Search Results

Standard

Protocol to Verify Performance of New Xenon Arc Test Apparatus

2016-08-02

CURRENT

J2413_201608

This Recommended Practice is for use by contractual parties to verify new xenon arc test apparatus ability to perform SAE J1885, J1960, J2412, J2527, or other as specified.

Standard

Protocol To Verify Performance of New Xenon Arc Test Apparatus

2003-12-22

HISTORICAL

J2413_200312

This Recommended Practice is for use by contractual parties to verify new xenon arc test apparatus ability to perform SAE J1885, J1960, J2412, J2527, or other as specified.

Standard

Standard Specification for Allowable Defects in Rolled Goods for Interior Trim

2022-01-28

CURRENT

J3064_202201

This specification is written for rolled goods used for trim sets for automotive seats. Face materials are fabric-woven or knitted textiles, and plastic goods like polyvinyl chloride (PVC), thermoplastic polyolefin (TPO), or thermoplastic polyurethane (TPU). This specification covers material rolled goods with and without foam or backing adhered to the face material.

Standard

Seam Damage Test Procedure

2022-09-14

CURRENT

J1531_202209

This procedure is used to determine seam strength and seam fatigue of automotive textiles, vinyl coated fabrics and related soft trim materials.

Standard

Test Method for Measuring Wet Color Transfer Characteristics

2009-03-04

HISTORICAL

J1326_200903

This procedure describes a method of measuring the resistance to wet color transfer of materials such as textiles, leather and composites.

Standard

Glossary of Fiberboard Terminology

2023-06-28

CURRENT

J947_202306

This information report presents the terminology and definitions as used in the fiberboard industry.

Standard

Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials

2014-01-06

HISTORICAL

J1767_201401

The practice described applies to textile and flexible plastic parts and materials used in automotive vehicles. Special care should be taken when high pile carpet samples are being evaluated.

Standard

Method of Testing Resistance to Scuffing of Trim Materials

2020-09-18

CURRENT

J365_202009

This test can be used to determine the resistance to scuffing of test specimens such as fiberboards, fabrics, vinyl-coated fabrics, leathers, and similar trim materials.

Standard

Test Method for Determining Stiffness (Modulus of Bending) of Interior Trim Materials and Substrates

2003-04-11

HISTORICAL

J949_200304

This SAE Standard presents a method of determining the stiffness of interior trim materials, substrates, and composites by a three-point bending test.

Standard

TEST METHOD FOR DETERMINING STIFFNESS (MODULUS OF BENDING) OF FIBERBOARDS

1981-08-01

HISTORICAL

J949_198108

This SAE Standard presents a method of determining the stiffness of fiberboards.

Standard

Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

2022-08-05

CURRENT

J949_202208

This SAE Standard presents a method of determining the stiffness of interior trim materials, substrates, and composites by a three-point bending test.

Standard

Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test

2009-04-20

HISTORICAL

J949_200904

This SAE Standard presents a method of determining the stiffness of interior trim materials, substrates, and composites by a three-point bending test.

Standard

Test Method for Determining Cold Cracking of Flexible Plastic Materials

2021-09-15

CURRENT

J323_202109

This SAE Recommended Practice is applicable for determining the cold characteristics of flexible plastic materials, as applicable. It consists of three different methods for determining low-temperature properties of materials depending on type of material and end use. The method used shall be as specified by the contractual parties.

Standard

Test Method for Determining Cold Cracking of Flexible Plastic Materials

2009-11-09

HISTORICAL

J323_200911

This SAE Recommended Practice is applicable for determining the cold characteristics of flexible plastic materials, as applicable. It consists of three different methods for determining low-temperature properties of materials depending on type of material and end use. The method used shall be as specified by the contractual parties.

Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

2023-02-20

CURRENT

J912_202302

This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.

Standard

INSTRUMENTAL COLOR DIFFERENCE MEASUREMENT FOR EXTERIOR FINISHES, TEXTILES AND COLORED TRIM

1986-06-01

HISTORICAL

J1545_198606

The practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified color standard. This practice is intended for use with parts or materials which are opaque or nearly so and does not apply to transparent materials. Materials covered by this practice include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film.

Standard

Outdoor Weathering of Exterior Materials

2022-05-18

CURRENT

J1976_202205

This test method specifies the exposure racks, black boxes, and instrumentation, which shall be used for the outdoor weathering of materials for automotive exterior application.

Standard

STANDARD CLASSIFICATION SYSTEM FOR FIBERBOARDS

1983-06-01

HISTORICAL

J1323_198306

This classification system provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947, Glossary of Fiberboard Terminology. The test methods commonly used for fiberboards are defined in SAE J315, Fiberboard Test Procedure.

Standard

Standard Classification System for Fiberboards

2003-12-11

HISTORICAL

J1323_200312

This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. The test methods commonly used for fiberboards are defined in SAE J315.

Standard

STANDARD CLASSIFICATION SYSTEM FOR FIBERBOARDS

1990-09-01

HISTORICAL

J1323_199009

This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. The test methods commonly used for fiberboards are defined in SAE J315.