Refine Your Search

Topic

Author

Affiliation

Search Results

Standard

Standard Rainflow File Format

2002-04-30
HISTORICAL
J2623_200204
This SAE Standard provides a definition of a rainflow file format. This type of simple text file would contain all relevant information about the rainflow cycle content of a time history. Included information are Comments, Signal Range, Signal Mean, Number of Cycles, Signal Maximum, Signal Minimum. Rainflow cycle counting has become the most accepted procedure for identifying material fatigue relevant cycles in complex variable amplitude load time histories. The cycle counting methods account for the effects of material plasticity and material memory of prior deformation, and the resulting compressed history information is used by durability analysts to estimate the effects of a given service or test history.
Standard

Standard Rainflow File Format

2018-08-24
CURRENT
J2623_201808
This SAE Standard provides a definition of a rainflow file format. This type of simple text file would contain all relevant information about the rainflow cycle content of a time history. Included information are Comments, Signal Range, Signal Mean, Number of Cycles, Signal Maximum, Signal Minimum. Rainflow cycle counting has become the most accepted procedure for identifying material fatigue relevant cycles in complex variable amplitude load time histories. The cycle counting methods account for the effects of material plasticity and material memory of prior deformation, and the resulting compressed history information is used by durability analysts to estimate the effects of a given service or test history.
Book

The Global Chassis Sector Report: An Analysis of the Braking, Steering and Suspension Markets

2015-06-01
This exclusive report produced by ABOUT Automotive concentrates on three of the most important areas within the automotive chassis sector: • Braking components, modules and systems • Suspension and damping systems • Steering systems It addresses the critical issues facing the automotive chassis sector, and is broken down into eight major sections: • Key market drivers • Braking components, modules and systems • Suspension and damping systems • Steering systems • Chassis sector supplier profiles • OEM system technology trends • OEM modular sourcing trends • Technology roadmap This includes mainstream, mass-market technology, as well as innovative and advanced technology where appropriate in each product area. The report also analyses the approach of each supplier to the market, including its role within the emergence of innovative technologies. Likewise, the research provides an analysis of the technology and sourcing trends apparent among the major global carmakers.
Book

Counterfeit Electronic Parts and Their Impact on Supply Chains

2014-10-20
Electronic parts are used throughout industry to run everyday products, such as cell phones, and also highly technical products, such as aircraft, missiles, and spacecraft. Unlike cell phones, which are often replaced every year, the highly technical products may remain in service from 20 to more than 80 years. But what happens if the original electronic part, with a life cycle of 18 months, is no longer available? Some manufacturers have discovered that they have unwittingly purchased counterfeit ones. Counterfeit Electronic Parts and Their Impact on Supply Chains examines how these items are negatively affecting the aviation, spacecraft, and defense sectors and what can be done about it.
Standard

Ball Joints

2012-10-15
CURRENT
J490_201210
This SAE Standard covers the general and dimensional data for various types of ball joints with inch threads commonly used on control linkages in automotive, marine, and construction and industrial equipment applications. Inasmuch as the load carrying and wear capabilities of ball joints vary considerably with their design and fabrication, it is suggested that the manufacturers be consulted in regard to these features and for recommendations relating to application of the different types and styles available. The inclusion of dimensional data in this standard is not intended to imply that all the products described are stock production sizes. Consumers are requested to consult with manufacturers concerning availability of stock production parts.
Standard

Engine and Transmission Dipstick Marking

2011-06-13
CURRENT
J614_201106
This SAE Recommended Practice provides information useful in the marking of engine and transmission dipsticks used for fluid level indication.
Standard

Diesel Fuel Injector Assembly - Flange Mounted Types 5 and 6

2002-12-13
HISTORICAL
J629_200212
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of two types of fuel injectors in diesel engines. The location and dimensions of the fuel inlet, leak-off connections, and flange design are not defined since they may vary according to the particular application.
Standard

Oem/VendorS Interface Specification for Vehicle Electronic Programming Station

1992-12-01
HISTORICAL
J1924_199212
The purpose of the SAE Information Report is to address the method of loading vehicle electronic controllers with chassis and customer specific parameters. This specification shall establish an interface definition. The interface definition must be mutually agreeable to truck OEMs and vendors. The purpose of this specification is not to answer the large protocol issues raised by systems such as GM's MAP.
Standard

