Search Results

A new Low-Voltage Electromagnetic Riveting (LVER) machine has entered service at the Airbus UK wing factory in Broughton, Wales, in an assembly workcell for A320 family wing panels. The machine is based on existing Electroimpact technology but incorporates numerous design modifications to process tools, fastener feed hardware, machine structure and the control system. In the first months of production these modifications have demonstrated clear improvements in fastener installation cycle times and machine reliability.

Electroimpact developed an end effector for Airbus UK, Ltd. for use on a Kuka KR350 robot provided by Airbus UK. The end effector is referred to as the DDEE (Drill and Drive End Effector), and incorporates four main functions. The end effector pushes up on a wing panel with programmable pressure, drills a hole with a servo-servo drill, inspects the hole with a servo ball-type hole gauge and then drives a pin-tail style lockbolt into the hole. The end effector is being used as part of a development and feasibility study for incorporating automation into the wing panel manufacture process.

The A380 aircraft is the largest passenger aircraft ever built and an appropriate machine was required to accomplish the fastening of the wing plank to stringer and buttstrap joints. The lower wing panels are curved along the length and move 1.42m out of plane. All previous E4000 machines had clampup heads that would extend and retract whatever distance was required to contact the wing panel. To improve toolpoint alignment, Electroimpact added a Z-axis that moves the yoke in order to reduce the necessary travel envelope of the clamp table axes and to cause them to clamp in the same plane regardless of panel position along the Z-axis.

The Horizontal Automated Wing Drilling Equipment (HAWDE) machine is an enabling technology for automated drilling of large aircraft parts. HAWDE is a five axis drilling machine that operates over the upper and lower surfaces of eight wings, each more than 40 meters long and four stories tall. The machine accesses the entire A380 wing using a combination of elevators and a machine transporter that carries the machine from surface to surface. HAWDE drills holes in spars, butt splices, and rib feet in the wing box final assembly jigs for A380.

The Airbus A340-600 wing panel manufacturing system, which entered production in 1999, represents a major milestone for automated aircraft assembly. The new A340-600 system builds upon the success of the E4000 based A320 wing panel assembly system, which was introduced into production three years ago. The new A340-600 system consists of two 440 ft. assembly lines. One produces upper wing skin panels and the second produces lower skin panels. Each line consists of three fully automated CNC controlled flexible fixtures placed end to end serviced by two E4100 CNC assemble machines. Each fixture accepts multiple wing panels and can be automatically changed between the different configurations. Stringers are located and held using clamps mounted to “popping posts”. These posts automatically drop out of the machine path into the floor to provide clearance for complete stringer to skin fastening.