Standard
STEEL, NITRIDING .65 Ni 1 Cr 1 Mo
1946-04-01
HISTORICAL
AMS6480
Search Results
Standard
STEEL TUBING (WELDED) Chromium Molybdenum (.27 - .33 Carbon) (Normalized)
1942-06-01
HISTORICAL
AMS6510
Standard
STEEL Nickel Molybdenum
1942-03-01
HISTORICAL
AMS6315A
Standard
STEEL 1.8 Ni - .25 Mo (.38 - .43C) Heat Treated (105,000 TS)
1945-07-01
HISTORICAL
AMS6315B
Standard
AS6369 Seal
1956-04-06
CURRENT
AS6369-3
No scope available.
Standard
Electronic Design Interchange Format Version 200
2016-05-31
CURRENT
EIA548
Standard
Rubber: Ethylene Propylene (EPDM or EPR), Ozonated and Chlorinated Water Resistant, NSF-61 Compliant, 75 to 85 Type M Hardness, For Seals in Potable Water Systems
2020-03-26
WIP
AMS7288
This document will compile and harmonize the performance requirements of elastomeric seals in potable water systems. Suppliers who have certifications equivalent to NSF 61 can qualify to produce both the ethylene propylene rubber compound and O-rings.
Standard
Reciprocating Sealing Surface Finishes in Fluid Power Systems
2022-05-13
WIP
ARP6010
This document provides recommendations for obtaining a finish and texture for reciprocating sealing surfaces in fluid power systems to improve dynamic seal performance. Recommendations on how to specify and measure the surface finish are also provided.
Standard
ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
1995-05-01
HISTORICAL
AMS4128B
This specification covers an aluminum alloy in the form of bars and rods 0.500 in. (12.50 mm) and over in nominal diameter or least distance between parallel sides.
Standard
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
2021-06-28
CURRENT
AMS4128E
This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see 8.7).
Standard
Silicone Resin, Elastomeric, Transparent Room Temperature Cure
2001-04-09
HISTORICAL
AMS3370A
This specification covers a silicone resin in the form of a two-component liquid.
Standard
SILICONE RESIN, ELASTOMERIC, TRANSPARENT ROOM TEMPERATURE CURE
1968-11-01
HISTORICAL
AMS3370
Standard
Silicone Resin, Elastomeric, Transparent Room Temperature Cure
2012-01-17
CURRENT
AMS3370B
This specification covers a silicone resin in the form of a two-component liquid.
Standard
Insulation, Sound and Thermal Resin-Bonded Glass Fiber, Medium Filament
2015-05-13
CURRENT
AMS3676D
This specification covers resin-bonded glass fibers in the form of felted pads, flat or in rolls.
Standard
INSULATION, SOUND AND THERMAL Resin-Bonded Glass Fiber, Medium Filament
1991-10-01
HISTORICAL
AMS3676B
This specification covers resin-bonded glass fibers in the form of felted pads, flat or in rolls.
Standard
ADHESIVE, ELECTRICALLY CONDUCTIVE Silver - Organic Resin
1977-01-01
HISTORICAL
AMS3681A
This specification covers an electrically-conductive adhesive supplied as two components; a paste of silver-filled, epoxy-base adhesive and a separate curing agent which may be paste or liquid.
Standard
ADHESIVE, ELECTRICALLY CONDUCTIVE Silver - Organic Resin
2011-08-12
HISTORICAL
AMS3681B
This specification covers an electrically-conductive adhesive supplied as two components; a paste of silver-filled, epoxy-base adhesive and a separate curing agent which may be paste or liquid.
Standard
ADHESIVE FILM, HUMIDITY-RESISTANT For Sandwich Panels, -55° to +95° C (-67° to +203° F)
1974-03-01
HISTORICAL
AMS3687
This specification covers a high-humidity-resistant, modified epoxy adhesive in the form of film.
Standard
ADHESIVE FILM, HUMIDITY-RESISTANT, EPOXY For Sandwich Panels, -55° To +95°C (-65° To +200°F)
2011-08-09
HISTORICAL
AMS3687A
This specification covers a high-humidity-resistant, modified epoxy adhesive in the form of film supplied as rolls or sheets.
Standard
Adhesive Film, Humidity-Resistant, Epoxy For Sandwich Panels, −55 to +95 °C (65 to +200 °F)
2016-11-10
CURRENT
AMS3687C
This specification covers a high-humidity-resistant, modified epoxy adhesive in the form of film supplied as rolls or sheets.
