalt Alloy Bars, Rods, and Wire

2007-07-19
CURRENT
MAM2261D
This specification covers established metric manufacturing tolerances applicable to bars, rods, and wire of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of a specified range.
Standard

Premium Aircraft-Quality Steel Cleanliness, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

1992-04-01
HISTORICAL
MAM2300A
This specification covers steel cleanliness requirements for premium aircraft-quality ferromagnetic steels by magnetic particle inspection methods, measured in metric (SI) units. Primarily applicable to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, plate, tubing, and extrusions used in fabricating highly-stressed parts where very strict magnetic particle inspection standards are used in final inspection of such parts.
Standard

Tolerances, Metric, Nickel, Nickel Alloy, and Cobalt Alloy Tubing

2003-03-12
HISTORICAL
MAM2263A
This specification covers established metric manufacturing tolerances applicable to seamless and welded thin-wall aircraft tubing of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. The term "excl" is used to apply only to the higher figure of a specified range.
Standard

Tolerances, Metric, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate

2007-09-13
CURRENT
MAM2262D
This specification covers established manufacturing tolerances applicable to sheet, strip, and plate of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term 'excl' is used to apply only to the higher figure of a specified range.
Standard

Tolerances, Metric, Nickel, Nickel Alloy, and Cobalt Alloy Tubing

2007-09-13
CURRENT
MAM2263B
This specification covers established metric manufacturing tolerances applicable to seamless and welded thin-walls aircraft tubing of nickel, nickel alloys, and cobalt alloys ordered to metric dimensions. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. The term 'excl' is used to apply only to the higher figure of a specified range.
Standard

Steel Cleanliness, Aircraft Quality Steel Magnetic Particle Inspection Procedure Metric (Si) Measurement

2003-03-12
HISTORICAL
MAM2301B
This specification covers steel cleanliness requirements in SI (metric) units for aircraft-quality ferro-megnetic steels, other than hardenable corrosion-resistant steels, by magnetic particle inspection methods. AMS 2301 is the inch/pound version of this MAM. This procedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Steel Cleanliness, Aircraft Quality Steel Magnetic Particle Inspection Procedure Metric (Si) Measurement

1996-03-01
HISTORICAL
MAM2301
This specification covers steel cleanliness requirements in SI (metric) units for aircraft-quality ferro-megnetic steels, other than hardenable corrosion-resistant steels, by magnetic particle inspection methods. AMS 2301 is the inch/pound version of this MAM. This procedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
X