Search Results

A Microwave Enhanced Solid Waste Freeze Drying Prototype system has been developed for the treatment of solid waste materials generated during extended manned space missions. The system recovers water initially contained within wastes and stabilizes the residue with respect to microbial growth. Dry waste may then be safely stored or passed on to the next waste treatment process. Operating under vacuum, microwave power provides the energy necessary for sublimation of ice contained within the waste. This water vapor is subsequently collected as relatively pure ice on a Peltier thermoelectric condenser as it travels en route to the vacuum pump. In addition to stabilization via dehydration, microwave enhanced Freeze Drying reduces the microbial population (∼90%) in the waste.

The inedible portion of plant biomass in closed regenerative life support systems must be reprocessed producing recyclable by-products such as carbon dioxide, sugars, and other useful organic species. High solids biomass slurries containing up to 27 wt% were successfully prepared in a stirred batch reactor and then pumped using a single piston valveless pump. Wheat straw, potato, and tomato crop residues were acid hydrolyzed using 1.2 wt% sulfuric acid at 180°C and 1.2 MPa for 0.75-1.5 hours. Viscosity for a 25 wt% acid hydrolyzed wheat straw emulsion (Bingham-plastic) was 6.5 centipoise at 3 cm/sec and 25°C.

Waste Management Systems (WMSs) designed for use aboard long-term spacecraft missions and within Lunar and planetary habitations must reduce volume and recover useful resources from solid wastes, as well as impart chemical and microbial stability to stored wastes. Many WMS processes produce high concentrations of toxic emissions that can periodically overwhelm Trace Contaminant Control Systems (TCCSs) designed to handle nominal atmospheric contaminants. A prototype Catalytic Oxidation System (COS) has been developed for this contingency, and when mated to different WMS processes, will treat these toxic emissions on an as-needed basis. The COS reactor utilizes a platinum and ruthenium bimetallic catalyst supported on mesoporous zirconia that is highly active and oxidizes at relatively low temperature a wide variety of volatile organic compounds (VOCs) and inorganic toxic emissions produced by WMS processes.

A Microwave Enhanced Freeze Drying Solid Waste (MEFDSW) processor was delivered to NASA-Ames Research Center by Umpqua Company having been funded through a Small Business Innovative Research Phase II program. The prototype hardware was tested for its performance characteristics and for its functionality with the primary focus being the removal of water from solid wastes. Water removal from wastes enables safe storage of wastes, prevents microbes from growing and propagating using the waste as a substrate and has potential for recovery and reuse of the water. Other objectives included measurements of the power usage and a preliminary estimate of the Equivalent System Mass (ESM) value. These values will be used for comparison with other candidate water removal technologies currently in development.

A microwave powered solid waste stabilization and water recovery prototype was delivered to Ames Research Center through an SBIR Phase II contract awarded to Umpqua Research Company. The system uses a container capable of holding 5.7 dm3 volume of waste. The microwave power can be varied to operate either at full power (130 W) or in a variable mode from 0% and 100%. Experiments were conducted with different types of wastes (wet cloth, simulated feces/diarrheal wastes, wet trash and brine) at different levels of moisture content and dried under varying microwave power supply. This paper presents the experimental data. The results provide valuable insight into the different operation modes under which the prototype can be used to recover water from the wastes in a space environment. Further investigations and testing of the prototype are recommended.

In February 2004 NASA released “The Vision for Space Exploration.” The goals outlined in this document include extending the human presence in the solar system, culminating in the exploration of Mars. A key requirement for this effort is to identify a safe and effective method to process waste. Methods currently under consideration include incineration, microbial oxidation, pyrolysis, drying, and compaction. Although each has advantages, no single method has yet been developed that is safe, recovers valuable resources including oxygen and water, and has low energy and space requirements. Thus, the objective of this work was to develop a low temperature oxidation process to convert waste cleanly and rapidly to carbon dioxide and water. TDA and NASA Ames Research Center have developed a pilot scale low temperature ozone oxidation system to convert organic waste to CO2 and H2O.

Equivalent System Mass (ESM) is used by the Advanced Life Support (ALS) community to quantify mission costs of technologies for space applications (Drysdale et al, 1999, Levri et al, 2000). Mass is used as a cost measure because the mass of an object determines propulsion (acceleration) cost (i.e. amount of fuel needed), and costs relating to propulsion dominate mission cost. Mission location drives mission cost because acceleration is typically required to initiate and complete a change in location. Total mission costs may be reduced by minimizing the mass of materials that must be propelled to each distinct location. In order to minimize fuel requirements for missions beyond low-Earth orbit (LEO), the hardware and astronauts may not all go to the same location. For example, on a Lunar or Mars mission, some of the hardware or astronauts may stay in orbit while the rest of the hardware and astronauts descend to the planetary surface.

Solid Waste Management (SWM) systems of current and previous space flight missions have employed relatively uncomplicated methods of waste collection, storage and return to Earth. NASA's long-term objectives, however, will likely include human-rated missions that are longer in both duration and distance, with little to no opportunity for re-supply. Such missions will likely exert increased demands upon all sub-systems, particularly the SWM system. In order to provide guidance to SWM Research and Technology Development (R&TD) efforts and overall system development, the establishment of appropriate SWM system requirements is necessary. Because future long duration missions are not yet fully defined, thorough mission-specific requirements have not yet been drafted.

