Search Results

Gearing load spectra data collected under actual working conditions help a designer predict the fatigue life of power train components. Considerable time was required in the past to collect and reduce these data to a form suitable for design use. A vehicle mounted instrumentation system consisting of a strain gaged shaft, a shaft encoder-slip ring assembly, and an amplitude distribution analyzer, was developed which performs load measurements. At the test's conclusion, it provides a spectrum analysis in printed histogram form.

THIS paper presents results which will answer many of the problems facing an engine manufacturer in the selection of the most suitable types and sizes of superchargers to use with a line of engines. Although performance curves of production model diesels are available, decisions are still needed in choosing peak supercharging pressures, drive means, and size and effectiveness of intercoolers, if any. The author describes the use of a typical model to determine response to variation in intake and exhaust conditions, resulting in data which will assist in evaluating engine potentials with any system of supercharging. Thus, supercharger selection for a particular line of engines is aided by knowledge of engine characteristics as a second-stage compressor.

The heavy-duty truck industry has seen the need for a change in the concept of transmission design for many years. Several improvements have been made and others attempted, but greater improvement is needed to match the engine's delivery to the vehicle's demand. Driver performance can be improved and fatigue reduced by lowering the effort and skill required to make smooth, consistent starts and ratio changes. This paper discusses a solution to this need in the design and development of a semi-automatic, pneumatically controlled, constant mesh transmission.

SETTING ratings for diesel engines takes laboratory testing and field experience for critical parameters such as smoke, piston temperature, and exhaust temperature. Rating is based upon theoretical considerations, plus the approval of the engine itself. Factors in rating considerations include a knowledge of the application of the engine, and whether its use is to be intermittent or continuous. Ratings by the manufacturer are not always accepted by the engine user, however. The user will run the engine at the load most profitable for him, which may be above or below that recommended by the manufacturer.

Recent developments in engine designs have produced engines that have shorter response time, thus making it increasingly difficult to control speed. Dynamic response of the engine and governor system is usually neglected when designing a governor. The recommended procedure for designing an engine governor is to develop a preliminary static design of the governor, analyze the engine using frequency response, mathematically analyze the static design of the governor, similate the two analyses on an electrical analog computer, and then determine from the computer results the changes that are necessary to get a satisfactory governor design.

A single-shaft, simple-cycle gas turbine engine has been developed to power 200 kw alternators for standby power and for applications where heat is needed. The engine was designed to be sold and serviced by distributors of earthmoving and industrial machinery. Where feasible, design practices of industrial piston engine powered generator sets were incorporated to facilitate installations of combinations of engine types, and to limit novel and unfamiliar features of the basic turbine engine to those that were considered essential. Individual components and complete engines, initially developed by a research group, have been subjected to a wide variety of laboratory tests to measure performance and develop reliability.

Two high specific output diesel engines designed for the Military -- the LVDS-1100 and LDS-750 engines, which are of V-8 and 5-cyl in-line configuration, respectively -- were developed by Caterpillar Tractor Co. under contract with U.S. Army Tank Automotive Center at Detroit Arsenal. This paper covers the development work, also sponsored by ATAC, required to adapt these engines for operation using regular grade gasoline in addition to the diesel and CIE fuels for which they were originally designed. Test techniques used, a description of some interesting combustion systems tried, and data obtained with the selected arrangement are included. The engine has excellent performance and starting characteristics with any of the three fuels.

Modern data acquisition methods combined with new testing and analysis techniques are revolutionizing product design and development. Detailed analysis of recorded vehicle drive-line data has given today's engineer new insights into drive-line dynamics. This paper discusses how vehicles can be analyzed as a series of torsional springs and inertia masses. A two axle, 300 hp, 15 cu yd earthmoving tractor scraper (model 621) is used to illustrate significant factors. Main emphasis is on drive-line resonant torsional vibrations and shock loading. Diesel engines as torsional vibration exciters and transmission clutches as the major shock load producers are covered in some detail. How analog computers can effectively be used to facilitate vehicle development is briefly discussed.

A new 2-ring piston package has been developed which has proven successful in internal combustion engines. The need for a compact piston arrangement is discussed along with the steps followed to arrive at excellent oil economy. The paper presents other advantages related to cost savings, lower wear, and reduced engine friction. The paper discusses applications of the compact piston package along with its advantages in designing compact engines.

This Paper: 1. Shows that the present spherical rod end manufacturer's rotational tests, which are intended to select the best bearing material, do not necessarily select the best materials for the push/pull linkage requirements of earthmoving machinery. 2. Emphasizes the need to perform push/pull comparative testing as defined in SAE J1367 on spherical rod ends to determine acceptable materials for earthmoving equipment application. This test is in contrast to rotational testing presently being performed by spherical rod end manufacturers.

For some time, Caterpillar Tractor Co. has been marketing a new transmission control system for wheel-tractor scrapers and off-highway trucks. The new system is composed of an electronic microprocessor control box coupled with an individual clutch modulation hydraulic control. This system has resulted in increased vehicle productivity, improved reliability and serviceability, decreased complexity, and increased commonality of parts. This paper describes the concept, design, and test and evaluation process used to develop the new controls before production.

THE CATERPILLAR FOLDED CORE RADIATOR IS A NEW RADIATOR FOR VEHICLES AND STATIONARY ENGINE APPLICATIONS. THE MAJOR OBJECTIVES OF THIS DESIGN ARE TO GIVE THE USER AN INCREASED VALUE COOLING SYSTEM BY REDUCING RADIATOR REPAIR COSTS AND IMPROVING AIR-SIDE PLUGGING RESISTANCE. AS WELL AS PROVIDE THE VEHICLE DESIGNER WITH INCREASED APPLICATION DESIGN FLEXIBILITY. THIS IS TO BE ACCOMPLISHED WHILE MAINTAINING PERFORMANCE AND LIFE GOALS ASSOCIATED WITH THE CONVENTIONAL RADIATOR. THE FOLDED CORE IS A MODULAR DESIGN HAVING THE MODULES INSTALLED AT AN ANGLE TO THE FAN AIR STREAM RESULTING IN THE FOLDED APPEARANCE. COMMON MODULE SIZES ARE USED ACROSS THE MANY RADIATOR APPLICATIONS REDUCING INVENTORY REQUIREMENTS AT THE ASSEMBLY PLANT AND PARTS DEPOTS AND INCREASING INDIVIDUAL MODULE PRODUCTION VOLUME. THIS RADIATOR DESIGN IS REVIEWED FROM CONCEPT TO PRODUCTION.