Standard
Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type
1998-05-01
HISTORICAL
AMSR83283
This specification covers 45 durometer hardness, high strength silicone rubber.
Search Results
Standard
Gasket, Metallic-Encased
2014-05-27
CURRENT
AMSHHG101A
This specification covers metallic-encased gaskets with and without inlays.
Standard
Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type
2014-03-19
CURRENT
AMSR83283A
This specification covers 45 durometer hardness, high strength silicone rubber.
Standard
REFERENCE FLUID FOR TESTING HYDROCARBON FUEL RESISTANT MATERIALS 10% Aromatic Content
1980-10-01
HISTORICAL
AMS3022
This specification covers a hydrocarbon fluid mixture for use as a reference fuel test fluid to evaluate the ability of polymeric compounds to conform to designated requirements after immersion in the fluid at a specific temperature for a specified time, as required by an applicable specification.
Standard
REFERENCE FLUID FOR TESTING HYDROCARBON FUEL RESISTANT MATERIALS 10% Aromatic Content
1987-10-01
HISTORICAL
AMS3022A
This specification covers a hydrocarbon fluid mixture for use as a reference fuel test fluid to evaluate the ability of polymeric compounds to conform to designated requirements after immersion in the fluid at a specific temperature for a specified time, as required by an applicable specification.
Standard
REFERENCE FLUID FOR TESTING HYDROCARBON FUEL RESISTANT MATERIALS 10% Aromatic Content
1994-09-01
HISTORICAL
AMS3022B
This specification covers a hydrocarbon fluid mixture for use as a reference fuel test fluid to evaluate the ability of polymeric compounds to conform to designated requirements after immersion in the fluid at a specific temperature for a specified time, as required by an applicable specification.
Standard
Reference Fluid for Testing Hydrocarbon Fuel Resistant Materials: 10% Aromatic Content
1998-11-01
HISTORICAL
AMS3022C
This specification covers a hydrocarbon fluid mixture for use as a reference fuel test fluid to evaluate the ability of polymeric compounds to conform to designated requirements after immersion in the fluid at a specific temperature for a specified time, as required by an applicable specification.
Standard
Reference Fluid for Testing Hydrocarbon Fuel Resistant Materials: 10% Aromatic Content
2011-09-23
CURRENT
AMS3022D
This specification covers a hydrocarbon fluid mixture for use as a reference fuel test fluid to evaluate the ability of polymeric compounds to conform to designated requirements after immersion in the fluid at a specific temperature for a specified time, as required by an applicable specification.
Standard
Test Slabs, Fluoroelastomer (FKM), 70–80 Hardness, for Improved Gas Turbine Engine Oil Compatibility
2017-10-18
CURRENT
AMS3217/8A
This specification covers a fluorocarbon (FKM) rubber stock in the form of molded test slabs.
Standard
Test Slabs, High Strength, Fluorosilicone (FVMQ) 55 - 65
2019-10-16
CURRENT
AMS3217/7B
This specification covers a high strength fluorosilicone (FVMQ) rubber stock in the form of molded test slabs.
Standard
Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75
2020-03-04
CURRENT
AMS3217/2D
This specification covers a standard acrylonitrile butadiene (NBR-L) rubber stock with low acrylonitrile content in the form of molded test slabs.
Standard
O-Ring Tension Testing Calculations
2014-05-06
CURRENT
AIR851C
This document is intended to facilitate calculation of O-Ring tension testing values.
Standard
O-Ring Tension Testing Calculations
2007-06-11
HISTORICAL
AIR851B
This document is intended to facilitate calculation of O-Ring tension testing values.
Standard
Suitable Test Sizes for O-ring Specifications
2007-02-21
HISTORICAL
ARP3050
There are many tests that have been developed to characterize rubber O-rings. Many of these tests are independent of the size of the O-ring being tested. However, there are some tests, specifically, stress/strain properties, that are a function of the O-ring’s size. The purpose of this report is to provide guidelines for specifying O-rings that would be considered “suitable for testing” when writing O-ring material specifications.
Standard
TOP VISUAL QUALITY (TVQ) O-RING PACKINGS AND GASKETS - SURFACE INSPECTION GUIDE AND ACCEPTANCE STANDARD
1965-11-01
HISTORICAL
AS708
This standard establishes the inspection requirements and acceptance standards for optimum surface finish O-ring packings and gaskets. (This is not an O-ring specification as such.)
Standard
Rubber, Ethylene-Propylene, Hydrazine Resistant
2011-09-23
CURRENT
AMSR83412A
This specification covers three types of rubber having good resistance to high and low temperature and hydrazine type propellants, but poor resistance to hydrocarbon oils or solvents. Hydrazines are hazardous chemicals. See “Dangerous Properties of Industrial Materials” by N. Irving Sax.
Standard
Rubber, Ethylene-Propylene, Hydrazine Resistant
1999-07-01
HISTORICAL
AMSR83412
This specification covers three types of rubber having good resistance to high and low temperature and hydrazine type propellants, but poor resistance to hydrocarbon oils or solvents. Hydrazines are hazardous chemicals. See “Dangerous Properties of Industrial Materials” by N. Irving Sax.
Standard
Fluid, Reference for Testing Polyalphaolefin (PAO) Resistant Material
2017-01-18
HISTORICAL
AMS3400
This specification covers a polyalphaolefin/ester-blend fluid.
Standard
Fluid, Reference for Testing Polyalphaolefin (PAO) Resistant Material
2022-09-08
CURRENT
AMS3400A
This specification covers a polyalphaolefin/ester-blend fluid.
Standard
SPONGE, CHLOROPRENE RUBBER Firm
1973-12-01
HISTORICAL
AMS3199H
This specification covers firm chloroprene-rubber sponge in the form of sheet, strip, molded shapes, or other forms, as ordered.
