Refine Your Search

Topic

Author

Affiliation

Search Results

Standard

Wheel Mounting Elements for Industrial and Agricultural Disc Wheels

1986-06-01
HISTORICAL
J714_198606
This SAE Recommended Practice includes wheel mounting elements subject to standardization in a series of industrial and agricultural disc wheels. The disc may be reversible or nonreversible and concave or convex (See Figure 1 and Table 1).
Standard

Vehicle Electromagnetic Immunity--On-Board Transmitter Simulation

2009-08-03
CURRENT
J551/12_200908
This part of SAE J551 specifies on-board transmitter simulation test methods and procedures for testing passenger cars and commercial vehicles. The electromagnetic disturbances considered in this part of SAE J551 are limited to continuous narrow band electromagnetic fields. SAE J551/1 specifies general, definitions, practical use, and basic principles of the test procedure.
Standard

Braking Performance--Asphalt Pavers

2006-01-04
HISTORICAL
J2118_200601
This SAE Standard specifies brake system performance and test criteria to enable uniform evaluation of the braking capability of self-propelled, rubber-tired asphalt pavers. Service, secondary, and parking brakes are included. Application This document applies to self-propelled, rubber-tired asphalt pavers as defined in 3.1 and to these same machines while in service.
Standard

R134a Refrigerant Charge Determination Test Method

2018-09-11
CURRENT
J3023_201809
The purpose of this document is to establish guidelines for determining the critical R134a refrigerant charge for off-road, self-propelled work machines as defined in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390. It will develop a minimum to maximum refrigerant charge range in which the HVAC system can maintain proper operation. Operating conditions and characteristics of the equipment will influence the optimum charge. Since these conditions and characteristics vary greatly from one application to another, careful consideration should be taken to determine the optimum R134a refrigerant charge for the HVAC system.
Book

Insight: Simulation Tools for Engine Design (DVD)

2016-04-08
In "Simulation Tools for Engine Design" engineers from Ricardo Software discuss the use of simulation software in new powertrain development. Another engineer, this time from General Motors, talks about how simulation tools helped them solve the challenge of fuel flow reversion while designing the new turbocharged Cadillac V6 engine. This episode highlights: • The challenge of simulating complex and combined systems in one vehicle • An example of how a library of components in a software package can be chosen to form a specific system and analyzed • How computational fluid dynamics simulation tools were used to help redesign a new planum
Standard

Acceleration Factors

2014-09-12
CURRENT
SSB1_003A
This document is an annex to EIA Engineering Bulletin SSB-1, Guidelines for Using Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugged Applications (the latest revision). This document provides reference information concerning acceleration factors commonly used by device manufacturers to model failure rates in conjunction with statistical reliability monitoring. These acceleration factors are frequently used by OEMs in conjunction with physics of failure reliability analysis to assess the suitability of plastic encapsulated microcircuits and semiconductors for specific end use applications.
Book

Electronic Transmission Controls

2000-06-10
The evolution of the automotive transmission has changed rapidly in the last decade, partly due to the advantages of highly sophisticated electronic controls. This evolution has resulted in modern automatic transmissions that offer more control, stability, and convenience to the driver. Electronic Transmission Controls contains 68 technical papers from SAE and other international organizations written since 1995 on this rapidly growing area of automotive electronics. This book breaks down the topic into two sections. The section on Stepped Transmissions covers recent developments in regular and 4-wheel drive transmissions from major auto manufacturers including DaimlerChrysler, General Motors, Toyota, Honda, and Ford. Technology covered in this section includes: smooth shift control; automatic transmission efficiency; mechatronic systems; fuel saving technologies; shift control using information from vehicle navigation systems; and fuzzy logic control.
White Paper

REDUCING DOWNTIME THROUGH THE USE OF PREDICTIVE ANALYTICS AND TECHNICAL TRAINING ADVANCEMENTS

2018-01-05
WP-0007
The exponential increase in the number of aircraft and air travelers has triggered new innovations aimed to make airline services more reliable and consumer friendly. Quick and efficient maintenance actions with minimum downtime are the need of the hour. Another major challenge is ensuring maintenance personnel are trained effectively; technology like augmented reality and Virtual Maintenance Trainers (VMTs) may provide safe and efficient training in lieu of live, instructor-led arrangements. And while traditional User/Maintenance Manuals provide useful information when dealing with simple machines, when dealing with complex systems of systems and miniaturized technologies, like unmanned aerial vehicles (UAVs), new technologies like augmented reality can rapidly and effectively support the maintenance operations.
Standard

Control Locations for Off-Road Work Machines

1982-07-01
J898_198207
This SAE Standard applies to Construction, General Purpose Industrial, Agricultural, Forestry, and Specialized Mining categories of off-road, self-propelled work machines, as defined in SAE J1116. Powered industrial trucks and agricultural equipment, other than the basic agricultural tractor, are excluded from the scope of this document. The document defines positions for convenient placement of hand- and foot-operated controls derived from the overlapping reach capability of large and small operators. The large operator approximates the 95th percentile male, and small operator approximates the 5th percentile female of the U.S. population. This document defines zones in which controls used by a seated operator would ordinarily be placed, and is intended as a guide for the design of the operator compartment controls. Constraints peculiar to individual machine or user applications may require modification to these defined zones.
Standard

Control Locations for Off-Road Work Machines

1987-10-01
J898_198710
This SAE Standard applies to Construction, General Purpose Industrial, Agricultural, Forestry, and Specialized Mining categories of off-road, self-propelled work machines, as defined in SAE J1116. Powered industrial trucks and agricultural equipment, other than the basic agricultural tractor, are excluded from the scope of this document. The document defines positions for convenient placement of hand- and foot-operated controls derived from the overlapping reach capability of large and small operators. The large operator approximates the 95th percentile male, and small operator approximates the 5th percentile female of the U.S. population. This document defines zones in which controls used by a seated operator would ordinarily be placed, and is intended as a guide for the design of the operator compartment controls. Constraints peculiar to individual machine or user applications may require modification to these defined zones.
Collection

Multi-Dimensional Engine Modeling, 2018

2018-04-03
This collection covers advances in the development and application of models and tools involved in multi-dimensional engine modeling: advances in chemical kinetics, combustion and spray modeling, turbulence, heat transfer, mesh generation, and approaches targeting improved computational efficiency. Papers employing multi-dimensional modeling to gain a deeper understanding of processes related to turbulent transport, transient phenomena, and chemically reacting, two-phase flows are included in this collection.
X