Standard
Universal Symbols for Operator Controls on Industrial Equipment
1987-01-30
CURRENT
J298_198701
Search Results
Standard
Symbols and Color Codes for Maintenance Instructions, Container and Filler Identification
1992-12-01
CURRENT
J223_199212
Standard
SAE J1939 Network Security
2017-03-06
WIP
J1939-91
This document will provide recommendations to vehicle manufacturers and component suppliers in securing the SAE J1939-13 connector interface from the cybersecurity risks posed by the existence of this connector.
Standard
Performance Requirements for Nonmetallic Air Brake System Tubing
2014-08-26
WIP
J2547
This SAE Standard covers the minimum requirements for nonmetallic tubing as manufactured for use in air brake systems which tubing is different from that described in SAE J844. It is not intended to cover tubing for any portion of the system which operates continuously below - 40 degrees C or above +93 degrees C, above a maximum working gage pressure of 1.0 MPa, or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections, which maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this document, SAE J1131 and SAE J2494-3, to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections which are used in the construction of such assemblies.
Standard
Constant Speed Aerodynamic Procedure for Heavy Vehicles
2017-09-25
WIP
J3156
Develop and document an aerodynamic constant speed procedure for heavy vehicles that can accurately calculate the aerodynamic performance through the typical expected yaw angles during operation at highway speeds.
Standard
Taxonomy and Definitions for Automated Multi-Vehicle Truck and Bus Systems
2017-07-10
WIP
J3150
Scope: This document provides a taxonomy and definitions for trucks and buses with GVWR of more than 10,000 pounds with driving automation systems that perform part or all of the dynamic driving task on a sustained basis and that range in level from no driving automation (level 0) to full driving automation (level 5).
Standard
Engine-Off Cab Heating and Air Conditioning Systems Test Procedure and Performance Requirements - Trucks with and Without Sleepers
2012-02-06
HISTORICAL
J2918_201202
This SAE Recommended Practice establishes uniform test procedures and performance requirements for engine-off heating, ventilation, and air conditioning (HVAC) systems in order to achieve driver thermal comfort in both winter and summer rest periods. This specification will apply to heavy trucks with and without sleeper compartments, including but is not limited to Class 6, 7, and 8 powered vehicles.
Standard
Engine-Off Cab Heating and Air Conditioning Systems Test Procedure and Performance Requirements - Trucks with and without Sleepers
2022-06-20
CURRENT
J2918_202206
This SAE Recommended Practice establishes uniform test procedures and performance requirements for engine-off heating, ventilation, and air conditioning (HVAC) systems in order to achieve driver thermal comfort in both winter and summer rest periods. This specification will apply to heavy trucks with and without sleeper compartments, including but is not limited to Class 6, 7, and 8 powered vehicles.
Standard
Braking Performance - Rubber-Tired, Self-Propelled Cranes
2019-02-27
CURRENT
J1977_201902
This SAE Standard applies to machines as defined in Appendix A. Some of these machines can travel on-highway, but function primarily off-highway.
Standard
BRAKING PERFORMANCE—RUBBER-TIRED, SELF-PROPELLED CRANES
1997-04-01
HISTORICAL
J1977_199704
This SAE Standard applies to machines as defined in Appendix A. Some of these machines can travel on-highway, but function primarily off-highway.
Standard
Clutch Dimensions for Truck and Bus Applications
2017-08-14
CURRENT
J1806_201708
Although not limited to, these clutches are normally used on trucks considered as Medium-Duty (Class 6 and 7), as well as Heavy-Duty (Class 8).
Standard
Clutch Dimensions for Truck and Bus Applications
1999-11-30
HISTORICAL
J1806_199911
Although not limited to, these clutches are normally used on trucks considered as Medium-Duty (Class 6 and 7), as well as Heavy-Duty (Class 8).
Standard
Antilock Brake Systems Energy Consumption Test Procedure for Air-Brake-Equipped Truck Tractors, Buses, Trailers, and Dollies
2019-10-07
CURRENT
J2255_201910
This SAE Recommended Practice provides instructions and test procedures for measuring air consumption of air braked vehicles equipped with Antilock Brake Systems (ABS) used on highways.
Standard
ANTILOCK BRAKE SYSTEMS ENERGY CONSUMPTION TEST PROCEDURE FOR AIR-BRAKED-EQUIPPED TRUCK TRACTORS, BUSES, TRAILERS, AND DOLLIES
1996-05-01
HISTORICAL
J2255_199605
This SAE Recommended Practice provides instructions and test procedures for measuring air consumption of air braked vehicles equipped with Antilock Brake Systems (ABS) used on highways.
Standard
Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues
2007-11-15
HISTORICAL
J2641_200711
This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment and promote uniform testing.
Standard
Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues
2015-11-24
HISTORICAL
J2641_201511
This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment and promote uniform testing.
Standard
Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues
2021-05-13
CURRENT
J2641_202105
This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment, and promote uniform testing.
Standard
Drain and Fill Plug for use on Engines, Transmissions, and Axles
2003-07-29
HISTORICAL
J2606_200307
Drain and Fill plugs used on engines, transmissions, transfer cases and front and rear drive axles for class 5 – 8 vehicles.
Standard
Drain and Fill Plug for use on Engines, Transmissions, and Axles
2017-09-19
CURRENT
J2606_201709
Drain and Fill plugs used on engines, transmissions, transfer cases and front and rear drive axles for class 5 – 8 vehicles.
Standard
Test Method to Obtain Lug-Up Torque Data for Heavy-Duty Truck and Bus Engines
2001-04-25
CURRENT
J2548_200104
This SAE Recommended Practice applies to all forms of diesel and natural gas engines fueled by the combination of diesel fuel and natural gas.