Several solid waste management (SWM) systems currently under development for spacecraft deployment result in the production of a variety of toxic gaseous contaminants. Examples include the Plastic Melt Waste Compactor (PMWC) at NASA - Ames Research Center1, the Oxidation/Pyrolysis system at Advanced Fuel Research2, and the Microwave Powered Solid Waste Stabilization and Water Recovery (MWSWS&WR) System at UMPQUA Research Company (URC). The current International Space Station (ISS) airborne contaminant removal system, the Trace Contaminant Control Subassembly (TCCS), is designed to efficiently process nominal airborne contaminants in spacecraft cabin air. However, the TCCS has no capability to periodically process the highly concentrated toxic vapors of variable composition, which are generated during solid waste processing, without significant modifications.

A Microwave Powered Solid Waste Stabilization and Water Recovery Prototype system has been developed for the treatment of solid waste materials generated during extended manned space missions. The system recovers water initially contained within wastes and stabilizes the residue with respect to microbial growth. Dry waste may then be safely stored or passed on to the next waste treatment process. Using microwave power, water present in the solid waste is selectively and rapidly heated. Liquid phase water flashes to steam and superheats. Hot water and steam formed in the interior of waste particles create an environment that is lethal to bacteria, yeasts, molds, and viruses. Steam contacts exposed surfaces and provides an effective thermal kill of microbes, in a manner similar to that of an autoclave. Volatilized water vapor is recovered by condensation.

Advanced space life support systems, especially systems that include growing plants to produce food, require the recovery of resources - primarily carbon dioxide and water - from various hydrocarbon wastes. Supercritical water oxidation (SCWO) of wastes is one of several possible techniques for oxidizing waste organics to recover the carbon dioxide and water. Supercritical water oxidation has the advantages of fast kinetics, complete oxidation, and the minimization of undesirable side products. However, the SCWO process requires further development before the process can be implemented in space life systems. One of the SCWO development needs is in the area of destruction of insoluble solids - such as inedible biomass or human wastes. Insoluble solids have to be introduced into a SCWO reactor as particles, and it can be expected that the particle size of the solids will affect the rate of reaction.

For Supercritical Water Oxidation (SCWO), particle size is a key factor effecting requirements for feed preparation, slurry concentration and pumping, rate of reaction, and reactor size. To address these issues, an experimental research program was undertaken to evaluate the effect of particle size on the reaction kinetics in SCWO of solid particulates (wheat straw and cellulose particles in this case). The experiments also included evaluation of the effects of temperature, pressure, and agitation. Some corrosion data were obtained. A two-step reaction mechanism was revealed. Empirically based mathematical relationships were developed that can be used for SCWO system design.

Gradient magnetically assisted fluidized bed (G-MAFB) methods are under development for the decomposition of solid waste materials in microgravity and hypogravity environments. The G-MAFB has been demonstrated in both laboratory and microgravity flight experiments. In this paper we summarize the results of gasification reactions conducted under a variety of conditions, including: combustion, pyrolysis (thermal decomposition), and steam reforming with and without oxygen addition. Wheat straw, representing a typical inedible plant biomass fraction, was chosen for this study because it is significantly more difficult to gasify than many other typical forms of solid waste such as food scraps, feces, and paper. In these experiments, major gasification products were quantified, including: ash, char, tar, carbon monoxide, carbon dioxide, methane, oxygen, and hydrogen.

A variety of techniques, including supercritical water oxidation, fluidized bed combustion, and microwave incineration have been applied to the destruction of solid wastes produced in regenerative life support systems supporting long duration manned missions. Among potential problems which still deserve attention are the need for operation in a variety of gravitational environments, and the requirement for improved methods of presenting concentrated solids to the reactor. Significant improvements in these areas are made possible through employment of the magnetically assisted gasification process. In this paper, magnetic methods are described for manipulating the degree of consolidation or fluidization of granular ferromagnetic media, for application in a gravity independent three step solid waste destruction process.

Since the mid 1980s, NASA has developed advanced waste management technologies that collect and process waste. These technologies include incineration, hydrothermal oxidation, pyrolysis, electrochemical oxidation, activated carbon production, brine dewatering, slurry bioreactor oxidation, composting, NOx control, compaction, and waste collection. Some of these technologies recover resources such as water, oxygen, nitrogen, carbon dioxide, carbon, fuels, and nutrients. Other technologies such as the Waste Collection System (WCS - the commode) collect waste for storage or processing. The need for waste processing varies greatly depending upon the mission scenario. This paper reviews the waste management technology development activities conducted by NASA since the mid 1980s and explores the drivers that determine the application of these technologies to future missions.

In February 2004 NASA released “The Vision for Space Exploration.” The goals outlined in this document include extending the human presence in the solar system, culminating in the exploration of Mars. A key requirement for this effort is to identify a safe and effective method to process waste. Methods currently under consideration include incineration, microbial oxidation, pyrolysis, drying, and compaction. Although each has advantages, no single method has yet been developed that is safe, recovers valuable resources including oxygen and water, and has low energy and space requirements. Thus, the objective of this work is to develop a low temperature oxidation process to convert waste cleanly and rapidly to carbon dioxide and water. Previously, TDA Research, Inc. demonstrated the potential of a low temperature dry oxidation process using ozone in a small laboratory reactor.