Refine Your Search

Search Results

Viewing 1 to 12 of 12
Standard

SAE J1850 Verification Test Procedures

2006-06-05
CURRENT
J1699/1_200606
This SAE Recommended Practice recommends test methods, test procedures, and specific test parameters to help verify that vehicles and test tools can communicate using the SAE J1850. This document only verifies the portion of SAE J1850 that is used for OBD-II communications. The term “test tool” is synonymous with OBD-II Scan tool.
Standard

OBD-II Communications Anomaly List

2014-04-09
CURRENT
J1699/4_201404
To define a list of anomalies related to OBD Communications. Misinterpretations of various OBD Communications Standards and Recommended Practices have resulted in OBD “no-communications” situations in the field. This Information Report identifies the most prevalent of these.
Standard

OBD-II Related SAE Specification Verification Test Procedures1

1998-01-01
HISTORICAL
J1699/2_199801
This SAE Recommended Practice recommends test methods, test procedures, and specific test parameters to help verify that vehicles and test tools can communicate using SAE J1962. These test procedures are to be used whenever SAE J1850 communication parameters need to be verified. However, all specific details for testing are not specified, e.g., sample size, environment, vibration, etc.
Standard

Diagnostic Connector

2015-09-11
HISTORICAL
J1962_201509
This document supersedes SAE J1962 200204, and is technically equivalent to ISO/DIS 15031-3: December 14, 2001. This document is intended to satisfy the requirements of an OBD connector as required by U.S. On-Board Diagnostic (OBD) regulations. The diagnostic connection specified in this document consists of two mating connectors, the vehicle connector and the external test equipment connector. This document specifies: a The functional requirements for the vehicle connector. These functional requirements are separated into four principal areas: connector location/access, connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits, b The functional requirements for the external test equipment connector. These functional requirements are separated into three principal areas: connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits.
Standard

Diagnostic Connector Equivalent to ISO/DIS 15031-3: December 14, 2001

2012-07-26
HISTORICAL
J1962_201207
This document supersedes SAE J1962 200204, and is technically equivalent to ISO/DIS 15031-3: December 14, 2001. This document is intended to satisfy the requirements of an OBD connector as required by U.S. On-Board Diagnostic (OBD) regulations. The diagnostic connection specified in this document consists of two mating connectors, the vehicle connector and the external test equipment connector. This document specifies: a The functional requirements for the vehicle connector. These functional requirements are separated into four principal areas: connector location/access, connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits, b The functional requirements for the external test equipment connector. These functional requirements are separated into three principal areas: connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits.
Standard

OBD II Scan Tool — Equivalent to ISO/DIS 15031-4:December 14, 2001

2002-04-30
CURRENT
J1978_200204
This SAE Recommended Practice supersedes SAE J1978 FEB1998, and is technically equivalent to ISO/DIS 15031-4:December 14, 2001. This document is intended to satisfy the requirements of an OBD scan tool as required by U.S. On-Board Diagnostic (OBD) regulations. The document specifies: a A means of establishing communications between an OBD-equipped vehicle and external test equipment, b A set of diagnostic services to be provided by the external test equipment in order to exercise the services defined in SAE J1979, c Conformance criteria for the external test equipment.
Standard

OBD II Scan Tool

1998-02-01
HISTORICAL
J1978_199802
This SAE Recommended Practice defines the requirements of OBD II scan tools, i.e. test equipment that will interface with vehicle modules in support of the OBD II diagnostic requirements. It covers the required capabilities of and conformance criteria for OBD II scan tools.
Standard

Enhanced E/E Diagnostic Test Modes

2008-10-02
CURRENT
J2190_200810
This SAE Recommended Practice describes the implementation of Enhanced Diagnostic Test Modes, which are intended to supplement the legislated Diagnostic Test Modes defined in SAE J1979. Modes are defined for access to emission related test data beyond what is included in SAE J1979, and for non-emission related data. This document describes the data byte values for diagnostic messages transmitted between diagnostic test equipment, either on-vehicle or off-vehicle, and vehicle electronic control modules. No distinction is made between test modes for emission related and non-emission related diagnostics. These messages can be used with a diagnostic serial data link such as described in SAE J1850 or ISO 9141-2. For each test mode, this document includes a functional description of the test mode, request and report message data byte content, and an example if useful for clarification.
Standard

E/E Diagnostic Test Modes

2017-05-18
WIP
J1979
SAE J1979/ISO 15031-5 set includes the communication between the vehicle's OBD systems and test equipment implemented across vehicles within the scope of the legislated emissions-related OBD.
Standard

E/E Diagnostic Test Modes

2017-02-16
CURRENT
J1979_201702
SAE J1979/ISO 15031-5 set includes the communication between the vehicle’s OBD systems and test equipment implemented across vehicles within the scope of the legislated emissions-related OBD. To achieve this, it is based on the Open Systems Interconnection (OSI) Basic Reference Model in accordance with ISO/IEC 7498-1 and ISO/IEC 10731, which structures communication systems into seven layers.
Standard

J1979-DA, Digital Annex of E/E Diagnostic Test Modes

2019-05-08
CURRENT
J1979DA_201905
On-Board Diagnostic (OBD) regulations require passenger cars, and light and medium duty trucks, to support communication of a minimum set of diagnostic information to off-board “generic” test equipment. This document specifies the diagnostic data which may be required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. SAE J1979 was originally developed to meet U.S. OBD requirements for 1996 and later model year vehicles. ISO 15031 5 was based on SAE J1979 and was intended to combine the U.S. requirements with European OBD requirements for 2000 and later model year vehicles.
Standard

J1979-DA, Digital Annex of E/E Diagnostic Test Modes

2011-10-10
HISTORICAL
J1979DA_201110
On-Board Diagnostic (OBD) regulations require passenger cars, and light and medium duty trucks, to support communication of a minimum set of diagnostic information to off-board “generic” test equipment. This document specifies the diagnostic data which may be required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. SAE J1979 was originally developed to meet U.S. OBD requirements for 1996 and later model year vehicles. ISO 15031-5 was based on SAE J1979 and was intended to combine the U.S. requirements with European OBD requirements for 2000 and later model year vehicles.
X