Refine Your Search

Topic

Author

Affiliation

Search Results

Standard

J826/3 CAD Model of Legs and Back Hardware for SAE J826 3-D H-Point Machine

2014-10-16
WIP
J826/3
This document describes the CAD model data of legs and back hardware available from SAE for the HPM-1 three-dimensional H-point machine. The elements of the CAD model include the feet, lower and thighs as well as headroom probe and t-bar. Also included are datum points and lines, and calibration references. The intended purpose for this information is to provide a CAD reference for design and benchmarking as well as a calibration reference for the physical HPM-1 audits. The content and format of the data files that are available are also described. The actual CAD model files are included with this product and are provided in the following formats: CATIA v4 (without parametrics), CATIA v5 (without parametrics), IGES, and STEP.
Standard

Information Report for Hoists used with an Unoccupied Mobility Device

2010-02-02
WIP
J2930
This SAE Information Report establishes a uniform procedure for assuring the manufactured quality, installed utility and performance of automotive hoists designed to load and unload an unoccupied Mobility Device into or upon a personally licensed vehicle.
Standard

Air Conditioning Service Procedures for Heavy duty and Off-Highway work Machines using R-134a refrigerant

2016-09-12
WIP
J3126
This recommended practice provides technicians with safe and efficient techniques and general equipment recommendations for servicing Mobile Air Conditioning (MAC) systems in heavy duty and off-highway work machines. Presently, R-134a is the only approved refrigerant for use in mobile heavy duty and off-highway equipment and therefore this document primarily covers the servicing of R-134a systems. Since the technician may encounter other refrigerants a brief explanation on the identification safe handling of each refrigerant will be introduced.
Standard

Standard Practice for Habitability

2018-08-14
WIP
SAE1007
The Habitability standard practice identifies the recommended approach for conducting Habitability activities in support of system acquisition programs. This standard covers all aspects of the physical environment that people inhabit, for work, or other purpose. It includes adequate space and environmental/temperature controls and, if appropriate, requirements for personnel services (e.g., medical, dental and mess) and living conditions (e.g., berthing and personal hygiene) that have a direct impact on meeting or sustaining system performance/effectiveness or that have such an adverse impact on safety, health, comfort, quality of life and morale that recruitment or retention is degraded. It includes analysis, modeling and simulation, design, and verification of Habitability requirements and processes.
Standard

Design For Maintainer (DFM) Process Standard

2018-08-14
WIP
SAE1009
The Design for Maintainer (DFM) standard identifies the recommended approach for conducting Design for Maintainability activities in support of system acquisition programs. The standard identifies general requirements and processes of a successful DFM program during concept and design development to ensure the lowest possible ownership costs. This standard provides specific detailed contractor requirements for DFM activities inclusive of the Human Engineering domain. The standard is consistent with MIL-STD-46855 and SAE 6906 Human Systems Integration. And DFM standard practices support performance of activities in coordination with other associated disciplines such as maintainability, supportability, and integrated logistics.
Standard

Standard Practice for Force Protection and Survivability (FP&S)

2018-08-14
WIP
SAE1008
The Protection and Survivability (FP&S) standard practice identifies the recommended approach for conducting FP&S activities in support of system acquisition programs. This standard covers FP&S processes throughout system conceptualization, design, development, verification, production, use and disposal. FP&S includes analysis, modeling and simulation, design and verification of system-related survivability characteristics and processes designed to protect personnel from direct threats and accidents, including primary and secondary effects from the events.
Standard

Standard Practice for Personnel

2018-08-14
WIP
SAE1006
The Personnel standard practice identifies the recommended approach for conducting Personnel activities in support of system acquisition programs. This standard covers Personnel processes throughout system conceptualization, design, development, verification, production, use and disposal. Personnel addresses skills, grades, aptitudes, physical attributes and education and training backgrounds of military and civilian personnel required to operate, maintain, train and support the system equipment and associated support equipment and facilities in its operational environment. It includes analysis, modeling and simulation, design support and verification of Personnel estimates and requirements.
Standard

Off-Road Self-Propelled Work Machines Operator enclosure environment Part 4:Heating, ventilating and air conditioning (HVAC) test method and performance

2014-09-16
WIP
J3078/4
J3078/4 specifies a uniform test method for measuring the contribution to operator environmental temperature provided by a heating, ventilating and air conditioning system operating in a specific ambient environment. The method might not determine the complete climatic environment of the operator since this is also affected by heat load from sources other than those on the machine, for example solar heating. J3708/6 is to be used in conjunction with J3078/4 to determine more accurately the complete heat loading on the operator enclosure. Minimum performance levels for the machine’s operator enclosure heating, ventilating and air conditioning systems are established in J3708/4.
Standard

Camera Monitor Systems Test Protocols and Performance Requirements

2017-09-13
WIP
J3155
This SAE Recommended Practice provides test protocols with performance requirements for Camera Monitor Systems to replace existing statutorily required inside and outside rear-view mirrors for US market road vehicles. This practice expands specific technical content while retaining harmonization with the FMVSS 111 Rear Visibility standard, and other international standards. This is accomplished by defining required roadway fields of view as specific fields of view (FOV) displayed inside the vehicle. Specific testing protocols and/or specifications are added to enhance ease of use using straightforward language and any specifications are intended to be independent of different camera and display technologies unless otherwise explicitly stated.
Standard

Vehicle Sound Measurement at Low Speeds

2009-01-16
WIP
J2889
The Vehicle Sound for Pedestrians Subcommittee of the SAE Safety and Human Factors Committee is developing a test procedure to determine the sound output of electric and hybrid-electric powertrain vehicles at certain low-speed conditions. Establishing a consistent method of measuring the sound output of these vehicles will facilitate further study into the need for additional measures to alert pedestrians to the presence of these vehicles in traffic. This test procedure could also become industry practice should it later be deemed necessary to record the sound output of certain vehicles in low speed traffic conditions where vehicles, pedestrians and other road users are co-mingled.
Standard

Motor Vehicle Seating Glossary

2010-06-03
WIP
J2897
This document provides technology, terminology, and procedural definitions common in Motor Vehicle seat design and testing.
Collection

High Efficiency IC Engines, 2013

2013-04-09
The 24 papers in this technical paper collection focus on technologies such as advanced and partially mixed combustion, cooled EGR boosting, ignition and direct injection technologies, pressure boosting, intelligent combustion, thermal efficiency including waste heat recovery, fully variable valvetrains.
Collection

High Efficiency IC Engines Concepts, 2014

2014-04-01
This technical paper collection focuses on technologies such as advanced and partially mixed combustion, cooled EGR boosting, ignition and direct injection technologies, pressure boosting, intelligent combustion, thermal efficiency, fully variable valvetrains, and other new and developing technologies.
Book

Fuel Efficiency: Racing Toward CAFE 2025 (DVD)

2015-04-15
"Spotlight on Design" features video interviews and case study segments, focusing on the latest technology breakthroughs. Viewers are virtually taken to labs and research centers to learn how design engineers are enhancing product performance/reliability, reducing cost, improving quality, safety or environmental impact, and achieving regulatory compliance. Fuel efficiency, or simply put, how to get more mileage out of the same amount of fuel has become one of the main goals to be achieved by new automotive technologies in the future, thanks in part to new government regulations. In the episode "Fuel Efficiency: Racing toward CAFE 2025" (21:24) AVL engineers show simulation and testing being used to design more fuel efficient vehicles, including the equipment that actually analyzes fuel economy.
X