Search Results

Fault-tolerance in commercial aircraft applications is typically achieved by redundancy. In such redundant systems the primary component is checked before the start of a flight to see if it operates correctly. The aircraft will not take off unless the primary is functioning. Airplane manufacturers must certify the airplane systems to be safe for flight. One means of safety certification is by safety analysis which shows that the probability of failure in a typical flight is bounded. The probability bound requirement for a system is based on the criticality of system failure. Usually backup components are checked at intervals that span multiple flights. The first backup may be checked more frequently than the second or higher levels. This leads to flights where the system may have latent faults in the backup components. The probability of failure in such cases varies from flight to flight due to the different exposure times for components in the system.

Developing the most advanced wing panel assembly line for very high production rates required an innovative and integrated solution, relying on the latest technologies in the industry. Looking back at over five decades of commercial aircraft assembly, a clear and singular vision of a fully integrated solution was defined for the new panel production line. The execution was to be focused on co-developing the automation, tooling, material handling and facilities while limiting the number of parties involved. Using the latest technologies in all these areas also required a development plan, which included pre-qualification at all stages of the system development. Planning this large scale project included goals not only for the final solution but for the development and implementation stages as well. The results: Design/build philosophy reduced project time and the number of teams involved. This allowed for easier communication and extended development time well into the project.

With the recent development of a multi spindle flex track drilling system for aerospace applications, the challenges of testing and implementation on existing airplane programmes require unique technical methodologies and solutions. This paper discusses the technical approach, problems encountered and methodologies/solutions used to successfully implement a multi spindle flex track drilling system for circumferential splice drilling on the 777 airplane. The multi spindle system uses varieties of flex track carriages attached to flexible vacuum tracks for wide inside drilling. The hardware and software challenges encountered during the interfacing of the multi spindles are discussed as well as the complex problem of indexing and locating all detailed components of the splice accurately and with high repeatability.