Diesel Fuel Injector Assembly—Types 8, 9, 10, and 11

2002-12-13
HISTORICAL
J265_200212
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of four types of fuel injectors in diesel engines. Two of the types specified are flats-located injectors. The location and dimensions of the fuel inlet, leak-off connections, and type of attachment are not defined since they may vary according to the particular application.
Standard

Paint and Trim Code Location

2006-11-13
CURRENT
J2235_200611
This SAE Recommended Practice is designed to provide readily accessible paint and trim code information on all passenger vehicles, lightweight trucks, and vans in a way that minimizes the time and effort required to locate and effectively use that information for body repair, parts ordering, vehicle maintenance, and information systems.
Standard

Metric Ball Joints

2012-10-15
CURRENT
J2213_201210
This SAE Standard covers the general and dimensional data for industrial quality ball joints commonly used on control linkages in metric automotive, marine, construction, and industrial equipment applications.
Standard

Brake Force Distribution Field Test Procedure for Truck and Bus

1993-06-10
HISTORICAL
J225_199306
This SAE Recommended Practice provides a field test procedure and instructions for: a. Instrumentation and Equipment b. Vehicle Preparation c. Test of air-braked single and combination vehicles d. Calculation of brake force distribution e. This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505. This code provides a method to determine the brake force distribution (brake system effectiveness) for commercial vehicles.
Standard

Diesel Fuel Injector Assembly Type 28 (9.5 mm)

2002-10-25
HISTORICAL
J1984_200210
This document specifies the dimensional requirements necessary for the mounting and interchangeability of a type of fuel injector used in diesel engines.
Book

Future Technology for Hybrid and Pure Electric Cars 2015-2025

2014-11-01
E-cars are oversupplied and changing in all respects but in this frenzy of birth and death the future is being created with hybrid cars rapidly gaining market share. The sales of pure electric cars are likely to take off in the second half of the coming decade as certain technical and cost challenges are resolved. Toyota and Tesla have hugely benefitted from correct market positioning. Yet, Toyota is now betting strongly on fuel- cell hybrids, and Tesla on mainstream pure electric cars. A vicious shakeout of car and battery manufacturers has commenced with the winners expecting a handsome pay-off. IDTechEx finds that the global sales of hybrid and pure electric cars will triple to $178.9 billion in 2024 as they are transformed. For example, components are becoming integrated; the range extender, as an optional extra, breaks down the difference between pure electric and hybrid. Car manufacturers vertically integrate and collaborate, competing with their suppliers.
Book

Two-Wheelers, Micro-EVs (Quadricycles), Mobility for Disabled 2013-2023

2014-11-01
This report looks closely at global trends in light electric vehicles’ (LEVs) technology, manufacture and market drivers such as legislation and the fact that several Chinese cities are banning or severely restricting LEVs. In the last few years, nearly every nation has bought ebikes from China, and in some cases, the volumes are now significant. Sales will reach 130 million yearly before 2025, making it one of the world's largest industries. The report encompasses over 70 brands, and gives forecasts of sales numbers, unit prices and total market value for 2013-2023. A significant percentage of ebikes sold are scooters in that they have the driver's feet rest on a platform - they are not straddled by the driver. Today, the LEV industry is dominated by large bicycle companies, due to their access to distribution. In the future, these companies will face major competition, and may be pushed aside by car, motorcycle, and car parts companies.
Book

Hybrid and Electric Buses and Taxis 2013-2023: Forecasts, Opportunities, Players

2014-01-01
This is the world's first report forecasting the global market for electric buses and taxis both hybrid and pure electric. It separately forecasts the market in the most important area, China, and it takes a detailed look at technologies present and future with a blunt assessment of reasons for failure and threats for the future. The market for electric buses and taxis will multiply over 8 times in the next decade, approaching $60 billion not long after that. China will become by far the largest market for both electric buses and electric taxis within the decade. This report looks at the statistics and trends for conventional buses and taxis, the government incentives, paybacks and new technologies with detailed tables and figures to summarize the situation, so the reader can understand the situation with ease.
X