Search Results

Fuel-derived deposits on injectors and elsewhere in engines can severely impair engine performance. A laboratory test procedure was developed to produce thin deposit films from oxidized fuel on steel. The deposit films were analyzed using ESCA (XPS) and depth profiling with Ar i-ons. The deposits were carbonaceous in nature with lesser amounts of oxygen, and small amounts of sulfur and nitrogen. The total sulfur concentration in the deposits was approximately five-ten times higher than the concentration of sulfur in the original gasoline. Ion bombardment preferentially removed oxygen from the deposit layer, revealing that sulfur in the deposits was in the form of oxygenated compounds (RSO2 R, RSO2OR, RSO2OR, RSO2OSO2 R) and removal of oxygen converted them to lesser or non-oxygen-containing compounds (RSR, RSOR, RSSR, RSSO2 R). Fuel samples were spiked with two sulfur-containing chemicals, thioanisole and thianaphthene.

A laboratory test procedure was developed, and used to evaluate the deposit-forming tendencies of liquid fuels on a metal surface, and to identify deposit precursors in fuel. The impetus for this work was deposit formation in multiport fuel injection(MPFI) systems. Results from our laboratory test correlated well with those from engine dynamometer tests. Deposit formation is shown to be caused by the oxidation, condensation, and precipitation of unstable hydrocarbon species in the fuel. The immediate precursors for deposit formation were determined, based on liquid chromatographic separation and GC/MS analysis, to be oxygenated hydrocarbons included in the fuel.

This paper presents an overview of techniques for measuring friction using bench tests and fired engines. The test methods discussed have been developed to provide efficient, yet realistic, assessments of new component designs, materials, and lubricants for in-cylinder and overall engine applications. A Cameron-Plint Friction and Wear Tester was modified to permit ring-in-piston-groove movement by the test specimen, and used to evaluate a number of cylinder bore coatings for friction and wear performance. In a second study, it was used to evaluate the energy conserving characteristics of several engine lubricant formulations. Results were consistent with engine and vehicle testing, and were correlated with measured fuel economy performance. The Instantaneous IMEP Method for measuring in-cylinder frictional forces was extended to higher engine speeds and to modern, low-friction engine designs.