Refine Your Search

Search Results

Viewing 1 to 13 of 13
Standard

Serial Data Communication Interface

2015-01-15
CURRENT
J2610_201501
The purpose of this SAE Information Report is to specify the requirements necessary to fully define the Serial Data Communication Interface (SCI) used in the reprogramming of emission-related powertrain Electronic Control Units (ECU) in Fiat Chrysler Automobiles (FCA) vehicles. It is intended to satisfy new regulations proposed by the federal U.S. Environmental Protection Agency (EPA) and California Air Resource Board (CARB) regulatory agencies regarding “pass-thru programming” of all On-Board Diagnostic (OBD) compliant emission-related powertrain devices. These requirements are necessary to provide independent automotive service organizations and after-market scan tool suppliers the ability to reprogram emission-related powertrain ECUs for all manufacturers of automotive vehicles. Specifically, this document details the SCI physical layer and SCI data link layer requirements necessary to establish communications between a diagnostic tester and an ECU.
Standard

SAE J1850 Verification Test Procedures

2006-06-05
CURRENT
J1699/1_200606
This SAE Recommended Practice recommends test methods, test procedures, and specific test parameters to help verify that vehicles and test tools can communicate using the SAE J1850. This document only verifies the portion of SAE J1850 that is used for OBD-II communications. The term “test tool” is synonymous with OBD-II Scan tool.
Standard

OBD-II Related SAE Specification Verification Test Procedures1

1998-01-01
HISTORICAL
J1699/2_199801
This SAE Recommended Practice recommends test methods, test procedures, and specific test parameters to help verify that vehicles and test tools can communicate using SAE J1962. These test procedures are to be used whenever SAE J1850 communication parameters need to be verified. However, all specific details for testing are not specified, e.g., sample size, environment, vibration, etc.
Standard

Diagnostic Connector

2015-09-11
HISTORICAL
J1962_201509
This document supersedes SAE J1962 200204, and is technically equivalent to ISO/DIS 15031-3: December 14, 2001. This document is intended to satisfy the requirements of an OBD connector as required by U.S. On-Board Diagnostic (OBD) regulations. The diagnostic connection specified in this document consists of two mating connectors, the vehicle connector and the external test equipment connector. This document specifies: a The functional requirements for the vehicle connector. These functional requirements are separated into four principal areas: connector location/access, connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits, b The functional requirements for the external test equipment connector. These functional requirements are separated into three principal areas: connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits.
Standard

Diagnostic Connector Equivalent to ISO/DIS 15031-3: December 14, 2001

2012-07-26
HISTORICAL
J1962_201207
This document supersedes SAE J1962 200204, and is technically equivalent to ISO/DIS 15031-3: December 14, 2001. This document is intended to satisfy the requirements of an OBD connector as required by U.S. On-Board Diagnostic (OBD) regulations. The diagnostic connection specified in this document consists of two mating connectors, the vehicle connector and the external test equipment connector. This document specifies: a The functional requirements for the vehicle connector. These functional requirements are separated into four principal areas: connector location/access, connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits, b The functional requirements for the external test equipment connector. These functional requirements are separated into three principal areas: connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits.
Standard

Diagnostic Connector Equivalent to ISO/DIS 15031-3:December 14, 2001

2002-04-30
HISTORICAL
J1962_200204
This document supersedes SAE J1962 FEB1998, and is technically equivalent to ISO/DIS 15031-3:December 14, 2001. This document is intended to satisfy the requirements of an OBD connector as required by U.S. On-Board Diagnostic (OBD) regulations. The diagnostic connection specified in this document consists of two mating connectors, the vehicle connector and the external test equipment connector. This document specifies: a. The functional requirements for the vehicle connector. These functional requirements are separated into four principal areas: connector location/access, connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits, b. The functional requirements for the external test equipment connector. These functional requirements are separated into three principal areas: connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits.
Standard

Diagnostic Connector

2016-07-12
CURRENT
J1962_201607
This document supersedes SAE J1962 200204, and is technically equivalent to ISO/DIS 15031-3: December 14, 2001. This document is intended to satisfy the requirements of an OBD connector as required by U.S. On-Board Diagnostic (OBD) regulations. The diagnostic connection specified in this document consists of two mating connectors, the vehicle connector and the external test equipment connector.
Standard

