Search Results

Standard

Combination Tail and Floodlamp for Industrial Equipment

2003-05-15

CURRENT

J94_200305

This SAE Standard provides performance and general design requirements and related test procedures for a combination tail and floodlamp for use on industrial wheeled equipment that may be operated on public roads.

Standard

SAE J1939 Network Security

2017-03-06

WIP

J1939-91

This document will provide recommendations to vehicle manufacturers and component suppliers in securing the SAE J1939-13 connector interface from the cybersecurity risks posed by the existence of this connector.

Standard

Safety Assurance Trailers for SAE J1939-22 C-PGs

2022-02-25

WIP

J1939-77

This document specifies the technical requirements for several different trailers that may be incorporated into J1939-22 C-PG payloads to provide safety assurance data. Proper use of these trailers is suitable for meeting applicable functional safety standards for a given industry. This document provides enough details for trailers that another document (likely SAE J1939-22) can incorporate these details into specific trailer formats. Accordingly, this document does not define the Type of Service (TOS) or Trailer Format (TF) values to use for these trailers, nor does it define the position of these trailers relative to other trailers that provide security assurance data.

Standard

Air Filter Element Test Method

2019-07-03

HISTORICAL

J1533_201907

This SAE test method establishes a uniform test procedure for determining the gravimetric (mass based) efficiency and pressure drop performance levels of operator enclosure panel type filters on off-road, self-propelled work machines used in earth moving, and forestry, as defined in SAE J1116 and for agricultural equipment as defined in ANSI/ASAE S390, and equipped with an operator enclosure with a powered fresh air system. ISO/TS 11155-1 may additionally be used, which describes the use of particle sizing devices to measure the fractional (particle size) efficiency of panel type filters for automotive cabin filter applications. Automotive cabin filters are similar to filters described in this procedure, and the ISO/TS 11155-1 test method is therefore directly applicable.

Standard

OPERATOR ENCLOSURE AIR FILTER ELEMENT TEST PROCEDURE

1993-06-14

HISTORICAL

J1533_199306

This SAE Recommended Practice establishes a uniform test procedure for determining performance levels of operator enclosure panel type air filters on off-road, self-propelled work machines used in construction, general-purpose industrial, agriculture, and forestry as defined in SAE J1116 and equipped with an operator enclosure with a powered fresh air system.

Standard

HYDRAULIC SYSTEM DIAGRAMS AND ASSOCIATED TABLES FOR MARINE VEHICLES

1991-04-01

CURRENT

J1780_199104

This document establishes the requirements for technical content and format of hydraulic system diagrams. This document does not establish configuration requirements, material, or performance requirements for any system or component identified herein.

Standard

Discriminating Back-Up Alarm System Standard

1999-06-01

CURRENT

J1741_199906

This SAE Standard describes methods for evaluating the performance of the systems detection device, the minimum detection areas behind the machine, the visual and audible information presented to the operator and ground personnel, and the systems fault detection requirements. Also included are operator system function tests and maintenance procedures.

Standard

Tire Size Differential - Articulated Wheel Loader

2019-11-20

CURRENT

J2204_201911

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

TIRE SIZE DIFFERENTIAL—ARTICULATED WHEEL LOADER

1994-05-01

HISTORICAL

J2204_199405

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric)

2019-05-10

CURRENT

J2295M_201905

This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.

Standard

Fasteners—Part Standard—Cap Screws, Hex Bolts, and Hex Nuts (Metric)

2006-06-21

HISTORICAL

J2295M_200606

This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.

Standard

SHIP SYSTEMS AND EQUIPMENT—FASTENERS—SELECTION AND IDENTIFICATION REQUIREMENTS

1996-04-01

HISTORICAL

J2280_199604

This SAE Standard provides a comprehensive list of requirements for the selection, identification, and control of metric and inch sized fasteners for use in shipboard applications for both shipbuilder installed joints and for use in shipboard components. The fastener selection requirements include the following: a Materials b Thread selection c Plating, coatings, and surface treatments d Locking devices and elements e Screw thread fastener inserts f Fastener part or identifying numbers g Identification markings

Standard

ANTILOCK BRAKE SYSTEMS ENERGY CONSUMPTION TEST PROCEDURE FOR AIR-BRAKED-EQUIPPED TRUCK TRACTORS, BUSES, TRAILERS, AND DOLLIES

1996-05-01

HISTORICAL

J2255_199605

This SAE Recommended Practice provides instructions and test procedures for measuring air consumption of air braked vehicles equipped with Antilock Brake Systems (ABS) used on highways.

Standard

Clutch Installation and Release Linkage Requirements for Truck and Bus Application

2017-11-03

CURRENT

J2407_201711

Although not limited to, these installations are normally used on trucks considered as Medium Duty (Class 6 and 7), as well as Heavy Duty (Class 8).

Standard

Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues

2007-11-15

HISTORICAL

J2641_200711

This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment and promote uniform testing.

Standard

Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues

2015-11-24

HISTORICAL

J2641_201511

This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment and promote uniform testing.

Standard

Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues

2021-05-13

CURRENT

J2641_202105

This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment, and promote uniform testing.

Standard

Drain and Fill Plug for use on Engines, Transmissions, and Axles

2003-07-29

HISTORICAL

J2606_200307

Drain and Fill plugs used on engines, transmissions, transfer cases and front and rear drive axles for class 5 – 8 vehicles.

Standard

Drain and Fill Plug for use on Engines, Transmissions, and Axles

2017-09-19

CURRENT

J2606_201709

Drain and Fill plugs used on engines, transmissions, transfer cases and front and rear drive axles for class 5 – 8 vehicles.

Standard

General Environmental Considerations for Marine Vehicles

2014-02-04

WIP

J1777

This Hydrospace Information Report (HIR) identifies the general environmental considerations for the design, development, evaluation, and testing of advanced surface craft, submersible vehicles, and other marine craft. This HIR provides criteria on the environmental limits within which marine vehicles, related components, and associated equipment should operate satisfactorily and reliably. This HIR is intended for use as a guide for the development of specific environmental requirements to be included in detailed specifications for marine vehicles and associated equipment. Specific requirements are in a state of continual change as our knowledge of the ocean environment increases. The ocean environment varies with location and time. Changes in the ocean environment can occur not only on a seasonal basis but also monthly, weekly, daily, and in some cases even hourly.