Search Results

Real time knowledge of the metabolic workload of an astronaut during an Extra-Vehicular Activity (EVA) can be instrumental for space suit research, design, and operation. Three indirect calorimetry approaches were developed to determine the metabolic workload of a subject in an open-loop space suit analogue. A study was conducted to compare the data obtained from three sensors: oxygen, carbon dioxide, and heart rate. Subjects performed treadmill exercise in an enclosed helmet assembly, which simulated the contained environment of a space suit while retaining arm and leg mobility. These results were validated against a standard system used by exercise physiologists. The carbon dioxide sensor method was shown to be the most reliable and a calibrated version of it will be integrated into the MX-2 neutral buoyancy space suit analogue.

The fit of a spacesuit has been identified as a crucial factor that will determine its usability. Therefore, because one-size-fits-all spacesuits seldom fit any wearer well, and because individually tailored spacesuits are costly, the University of Maryland has conducted research into a resizable Extravehicular Activity (EVA) suit. This resizing is accomplished through a series of cable-driven parallel manipulators, which are used to adjust the distance between plates and rings built into a soft space suit. These actuators, as well as enabling passive suit resizing, could be used to actively assist the astronaut's motion, decreasing the torques that must be applied for movement in a pressurized suit. This paper details the development and testing of an arm prototype, which is used to better understand the dynamics of a more complex torso-limb system.

In the present study, 8 experienced neutral buoyancy test divers were instructed to maintain quiet relaxed posture while ‘standing’ in instrumented space shuttle middeck (IVA) type foot restraints in the Space Systems Laboratory (SSL) Neutral Buoyancy Research Facility (NB) and onboard the NASA KC-135 reduced gravity aircraft (PF). Foot restraint reaction loads and subject joint angles were recorded during blind and sighted conditions. Visual cues played a significant role in subject anxiety onboard the KC; however, while subject joint angles and reaction loads differed between NB and PF conditions, no differences were found between sighted and blind conditions in either simulation environment for reaction loads or joint angles. This very surprising result indicates that there are not only anecdotal but concrete differences between reduced gravity and terrestrial posture mechanisms.

There has recently been an increasing focus on humans working cooperatively with robotic systems in space exploration and operations. Considerable work has been performed on distributed architectures to enable such interaction. The research described here looks at the human-robot interaction from the EVA astronaut's perspective, describing a first generation human-machine interface implemented and tested on an existing experimental spacesuit analog, the MX-2. The ultimate goal is to enable EVA astronauts to operate more independently of remote operators and work effectively with autonomous and teleoperated robots. The current system integrates speech interaction and visual interfaces as a first step towards this goal.

The research discussed in this paper demonstrates further advancements in the concept of a Morphing Upper Torso, which incorporates robotic elements within the pressure suit design to enable a resizable, highly mobile and easy to donn/doff spacesuit. A full scale experimental model has been made, which accompanies several analytical models. The Jacobian matrix for the robotic system, which multiplies the total twist vector of the system to yield the vector of actuator velocities, is derived. This dynamic analysis enables quantification of the dynamic actuator requirements, given demanded trajectories of the rings. A motion capture pilot study was done to develop a methodology to obtain measurements of suit movement and hence the ring trajectories. Subjects performed various tasks that a suited astronaut may perform on a planetary surface, while wearing a torso mockup within the motion capture system.

This paper describes a unique concept for donning and doffing a spacesuit from a pressurized rover or habitat, which merges three independent concepts: suitports, neck-entry EVA suits, and the Morphing Upper Torso. The union of these concepts creates a novel and exciting suit and suitport system architecture, with many potential benefits over traditional suitport systems. To develop this concept, a neck-entry Morphing Upper Torso experimental model has been designed and fabricated, and systems level design studies have been performed, including visualization with the aid of CAD models of the neck-entry suitport on a small pressurized rover and a lunar habitat. As well, a donning test-station has been developed and used for experiments in 1-G, simulated microgravity and simulated partial gravity.

The University of Maryland Space Systems Laboratory and ILC Dover LP have developed a novel concept: a soft pressure garment that can be dynamically reconfigured to tailor its shape properties to the wearer and the desired task set. This underlying concept has been applied to the upper torso of a rear entry suit, in which the helmet ring, waist ring and two shoulder rings make up a system of four interconnected parallel manipulators with tensile links. This configuration allows the dynamic control of both the position and orientation of each of the four rings, enabling modification of critical sizing dimensions such as the inter-scye distance, as well as task-specific orientations such as helmet, scye and waist bearing angles. Half-scale and full-scale experimental models as well as an analytical inverse kinematics model were used to examine the interconnectedness of the plates, the role of external forces generated by pressurized fabric, and the controllability of the system.

The University of Maryland has performed a detailed design for the space equivalent of an atmospheric diving suit. The Space Construction and Orbital Utility Transport (SCOUT) is a small single-person spacecraft, with all necessary utilities for extended sorties away from the host station. Through a pair of AX-5 style space suit arms integrated into the cabin wall, as well as a trio of dexterous manipulators, the SCOUT operator can directly interact with the work site environment, performing spacecraft servicing, structural assembly, or other tasks traditionally done by an astronaut in a space suit. Originally designed as an augmentation to the NASA Gateway station architecture for the Earth-Moon L1 system, studies indicate that a SCOUT-type EVA system would represent a substantial benefit to International Space Station operations as well.

The University of Maryland Space Systems Laboratory has developed a system that replicates some limited aspects of pressure suits to facilitate neutral buoyancy research into EVA bioinstrumentation, advanced EVA training, and EVA/robotic interactions. After a two year upgrade from its MX-1 predecessor, the MX-2 space suit analogue is currently undergoing a variety of system integration tests in preparation for initial operational testing, leading to routine use for EVA simulation and as a testbed for advanced space suit technology. The MX-2 is built around a hard upper torso with integrated hemispherical helmet and rear-entry hatch. Three-layer soft-goods are used for the arms and lower torso, while an open loop air system regulates suit pressure to 3 psid. Wrist disconnects allow the use of standard EMU or Orlan gloves, or experimental gloves such as the mechanical counterpressure gloves and power-assisted gloves developed previously by the SSL.