Diagnostic Connector Equivalent to Iso/Dis 15031-3:December 14, 2001

1995-01-01
HISTORICAL
J1962_199501
This document supersedes SAE J1962 FEB1998, and is technically equivalent to ISO/DIS 15031-3:December 14, 2001. The SAE J1962 diagnostic connector consists of two mating connectors, the vehicle connector and the test equipment connector. This document: a. Defines the functional requirements for the vehicle connector. These functional requirements are separated into three principal areas: connector location/access, connector design, and connector terminal assigments; b. Defines the functional requirements for the external test equipment connector. These functional requirementsare separated into two principal areas: connector design and connector terminal assignements. The scope of this document does not include the needs of long-term retention, such as in-flight recorder type applications. To ensure long-term retention, additional steps outside of the scope of this document must be taken.
Standard

Diagnostic Connector Equivalent to ISO/DIS 15031-3:December 14, 2001

1994-06-01
HISTORICAL
J1962_199406
This document supersedes SAE J1962 FEB1998, and is technically equivalent to ISO/DIS 15031-3:December 14, 2001. The SAE J1962 diagnostic connector consists of two mating connectors, the vehicle connector and the test equipment connector. This document: a. Defines the functional requirements for the vehicle connector. These functional requirements are separated into three principal areas: connector location/access, connector design, and connector terminal assigments; b. Defines the functional requirements for the external test equipment connector. These functional requirementsare separated into two principal areas: connector design and connector terminal assignements. The scope of this document does not include the needs of long-term retention, such as in-flight recorder type applications. To ensure long-term retention, additional steps outside of the scope of this document must be taken.
Standard

Diagnostic Connector Equivalent to ISO/DIS 15031-3:December 14, 2001

1992-06-01
HISTORICAL
J1962_199206
This document supersedes SAE J1962 200204, and is technically equivalent to ISO/DIS 15031-3: December 14, 2001. This SAE Recommended Practice: a. Defines the functional requirements for the vehicle electrical/electronic diagnostic connector. These functional requirements are separated into two principal areas: connector location/access and connector design; b. Establishes termainl assignments to conform to either of two categories: Standards or Manufacturer Discretionary. Rationale relative to intent is provided, where applicable, to minimize ambuiguity.
Standard

Diagnostic Connector Equivalent to ISO/DIS 15031-3:December 14, 2001

1993-06-01
HISTORICAL
J1962_199306
This document supersedes SAE J1962 FEB1998, and is technically equivalent to ISO/DIS 15031-3:December 14, 2001. The SAE J1962 diagnostic connector consists of two mating connectors, the vehicle connector and the test equipment connector. This document: a. Defines the functional requirements for the vehicle connector. These functional requirements are separated into three principal areas: connector location/access, connector design, and connector terminal assigments; b. Defines the functional requirements for the external test equipment connector. These functional requirementsare separated into two principal areas: connector design and connector terminal assignements. The scope of this document does not include the needs of long-term retention, such as in-flight recorder type applications. To ensure long-term retention, additional steps outside of the scope of this document must be taken.
Standard

E/E Data Link Security

2019-07-12
CURRENT
J2186_201907
This SAE Recommended Practice establishes a uniform practice for protecting vehicle components from "unauthorized" access through a vehicle data link connector (DLC). The document defines a security system for motor vehicle and tool manufacturers. It will provide flexibility to tailor systems to the security needs of the vehicle manufacturer. The vehicle modules addressed are those that are capable of having solid state memory contents accessed or altered through the data link connector. Improper memory content alteration could potentially damage the electronics or other vehicle modules; risk the vehicle compliance to government legislated requirements; or risk the vehicle manufacturer's security interests. This document does not imply that other security measures are not required nor possible.
Standard

E/E Data Link Security

2005-06-27
HISTORICAL
J2186_200506
This SAE Recommended Practice establishes a uniform practice for protecting vehicle components from "unauthorized" access through a vehicle data link connector (DLC). The document defines a security system for motor vehicle and tool manufacturers. It will provide flexibility to tailor systems to the security needs of the vehicle manufacturer. The vehicle modules addressed are those that are capable of having solid state memory contents accessed or altered through the data link connector. Improper memory content alteration could potentially damage the electronics or other vehicle modules; risk the vehicle compliance to government legislated requirements; or risk the vehicle manufacturer's security interests. This document does not imply that other security measures are not required nor possible.
X