Refine Your Search

Search Results

Standard

Lift Capacity Calculation and Test Procedure-Pipelayer and Sideboom

1979-03-01
HISTORICAL
J743B_197903
This SAE Standard describes a method to calculate and a test procedure to validate rated lift capacity as presented in commercial literature for pipelayers and tractors or loaders (wheel or crawler), equipped with a hydraulic or mechanically operated sideboom. Rated lift capacity considers hoist mechanism limits, tipping loads, and rope factor. After the lift capacity is validated by testing, a reduction factor is applied to establish the rated lift capacity for the specific pipelayer or sideboom configuration.
Standard

Lift Capacity Calculation and Test Procedure-Pipelayer and Sideboom

1977-06-01
HISTORICAL
J743A_197706
This SAE Standard describes a method to calculate and a test procedure to validate rated lift capacity as presented in commercial literature for pipelayers and tractors or loaders (wheel or crawler), equipped with a hydraulic or mechanically operated sideboom. Rated lift capacity considers hoist mechanism limits, tipping loads, and rope factor. After the lift capacity is validated by testing, a reduction factor is applied to establish the rated lift capacity for the specific pipelayer or sideboom configuration.
Standard

Loading Ability Test Procedure - Scrapers

2011-10-27
CURRENT
J764_201110
This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.)
Standard

Loading Ability Test Procedure - Scrapers

1977-06-01
HISTORICAL
J764_197706
This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.) The purpose of the scraper loading ability test is to determine the amounts of specified material that can be loaded with specified times and to express the data as a load-growth curve. The amount loaded is measured in kilograms and should be converted to volume by means of unit mass for reporting purposes.
Standard

Loading Ability Test Procedure--Scrapers

1995-08-01
HISTORICAL
J764_199508
This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport materials. The purpose of the scraper loading ability test is to determine the amounts of specified material that can be loaded with specified times and to express the data as a load-growth curve. The amount loaded is measured in kilograms and should be converted to volume by means of unit mass for reporting purposes.
Standard

Loading Ability Test Procedure--Scrapers

2006-02-05
HISTORICAL
J764_200602
This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport materials. The purpose of the scraper loading ability test is to determine the amounts of specified material that can be loaded with specified times and to express the data as a load-growth curve. The amount loaded is measured in kilograms and should be converted to volume by means of unit mass for reporting purposes.
Standard

Loading Ability Test Procedure - Scrapers

1985-11-01
HISTORICAL
J764_198511
This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.) The purpose of the scraper loading ability test is to determine the amounts of specified material that can be loaded with specified times and to express the data as a load-growth curve. The amount loaded is measured in kilograms and should be converted to volume by means of unit mass for reporting purposes.
Standard

Lift Capacity Calculation and Test Procedure-Pipelayer and Sideboom

2011-12-08
CURRENT
J743_201112
This SAE Standard describes a method to calculate and a test procedure to validate rated lift capacity as presented in commercial literature for pipelayers and tractors or loaders (wheel or crawler), equipped with a hydraulic or mechanically operated sideboom. Rated lift capacity considers hoist mechanism limits, tipping loads, and rope factor. After the lift capacity is validated by testing, a reduction factor is applied to establish the rated lift capacity for the specific pipelayer or sideboom configuration.
Standard

Drawbar Test Procedure for Construction, Forestry and Industrial Machines

1986-05-01
HISTORICAL
J872_198605
This SAE Standard specifies a test method to measure the drawbar pull performance of self-propelled construction, forestry, and industrial machines and their combinations with mounted and/or trailed equipment, with or without payload, as listed in SAE J1116. It covers the following criteria measured against travel speed: drawbar pull, drawbar power, and wheel or track slip.
Standard

Drawbar Test Procedure for Construction, Forestry, and Industrial Machines

2003-05-08
CURRENT
J872_200305
This SAE Standard specifies a test method to measure the drawbar pull performance of self-propelled construction, forestry, and industrial machines and their combinations with mounted and/or trailed equipment, with or without payload, as listed in SAE J1116. It covers the following criteria measured against travel speed: drawbar pull, drawbar power, and wheel or track slip.
Standard

Machine Slope Operation Test Code

2003-05-12
CURRENT
J897_200305
This SAE Standard applies to off-road self-propelled construction, forestry and industrial machines as listed in categories 1, 2, and 4 of SAE J1116. Purpose This Standard provides a field procedure to determine the ability of a machine to operate statically and dynamically on sloping surfaces. Depending upon the objective of the test, any item listed as specified is to be selected at the discretion of either the manufacturer, the test agency, the owner, or a combination of these parties.
Standard

Machine Slope Operation Test Code

1978-05-01
HISTORICAL
J897_197805
This SAE Standard applies to off-road self-propelled construction, forestry and industrial machines as listed in categories 1, 2, and 4 of SAE J1116. Purpose This Standard provides a field procedure to determine the ability of a machine to operate statically and dynamically on sloping surfaces. Depending upon the objective of the test, any item listed as specified is to be selected at the discretion of either the manufacturer, the test agency, the owner, or a combination of these parties.
X