Refine Your Search

Topic

Search Results

Standard

Nomenclature--Crawler Tractor

1977-06-01
HISTORICAL
J727B_197706
This Standard provides provides names of major components peculiar to crawler tractors as defined in SAE J1057a (June, 1975). Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Nomenclature--Crawler Tractor

2002-02-21
CURRENT
J727_200202
This Standard provides provides names of major components peculiar to crawler tractors as defined in SAE J1057a (June, 1975). Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature-Scrapers

1990-07-01
HISTORICAL
J728_199007
This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Scrapers

1984-07-01
HISTORICAL
J728_198407
This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Nomenclature-Crawler Tractor

1986-01-01
HISTORICAL
J727_198601
This Standard provides provides names of major components peculiar to crawler tractors as defined in SAE J1057a (June, 1975). Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Loader

1975-06-01
HISTORICAL
J731D_197506
This standard includes names of major components and parts peculiar to this type machine. The illustrations are descriptive of the principles and are not intended to include all existing commercial machines. Refer to SAE J1057 (July, 1973)?Identification Terminology of Earthmoving Machines for machine type.
Standard

Component Nomenclature--Loader

1977-10-01
HISTORICAL
J731D_197710
This standard includes names of major components and parts peculiar to this type machine. The illustrations are descriptive of the principles and are not intended to include all existing commercial machines. Refer to SAE J1057 (July, 1973)?Identification Terminology of Earthmoving Machines for machine type.
Standard

Component Nomenclature--Dumper Trailer

1974-12-01
HISTORICAL
J734C_197412
This SAE Standard provides names of major components peculiar to the trailer portion of certain configurations of dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Hole Spacing for Scraper and Dozer Cutting Edges

1989-08-01
HISTORICAL
J737_198908
This standard is intended for cutting edge sections used on: a. Tractor-scrapers as described in SAE J1057 and J728 b. Dozers as described in SAE J729. These cutting edges are further defined in SAE J738 for cross section and SAE J740 and J1580 for hole conformation. (Note: Some inch dimentions in this standard are not equivalent to the corresponding millimeter figures because values which are widely used have been adapted. This standard specifies hole placement along with length and width of the cutting edge.
Standard

Hole Spacing for Scraper and Dozer Cutting Edges

1983-05-01
HISTORICAL
J737_198305
This standard is intended for cutting edge sections used on: a. Tractor-scrapers as described in SAE J1057 and J728 b. Dozers as described in SAE J729. These cutting edges are further defined in SAE J738 for cross section and SAE J740 and J1580 for hole conformation. (Note: Some inch dimentions in this standard are not equivalent to the corresponding millimeter figures because values which are widely used have been adapted. This standard specifies hole placement along with length and width of the cutting edge.
Standard

Hole Spacing for Scraper and Dozer Cutting Edges

2007-08-30
CURRENT
J737_200708
This standard is intended for cutting edge sections used on: a. Tractor-scrapers as described in SAE J1057 and J728 b. Dozers as described in SAE J729. These cutting edges are further defined in SAE J738 for cross section and SAE J740 and J1580 for hole conformation. (Note: Some inch dimentions in this standard are not equivalent to the corresponding millimeter figures because values which are widely used have been adapted. This standard specifies hole placement along with length and width of the cutting edge.
Standard

Cutting Edge-Curved Grader

2006-02-05
HISTORICAL
J739_200602
This SAE Standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. (See Figure 1 and Table 1.) Hole conformation is further defined in SAE J740 and J1580. This document specifes hole placement along the length and width of the cutting edge and dimensions for cutting edge cross sections. See Table 1.
Standard

Hole Spacing for Scraper and Dozer Cutting Edges

2006-02-01
HISTORICAL
J737_200602
This standard is intended for cutting edge sections used on: a. Tractor-scrapers as described in SAE J1057 and J728 b. Dozers as described in SAE J729. These cutting edges are further defined in SAE J738 for cross section and SAE J740 and J1580 for hole conformation. (Note: Some inch dimentions in this standard are not equivalent to the corresponding millimeter figures because values which are widely used have been adapted. This standard specifies hole placement along with length and width of the cutting edge.
Standard

Cutting Edge-Curved Grader

2007-08-30
CURRENT
J739_200708
This SAE Standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. (See Figure 1 and Table 1.) Hole conformation is further defined in SAE J740 and J1580. This document specifes hole placement along the length and width of the cutting edge and dimensions for cutting edge cross sections. See Table 1.
Standard

Cutting Edge-Curved Grader

1991-06-01
HISTORICAL
J739_199106
This SAE Standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. (See Figure 1 and Table 1.) Hole conformation is further defined in SAE J740 and J1580. This document specifes hole placement along the length and width of the cutting edge and dimensions for cutting edge cross sections. See Table 1.
Standard

Countersunk Square Holes for Cutting Edges and End Bits

1986-07-01
HISTORICAL
J740_198607
This standard specifies the principal shapes and dimensions for countersunk square holes. To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further in SAE J737, J739 and J1304. End bits are further defined in SAE J63.
Standard

Countersunk Square Holes for Cutting Edges and End Bits

2011-10-25
CURRENT
J740_201110
To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further defined in SAE J737, J739 and J1304. End bits are further defined in SAE J63. 1 When section thickness exceeds A in drawing 1 (Figure 2) (countersunk one side) or B in drawing 4 (countersunk both sides), use counterbore with diameter D, as shown in cross section drawings 2, 5 and 6, or extended countersink C, as shown in cross section drawings 3 and 7. 2 The inscribed circle of the square holes shall be concentric with countersink or counterbore within 0.03 in (0.8 mm).
Standard

Countersunk Square Holes for Cutting Edges and End Bits

2006-02-05
HISTORICAL
J740_200602
This standard specifies the principal shapes and dimensions for countersunk square holes. To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further in SAE J737, J739 and J1304. End bits are further defined in SAE J63.
Standard

Loading Ability Test Procedure - Scrapers

2011-10-27
CURRENT
J764_201110
This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.)
Standard

Drawbars--Crawler Tractor

1983-12-01
HISTORICAL
J749_198312
This SAE Standard provides recommended dimensions for drawbars for crawler tractors as defined in SAE J1057 (SEP88). It includes only those dimensions which will affect the attaching of towed equipment.
X