Refine Your Search

Topic

Author

Affiliation

Search Results

Collection

Autonomous Systems, 2017

2017-03-28
With a mandate in Europe for autonomous emergency braking systems, there is a development happening with radar and camera based systems to do collision mitigation. The challenges include robust object tracking, stationary object detection, reactions for false positives, etc. The developments and challenges in the collision mitigation technology are included in this collection.
Standard

J826/3 CAD Model of Legs and Back Hardware for SAE J826 3-D H-Point Machine

2014-10-16
WIP
J826/3
This document describes the CAD model data of legs and back hardware available from SAE for the HPM-1 three-dimensional H-point machine. The elements of the CAD model include the feet, lower and thighs as well as headroom probe and t-bar. Also included are datum points and lines, and calibration references. The intended purpose for this information is to provide a CAD reference for design and benchmarking as well as a calibration reference for the physical HPM-1 audits. The content and format of the data files that are available are also described. The actual CAD model files are included with this product and are provided in the following formats: CATIA v4 (without parametrics), CATIA v5 (without parametrics), IGES, and STEP.
Standard

Information Report for Hoists used with an Unoccupied Mobility Device

2010-02-02
WIP
J2930
This SAE Information Report establishes a uniform procedure for assuring the manufactured quality, installed utility and performance of automotive hoists designed to load and unload an unoccupied Mobility Device into or upon a personally licensed vehicle.
Standard

Integration of Battery Pack Systems in Bus Electrification

2016-08-01
WIP
J3125
a) Creation of a standard specific to integration of energy storage systems into electrification of buses of all types which comprehends safety, performance, life and cost considerations utilizing worldwide standards as references in order to maximize existing work. The document applies to both purpose built electric buses and retrofit electrified buses. b) Harmonization of these existing standards achieve specific objectives that provide guidance in effective and safe designs of electrificed buses which utilize battery pack systems as the energy storage device. c) Future Considerations
Standard

Air Conditioning Service Procedures for Heavy duty and Off-Highway work Machines using R-134a refrigerant

2016-09-12
WIP
J3126
This recommended practice provides technicians with safe and efficient techniques and general equipment recommendations for servicing Mobile Air Conditioning (MAC) systems in heavy duty and off-highway work machines. Presently, R-134a is the only approved refrigerant for use in mobile heavy duty and off-highway equipment and therefore this document primarily covers the servicing of R-134a systems. Since the technician may encounter other refrigerants a brief explanation on the identification safe handling of each refrigerant will be introduced.
Standard

Automated Driving Reference Architecture

2016-02-04
WIP
J3131
SAE J3131 defines an automated driving reference architecture that contains functional modules supporting future application interfaces for Levels 3 through 5 (J3016). The architecture will model scenario-driven functional and nonfunctional requirements, automated driving applications, functional decomposition of an automated driving system, and relevant functional domains (i.e., functional groupings). Domains include, but are not limited to, automated driving (i.e., automation replacing the human driver), by-wire and active safety, and those related to automated recovery from faults and system failures (e.g., system bringing the vehicle to a safe state). The architecture will address Tier 1 and Tier 2 functional groupings. The document will include one example instantiation being divides the functionality into two functionality groupings, and will detail the functional and information interface between the groups.
Standard

Automotive Cybersecurity Integrity Level (ACsIL)

2016-06-15
WIP
J3061-1
Review existing classification schemes from other industries and existing ideas that were presented at SAE or that may be being proposed or used in other organizations. Determine to use either an existing scheme or create a new classification scheme specific for the automotive industry from the existing or proposed methods or ideas (an integration or merging of the ideas). A Threat Analysis and Risk Assessment Method that would work with the classification scheme or from which we could map into a specific level in the cybersecurity integrity classification scheme a. This will require reviewing existing TARA methods and deciding on one or a tailored version of one Determine how to relate the ACSIL for safety-related threats to the ASIL from ISO 26262
Standard

Conformance Test Cases

2008-08-04
WIP
J2534/3
The purpose of this document is to define tests necessary to verify that an SAE J2534-1 interface device meets all the requirements specified in SAE J2534-1: Recommended Practice for Pass-Thru Vehicle Programming. Recent Activity Date Type
Standard

E/E Diagnostic Test Modes

2017-05-19
WIP
J1979-2
SAE J1979/ISO 15031-5 set includes the communication between the vehicle's OBD systems and test equipment implemented across vehicles within the scope of the legislated emissions-related OBD.
Standard

SAE-1001 Application Guide

2018-10-23
WIP
SAE1001/1
The Application Guide will provide additional information on the application and use of SAE1001, including different development approaches, specialties and domains, as well as scalability to different project and system scope. (SAE-1001/1 - Information Report)
X