Refine Your Search

Topic

Author

Affiliation

Search Results

Standard

Braking Performance--Asphalt Pavers

2006-01-04
HISTORICAL
J2118_200601
This SAE Standard specifies brake system performance and test criteria to enable uniform evaluation of the braking capability of self-propelled, rubber-tired asphalt pavers. Service, secondary, and parking brakes are included. Application This document applies to self-propelled, rubber-tired asphalt pavers as defined in 3.1 and to these same machines while in service.
Standard

Braking Performance - Asphalt Pavers

2012-09-12
HISTORICAL
J2118_201209
This SAE Standard specifies brake system performance and test criteria to enable uniform evaluation of the braking capability of self-propelled, rubber-tired and tracked asphalt pavers. Service, secondary, and parking brakes are included.
Standard

Braking Performance - Asphalt Pavers

2018-10-04
CURRENT
J2118_201810
This SAE Standard specifies brake system performance and test criteria to enable uniform evaluation of the braking capability of self-propelled, rubber-tired and tracked asphalt pavers. Service, secondary, and parking brakes are included.
Standard

Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design - Truck and Bus

2008-01-14
HISTORICAL
J2698_200801
1.1 This SAE Recommended Practice covers the design and application of primary on-board wiring distribution system harnessing for surface vehicles. This document is intended for single phase nominal 120 VAC circuits that provide power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off. The power supply comes from alternative sources such as land-based grid power, DC-AC inverters and auxiliary power generators. The circuits may also provide power to improve vehicle performance through charging batteries or operating cold-weather starting aids. 1.2 This document is not intended to provide guidance for electric or hybrid electric vehicle wiring circuits. Refer to SAE J1673 for high voltage automotive wiring assembly design. 1.3 Engine block heaters are 120 VAC devices that are used on a multitude of vehicle platforms in addition to trucks with sleeper cabs. Generally, the engine block heater circuit is wired independent of hotel loads.
Standard

Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus

2018-10-04
CURRENT
J2698_201810
This SAE Recommended Practice covers the design and application of primary on-board wiring distribution system harnessing for surface vehicles. This document is intended for single phase nominal 120 VAC circuits that provide power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off. The power supply comes from alternative sources such as land-based grid power, DC-AC inverters and auxiliary power generators. The circuits may also provide power to improve vehicle performance through charging batteries or operating cold-weather starting aids.
Standard

Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus

2014-11-24
HISTORICAL
J2698_201411
This SAE Recommended Practice covers the design and application of primary on-board wiring distribution system harnessing for surface vehicles. This document is intended for single phase nominal 120 VAC circuits that provide power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off. The power supply comes from alternative sources such as land-based grid power, DC-AC inverters and auxiliary power generators. The circuits may also provide power to improve vehicle performance through charging batteries or operating cold-weather starting aids.
Standard

Curbstone Clearance, Approach, Departure, and Ramp Breakover Angles--Passenger Car and Light Truck

1996-06-01
HISTORICAL
J689_199606
This SAE Recommended Practice applies to rigid bumper or rigid structure points and flexible components of passenger cars, multipurpose passenger vehicles, and ligh trucks. This document is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. The purpose of this document is to provide minimum static design guidelines for curbstone clearnace, approach, departure, and ramp breakover angles. This is to minimize damage, if any, in normal vehicle use conditions. This document also encompasses all current worldwide regulations and requirements.
Standard

Curbstone Clearance, Approach, Departure, and Ramp Breakover Angles--Passenger Car and Light Truck

1989-12-01
HISTORICAL
J689_198912
This SAE Recommended Practice applies to rigid bumper or rigid structure points and flexible components of passenger cars, multipurpose passenger vehicles, and ligh trucks. This document is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. The purpose of this document is to provide minimum static design guidelines for curbstone clearnace, approach, departure, and ramp breakover angles. This is to minimize damage, if any, in normal vehicle use conditions. This document also encompasses all current worldwide regulations and requirements.
Video

SAE Eye on Engineering: Conti's Smart Backup Camera

2018-11-08
Every year in the U.S., about 300 people die, and 15 thousand vehicles suffer accidents, while backing up. In this episode of SAE Eye on Engineering, Editor-in-Chief Lindsay Brooke looks at Continental's new intelligent backup camera that's small in size but huge in capability. SAE Eye on Engineering also airs Monday mornings on WJR 760 AM Detroit's Paul W. Smith Show.
X